« previous next »
Pages: [1]   Go Down

Author Topic: 7 TCU 100 gr.HP for varmits  (Read 538 times)

0 Members and 1 Guest are viewing this topic.

Offline Preacherman

  • Trade Count: (31)
  • Contributor
  • ***
  • Posts: 352
  • Gender: Male
7 TCU 100 gr.HP for varmits
« on: March 27, 2006, 02:55:04 PM »
Any one ever use 100 gr hps on varmits? If so I need some loading info.
I have a 10 inch barrel,hornady bullets,h322 or 4895 powder.
Any help will be greatly appericated.
ps I'm new at this contender thing.
Logged
Acts10:13

Offline MnMike

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 493
7 TCU 100 gr.HP for varmits
« Reply #1 on: March 27, 2006, 05:37:34 PM »
Use the 4895. Max load (start lower) 36.9 gr. C.O.L. 2.760" Vel 2650fps. I use Win 748, max load (start lower) 40.3 gr Vel 2700 fps. Velocities listed are for a 14" barrel.

mike
Logged
Mike Ellestad

Offline MnMike

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 493
7 TCU 100 gr.HP for varmits
« Reply #2 on: March 28, 2006, 01:15:39 PM »
I goofed!!!!

I had been reading a 7-30 post and for some reason thought you were asking about 7-30, not 7 TCU.

The loads I gave are for 7-30 DO NOT USE THEM!

Correct loads 7TCU

Max of 28.1 gr of H322 2100FPS

Max 748 30.8 gr 1900 fps

Max 4895 30 gr 2071 fps

I thought the post did not go out, or I would have responded sooner.

sorry
mike
Logged
Mike Ellestad
Pages: [1]   Go Up
« previous next »