Author Topic: encore trigger job (Read 913 times)

GRIMJIM · « **on:** June 09, 2006, 04:55:54 PM »

thought aybe someone could use this:

http://www.bellmtcs.com/

GRIMJIM · « **Reply #1 on:** June 09, 2006, 04:58:01 PM »

website came up censored. don't know why, but worked when i clicked it. downloadable instructions to do a trigger job.

Tommyt · « **Reply #2 on:** June 09, 2006, 05:14:15 PM »

Quote from: GRIMJIM

website came up censored. don't know why, but worked when i clicked it. downloadable instructions to do a trigger job.

Good of you to try and help out with that LINK But GB and Him had a bad fallen out to make a long story short I think you should remove it
No I am not the webb page police but I know it will get pooffed by the mods if you don't do it

TC Tommyt

Grumulkin · « **Reply #3 on:** June 10, 2006, 12:54:38 AM »

I sent my Encore frame to the censored person for a trigger job and he did a fine job on it.

GRIMJIM · « **Reply #4 on:** June 10, 2006, 05:58:45 AM »

sorry didn't know. how do i delete?

Javelina · « **Reply #5 on:** June 17, 2006, 12:49:55 PM »

Hello GrimJim,

Do yourself a favor and consider this gunsmith. He is hired on occasion by the T/C folks to 'smith for them at certain shooting events and knows Contenders, G2s and Encores better than anyone I know, including the person who's name gets censored here.

You won't go wrong with this gentleman, and you don't pay until after you have received the trigger back and you're satisfied with it - where else does that happen? That alone should speak volumes about his work. He has done about 15 or so triggers for me, Contenders, G2s and Encore. As long as he is alive, no one else will get a single penny of my trigger-job money. He is generally the least expensive person you will find to do the work also.

James D. Henry
32660 Amarylis Ave.
Barstow, CA 92311

tc.crafts@earthlink.net

Phone: 760-253-4497

I hope this is helpful. Safe and good shooting to you!

Javelina

GRIMJIM · « **Reply #6 on:** June 17, 2006, 03:55:25 PM »

javelina

thanks for the info. i printed it out for future use. i was just trying to share some info with people in case they wanted to try doing a trigger job themselves. didn't know about the falling out here, i'm relatively new to this site.
i built up a 10-22 recently and am really getting the gunsmith bug, so when i saw the free instructions on the trigger job i just wanted to share.
thanks again,
jim

Who Me? · « **Reply #7 on:** June 22, 2006, 06:34:21 AM »

I sent my new G2 to E. Arthur Brown in Alexandria, Minnesota.
https://www.eabco.com/tcref.html

They usually have a one week turn-around time, but the gunsmith went on vacation so mine took about 2 weeks. It came back with a lot better / lighter trigger pull. They charged $55 for labor and the total with shipping and sales tax came to about $61.

They also sell barrels, stocks, etc. for T/C

Who Me? · « **Reply #8 on:** June 22, 2006, 06:35:23 AM »

I sent my new G2 to E. Arthur Brown in Alexandria, Minnesota.
https://www.eabco.com/tcref.html

They usually have a one week turn-around time, but the gunsmith went on vacation so mine took about 2 weeks. It came back with a lot better / lighter trigger pull. They charged $55 for labor and the total with shipping and sales tax came to about $61.

They also sell barrels, stocks, etc. for T/C