« previous next »
Pages: [1]   Go Down

Author Topic: Copper Fouling  (Read 959 times)

0 Members and 1 Guest are viewing this topic.

Offline 35Rem

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 550
    • Remington Model 8 and 81 Autoloading Rifles
Copper Fouling
« on: August 22, 2006, 05:50:29 AM »
What's the best thing to use for a badly fouled barrel?


picked up a used rifle (308 cal) that has lots of copper in it.  What to do??

thanks
Logged
Remington Model 8 and 81 Autoloading Rifles
http://thegreatmodel8.remingtonsociety.com/
Vintage Semiauto Rifles
http://vintagesemiautorifle.proboards105.com/index.cgi

Offline TreyAzagthoth

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 149
  • Gender: Male
Re: Copper Fouling
« Reply #1 on: August 22, 2006, 07:55:54 AM »
I'd say try Barnes CR-10 or Outers bore foam cleaner.
Logged
I know what you're thinking. "Did he fire six shots or only five?"
Well, to tell the truth I shoot a Springfield XD so it doesnt really matter.

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Copper Fouling
« Reply #2 on: August 22, 2006, 08:43:00 AM »
I use Sweet's 7.62.. It really removes the jacket metal fouling.. Follow directions carefully and as an added benefit it gets rid of any corrosive primer fouling from old militarfy ammo.. good luck..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline DWTim

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 453
  • Gender: Male
Re: Copper Fouling
« Reply #3 on: August 22, 2006, 11:29:31 AM »
The most effective thing is PCB etchant solution. Trust me, you don't want to use it. The next most effective item would be a reverse-electroplating thingamajig, like the Foul-Out. My copper fouling issues are mild, so I use ammonia. 3% works fine for me.
Logged

Offline Shooter973

  • Trade Count: (0)
  • Member
  • *
  • Posts: 52
Re: Copper Fouling
« Reply #4 on: August 22, 2006, 12:31:22 PM »
Wipe Out works!!! ;D
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Copper Fouling
« Reply #5 on: August 23, 2006, 06:44:46 AM »
I love the FoulOut machine but in cases where the fouling is really bad even they reccomend that most of it be removed via standard methods.. It takes long enough as it is!
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline 7x57mm

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 194
Re: Copper Fouling
« Reply #6 on: August 23, 2006, 08:24:11 AM »
without a single doubt, WipeOut is the best, bar-none, copper remover that I have ever used. Used properly, the stuff is amazing, and it is non-corrosive toward the barrel. It can bubble finish, so you must use care in that department. Also, it is not inexpensive. Midway carries the stuff and it is easy to roder from them. Tom Purdom
Logged
Pages: [1]   Go Up
« previous next »