« previous next »
Pages: [1]   Go Down

Author Topic: ???? about M94  (Read 851 times)

0 Members and 1 Guest are viewing this topic.

Offline holahead

  • Trade Count: (29)
  • A Real Regular
  • ****
  • Posts: 564
  • Gender: Male
???? about M94
« on: June 20, 2007, 02:53:49 PM »
Hello I was wondering if anybody knew if all the Winchester M94 Rangers are angle eject. I found some mounts that would allow me use my scope closer to the rifle right now I am using see thur mounts and the scope is way up there. I would like to use the open sights or a peep sight my eyes just are not that good anymore. Also is there a way to find out when Winchester rifles where made.



                                              THANKS
Logged

Offline Stan in SC

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 805
  • Gender: Male
Re: ???? about M94
« Reply #1 on: June 21, 2007, 01:02:12 AM »
Only the ones with an "AE" after the model number are angle eject.Some of the rangers are regular.

Stan
Logged
The more I listen,the more I hear....and vice versa.

45/70..it's almost a religion.

Offline Rangr44

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 2158
Re: ???? about M94
« Reply #2 on: June 21, 2007, 02:07:05 AM »
JMO, but I think your Ranger is too "new", for most Winchester DOB search sites - which, IIRC, usually seem to go up to only around 1970 or so.
A call to the big red W, with the serial number, ought to gt you the DOB.
Logged
There's a Place for All God's Creatures - Right Next to the Potatoes & Gravy ! !

Offline holahead

  • Trade Count: (29)
  • A Real Regular
  • ****
  • Posts: 564
  • Gender: Male
Re: ???? about M94
« Reply #3 on: June 21, 2007, 01:42:33 PM »
Thanks for the replys. I found a site when I did a goggle search that had the years made up to 1982. It said for every year after to add 100,000 so from what I come with my made was made in 1994. It does not have AE after the serial number so I guess the mount I wanted will not work.
Logged

Offline 35Rem

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 550
    • Remington Model 8 and 81 Autoloading Rifles
Re: ???? about M94
« Reply #4 on: June 22, 2007, 03:27:08 AM »
Does it have holes drilled in the top of the receiver? They should be plugged with a small screw.  One in the front of the bolt, two (one on each side) at the back of the bolt. All are in the receiver, not the bolt.
Logged
Remington Model 8 and 81 Autoloading Rifles
http://thegreatmodel8.remingtonsociety.com/
Vintage Semiauto Rifles
http://vintagesemiautorifle.proboards105.com/index.cgi

Offline holahead

  • Trade Count: (29)
  • A Real Regular
  • ****
  • Posts: 564
  • Gender: Male
Re: ???? about M94
« Reply #5 on: June 22, 2007, 09:48:08 AM »
Yes it is drilled and tapped for scope mounts. I have the see-thru mounts on it now. The base I was looking at allowed for the use of low rings but it would have to be angled eject.
Logged

Offline Is64.8

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
Re: ???? about M94
« Reply #6 on: July 03, 2007, 08:34:54 AM »
I may be wrong, but I think the mount will work for one made in 1994.

I got my first Winchester 94 in 1983 or 1984.  I think that was about the time they began making them with the angle eject feature.  I was almost a teenager then, so I might be wrong.  I bought several new Winchester 94 during the 1990's and none of them have AE in the model number like the first one my dad bought me in '83 or '84.

If you are currently using see-thru mounts on top of the 94, how does it eject them - angling to the right or straight up.  I would bet it is angling them to the right, and that the lower mounts you want would work.
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: ???? about M94
« Reply #7 on: July 13, 2007, 09:56:45 AM »
angle eject became standard in 1982 , easy to see ejector on the side of bolt not the top .
Logged
If ya can see it ya can hit it !
Pages: [1]   Go Up
« previous next »