Author Topic: .375 cast mold needed  (Read 894 times)

0 Members and 1 Guest are viewing this topic.

Offline Orddy

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
.375 cast mold needed
« on: September 26, 2006, 02:52:34 PM »
I have a Dan Wesson in .375 and would like a cast bullet in the area of around 220 - 225 using a gas check.  What do you recommend in a 2 cavity mold and how much are they?  Any help would be greatly appreciated ty.  gobber2@hotmail.com

Offline Veral

  • GBO Sponsor
  • Moderator
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1675
    • Lead Bullet Technology
Re: .375 cast mold needed
« Reply #1 on: October 01, 2006, 05:25:04 PM »
  I reccomend my WFN if you are going to hunt with the gun, the LFN if for target use only, and it will do very well on game too if you load stout loads.  Order a gas checked style if you want velocities over 1400 fps, and especially if the bore isn't a known performer with plainbase bullets.

  I'll make a two cavity for $125 or 4 cavity for $175, and shipping for either is $7.10 anywhere in the US.  Write me for foriegn shipping rates.
Veral Smith