Author Topic: Dropped my .270 Winchester - Cracked the fa (Read 620 times)

Land_Owner · « **on:** April 25, 2006, 11:23:02 AM »

...now there is a fracture from the bolt indent in the walnut going forward about 4 inches.

How should I go about "wood welding" the stock. It would seem counter productive to "spread" the split for insertion of glue.

Any suggestions?

Land Owner
---------------------
If it was easy, anybody could do it...

corbanzo · « **Reply #1 on:** April 25, 2006, 05:07:17 PM »

You could try and put some type of rubber bushing around the crack, as to be able to force glue into all parts of the crack, and then put some rubber butted clamps on it for a couple of days.

257 roberts · « **Reply #2 on:** April 26, 2006, 12:21:40 AM »

what brand of 270 do you have?

Land_Owner · « **Reply #3 on:** April 27, 2006, 03:46:29 PM »

Model 70 - Classic Featherweight.

257 roberts · « **Reply #4 on:** April 27, 2006, 04:51:18 PM »

You can get a new one from Walker Arms co.

killdeer · « **Reply #5 on:** April 27, 2006, 05:27:59 PM »

I would pose this question in the gunsmithing forum if you haven't already.

Land_Owner · « **Reply #6 on:** April 29, 2006, 05:10:52 PM »

...very well. I have done just that. Thank you.

killdeer · « **Reply #7 on:** April 29, 2006, 05:34:10 PM »

Your welcome and good luck.