www.GBOReloaded.com
Home
Help
Articles
Classifieds
Login
Register
Graybeard Outdoors (GBO Reloaded)
»
Ammo/Hand Loading Forums
»
Hand Loading for Rifles and Handguns
»
Got the load, need a velocity.
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Got the load, need a velocity. (Read 461 times)
0 Members and 1 Guest are viewing this topic.
Dusty Miller
Trade Count:
(
0
)
Senior Member
Posts: 2271
Gender:
Got the load, need a velocity.
«
on:
October 14, 2006, 11:43:23 AM »
SOMEWHERE I got a load consisting of 26 gr. of 2400 under a 335 gr. WLN bullet sparked with a Rem. 7 1/2 primer for the 454 Casull, but, there was no velocity available. If anybody has that information I'd appreciate having it posted.
Logged
When seconds mean life or death, the police are only minutes away!
OR-E-Gun Bill
GBO Supporter
Trade Count:
(
18
)
A Real Regular
Posts: 907
Gender:
Re: Got the load, need a velocity.
«
Reply #1 on:
October 15, 2006, 02:47:32 PM »
Found a load using 26 gr. of H110 instead of the 2400 you listed for the 454 Casull with WLN bullet. It does show velocity of 1500 fps for that load.
http://www.handloads.com/loaddata/default.asp?Caliber=454%20Casull&Weight=335&type=Handgun&Order=Powder&Source=
Logged
PaulS
Trade Count:
(
0
)
Senior Member
Posts: 1120
Re: Got the load, need a velocity.
«
Reply #2 on:
October 16, 2006, 06:43:49 AM »
The only way to know what velocity you are getting from your gun with any load is to use a chronograph. They can be purchased for less than a good press and all of them are accurate enough for the average shooter. My favorite brand is Pact. A chronograph won't help you develop a safe or accurate load but it will tel you how fast your bullet is going so you can use ballistic software to predict your trajectory.
Logged
PaulS
Hodgdon, Lyman, Speer, Sierra, Hornady = reliable resources
so and so's pages on the internet = not reliable resources
Alway check loads you find on the internet against manuals.
NEVER exceed maximum listed loads.
Dusty Miller
Trade Count:
(
0
)
Senior Member
Posts: 2271
Gender:
Re: Got the load, need a velocity.
«
Reply #3 on:
October 18, 2006, 01:24:22 PM »
I have the chrono, just thought I'd see if I could get some figures to know if I'm close to where I want to be with this load before I load up a bunch of them and find they are screamers. I'd prefer a slow to medium load.
Logged
When seconds mean life or death, the police are only minutes away!
PaulS
Trade Count:
(
0
)
Senior Member
Posts: 1120
Re: Got the load, need a velocity.
«
Reply #4 on:
October 18, 2006, 07:31:05 PM »
Like I said the only way to know how fast the loads are in your gun is to run a few of them over a chonograph. there is no guaranty that my gun will be close to yours in velocity. load 5 up and shoot them or find an accurate load and then run a few over the chronograph.
Logged
PaulS
Hodgdon, Lyman, Speer, Sierra, Hornady = reliable resources
so and so's pages on the internet = not reliable resources
Alway check loads you find on the internet against manuals.
NEVER exceed maximum listed loads.
jro45
Trade Count:
(
0
)
Senior Member
Posts: 1923
Re: Got the load, need a velocity.
«
Reply #5 on:
October 19, 2006, 02:39:00 AM »
Every time I load a new load for whatever Handgun or rifle. I load three extra and shoot them threw my conagraph. That way any change in velocity I'll know.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Graybeard Outdoors (GBO Reloaded)
»
Ammo/Hand Loading Forums
»
Hand Loading for Rifles and Handguns
»
Got the load, need a velocity.