Author Topic: Keith bullets in .475???  (Read 587 times)

0 Members and 1 Guest are viewing this topic.

Offline Marsh1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 83
Keith bullets in .475???
« on: August 21, 2006, 03:24:11 PM »
I am trying to get a FA in .475 to shoot with a Lee mold with no luck. This mold is so out of round it shaves the grease grooves and even the shoulder of the bullet. I'm wondering it anyone have tried a semi-wadcutter Keith style bullet in this caliber and could it be made to wiegh at leaset 380grs? I would really prefer 400 grs but this Lee mold is impossible. I  would send it back but they would probably just send one just as bad or worse.
I wonder if LBT could make what I need, but don't know how to contact them.
Marsh

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18278
Re: Keith bullets in .475???
« Reply #1 on: August 22, 2006, 01:02:42 AM »
rcbs makes a real nice swc 400 grain mold but its a single cavity. Ive killed whitetail and wild boar with that bullet and it worked great and is an accurate bullet. Mount Baldy bullets also sells a real nice swc that Frank designed if you want to buy them.
blue lives matter

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: Keith bullets in .475???
« Reply #2 on: August 22, 2006, 02:16:40 AM »
I believe NEI has some good designs in .475 as well. Might check their online catalog. As for LBT, he's easy to contact - look a couple of lines below this forum and he's there. As for Lee, I'd send that mould back anyway. I just sent back a terribly out of round 45-70 mould and got back one that is perfect. They paid postage from their end, so it was just a couple of bucks to get a good mould instead of throwing away the one I had. They were very helpful and even called to make sure I am happy with my new one.
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline Marsh1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 83
Re: Keith bullets in .475???
« Reply #3 on: August 22, 2006, 02:23:13 PM »
Thanks guys. I see I have several options. Has no one heard or seen a Keith design? I suspect it would be too light.
Marsh

Offline LAH

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 320
Re: Keith bullets in .475???
« Reply #4 on: August 23, 2006, 03:21:59 AM »
Thanks guys. I see I have several options. Has no one heard or seen a Keith design? I suspect it would be too light.
Marsh

Here's one I designed for the 480 Ruger. It won't work in the short cylinder of the FA. But it does show a heavy Keith can be had in .475/476 dia...............Creeker



Dia. .475” .476”
OAL .960”
Meplat .370”
Crimp to Meplat .440”

This bullet is designed for the .480 Ruger.
Joshua 1:9

Offline Marsh1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 83
Re: Keith bullets in .475???
« Reply #5 on: August 23, 2006, 05:10:11 PM »
Good looking bullet LAH. A shame I can't use it in my FA. What does it weigh?
Marsh

Offline LAH

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 320
Re: Keith bullets in .475???
« Reply #6 on: August 24, 2006, 03:44:55 PM »
400 grains from 92-6-2. I think I'd try Lloyd's suggestion........Creeker
Joshua 1:9