Author Topic: Picked up a new Encore Pro-Hunter ML today (Read 940 times)

Redhawk1 · « **on:** March 24, 2006, 08:16:27 AM »

I just came back from the gun store with a New Encore Pro-Hunter 50 cal ML. Price was $725.00, I also picked up a Leupold 3X9X40 for it also. What I great set up, I can't wait to get to the range with it.

NEW222 · « **Reply #1 on:** March 24, 2006, 12:25:14 PM »

Nice, very nice. Lucky you. Can't wait to hear the performance report, as this is the next ml on my shopping list.

slave · « **Reply #2 on:** March 24, 2006, 01:17:04 PM »

Same here,
Redhawk you got to let us know?

Two Bears · « **Reply #3 on:** March 25, 2006, 06:35:41 AM »

Ship it over to me and I will field test it for you :gulp:

I hope that you will like it!

toytruck · « **Reply #4 on:** March 26, 2006, 08:06:45 AM »

Redhawk,
Have you seen any .50 ProHunter ML barrels for sale yet? price?

Redhawk1 · « **Reply #5 on:** March 26, 2006, 10:05:04 AM »

I have not seen any of just the barrels. Contact TC and see if they can give you a list of distributors or if you could get them direct.

rickyp · « **Reply #6 on:** March 26, 2006, 10:22:18 AM »

tell us about the hammer and what is the real diffrance between the encores

Redhawk1 · « **Reply #7 on:** March 27, 2006, 12:31:49 AM »

The difference is, you can move the hammer off sets to either your left or right, or you can leave it dead center. I like to mount my scopes as close to the barrel as possible so I have the hammer off set to the right. The only other difference between the frames is the Pro-hunter engraving on the frame. The M/L barrel is fluted, comes with a T-handle rod and the 90 degree breech plug. The other thing that I like is the feel of the new stock and forearm. When I get to the range I will give a report back.

Two Bears · « **Reply #8 on:** March 29, 2006, 04:09:17 AM »

What is this 90 deg breach plug?

Can you post a picture of it?

Redhawk1 · « **Reply #9 on:** March 29, 2006, 07:46:56 AM »

It is different from the standard breech plug. All you have to do is rotate the breech plug 90 degrees and out it comes. Here is a site with a pic.
http://www.tcarms.com/TC_HTML/TC_New_PHspecs.htm