Author Topic: Taming '92 Winchester ejector.  (Read 404 times)

0 Members and 1 Guest are viewing this topic.

Offline gazz

  • Trade Count: (0)
  • Member
  • *
  • Posts: 54
Taming '92 Winchester ejector.
« on: March 23, 2006, 06:14:22 PM »
Hi,
The only thing I don't like about '92s is the way they just about put the ejected case into orbit!
This is easily cured by replacing the original ejector spring with a weaker one from the hardware store.
It needs to be the same length and outside diameter as the original but made of lighter gauge wire. They only cost a couple of bucks so you can experiment to get the strength you want.
My rifle,now, drops the shells a couple of feet away from my right boot.
Cheers,
gazz.