« previous next »
Pages: [1]   Go Down

Author Topic: reloading the 375 H&H  (Read 300 times)

0 Members and 1 Guest are viewing this topic.

Offline jrkrk

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 201
reloading the 375 H&H
« on: April 09, 2006, 10:36:55 AM »
Question on primer in th 375 H&H. I am using the hornady 270gr apire point with 61gr. H4895 being it is magnum cartridge do I have to use a magnum primer or can I use a federal(210) large rifle primer. My reason for asking is that I have a lot of large rifle primers but no magnum rifle primers. Not a big deal to go out and get them but just wondering. Thanx :grin:
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
reloading the 375 H&H
« Reply #1 on: April 09, 2006, 12:35:46 PM »
I use Remington 9-1/2M Primer
Logged

Offline PaulS

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1120
reloading the 375 H&H
« Reply #2 on: April 09, 2006, 03:45:38 PM »
jrkrk,
With H4895 the primers you are using are fine. The powder is one of the easiest igniting and even in a magnum case you shouldn't have any problems with a standard primer.
Logged
PaulS

Hodgdon, Lyman, Speer, Sierra, Hornady = reliable resources
so and so's pages on the internet = not reliable resources
Alway check loads you find on the internet against manuals.
NEVER exceed maximum listed loads.

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
reloading the 375 H&H
« Reply #3 on: April 10, 2006, 02:13:18 AM »
The load data I use specifies the Federal magnum primer, so that's what I use.
Logged
Safety first
Pages: [1]   Go Up
« previous next »