scope rings for my ultra?

[FATTTTDADDY]

i have a 243 ultra  i have had sevral scopes on this gun both were to big and lust did not feel right. i bought a bushnell banner 3x9x40 i had a set of weaver quadlocks but they wont work with this scope to low  .what will work?

[quickdtoo]

Medium or high will be required to clear the hammer unless you make hammer modifications as detailed in the FAQ, I use medium Burris Signature Zees almost exclusively, but sometime highs are needed, just depends on the scope and mounting position.

Tim

[Mac11700]

I have a soft spot for my Leupold QRW rings..these are the high ones..but like Quick already said..most medium ones will work too depending on scope placement..



Mac

[cwlongshot]

Those are my favorites as well!! Leupold also makes a set with out the quick release feature, for a bit less cash.
 But these are by far my favorite for the handi's!! they are perfect height and very strong.

 Hi guys...been away for a while, hows everyone been?

 CW

[Datil]

I use High Loupold rifleman rings from Wally World.
 They are about $16 + Some times Med will work.
 Marv.

[stimpylu32]

I use Weaver med. on all my H&Rs now , tried the high and they were to tall , even tried a set of extra tall but needed a step ladder to see with  :-D ,the med. even work on a 6x24 x50mm Burska with pleanty of hammer room .

CW

I am glad to see you back buddy  

[quickdtoo]

If you make a slight modification to the hammer, you can use the low Leupold QRWs.

Tim

[stimpylu32]

Tim

You need to make up some of them and sell them to guys like me that have too many thumbs to do it ourselves .  :roll:  :roll:  :wink:

Honestly i like the looks of the lower scope on the handi's now if we can just come up with a diffrent type of mount , say a 2 peice and loose the ugly rail .

[quickdtoo]

Just send me your hammer and I'll grind it down for ya!! The harder part is the R&R, although after doing so many, it's really quite easy, it's the first one that's toughest!! :-D

Fred's 2 piece mount is great, but that's beyond the scope of the home gunsmith's capabilities. :?

Tim

http://www.angelfire.com/ma/ZERMEL/6x47html

[Dillohide]

I have the bushnell banner 3x9x40 on my 30-30 NEF and use the extra high weaver rings. For a 3x9 that's a fairly short scope.

[rms4570hr]

What about a tasco world class 3x9x50 on a 45/70 Gov't barrel.wanting to use the weaver med height rings or do i need to go with the weaver high's?



rms270hr

[quickdtoo]

Medium or high will be required to clear the hammer unless you make hammer modifications as detailed in the FAQ, I use medium Burris Signature Zees almost exclusively, but sometime highs are needed, just depends on the scope and mounting position.

Tim

[Dave Allen]

hello,i used the weaver extra high rings,seem to work fine...

[cwlongshot]

YES, Extra high in about any manufacturer will work....but many guys want the scope as low as possible with out interfeering with any funtionality. There are many combos that guys like.

As I said before, I prefer the Leupold ring, I am diffferent, I use Leupold scopes just about exclusively. Even then 90% of those are the 2X7X33 VXII variety. This scope fits about perfect with MED rings on my handi's.

Here is a pic of my 500 with this setup:




CW