Author Topic: Power Belt accuracy?  (Read 1013 times)

0 Members and 1 Guest are viewing this topic.

Offline mantihunter

  • Trade Count: (4)
  • Member
  • *
  • Posts: 61
Power Belt accuracy?
« on: November 02, 2006, 03:41:21 AM »
Anyone have much experience shooting Power Belts in a T/C or Knight. I know CVA promotes them heavily, but I've always shot sabots. (Hornady XTPs, Barnes MZs or T/C Shock Waves) These all shoot great, but are a pain to seat, especially in the Black Diamond. They seem to seat a lot easier in the Knight Bighorn. How do the Power Belts group and is terminal performance good?
Any comments would be appreciated.

Offline elkstalkr

  • Trade Count: (19)
  • Avid Poster
  • **
  • Posts: 241
Re: Power Belt accuracy?
« Reply #1 on: November 02, 2006, 04:15:51 AM »
My experience.

They shoot and load great, but their performance on game is undependable.

This has been well hashed out on many forums, you will get a wide range of opinions on thier performance.

Offline Biff Mayhem

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 223
  • Gender: Male
Re: Power Belt accuracy?
« Reply #2 on: November 02, 2006, 05:51:28 AM »
Anyone have much experience shooting Power Belts in a T/C or Knight. I know CVA promotes them heavily, but I've always shot sabots. (Hornady XTPs, Barnes MZs or T/C Shock Waves) These all shoot great, but are a pain to seat, especially in the Black Diamond. They seem to seat a lot easier in the Knight Bighorn. How do the Power Belts group and is terminal performance good?
Any comments would be appreciated.

You can buy replacement plastic sabots to ease loading. Harvester and MMP both offer easy-loading sabots. You can purchase the Harvesters doing a Google search -- or purchase the MMP HPH-24 or MMP 3 Petal EZ-load after asking for them specifically via a phone call. The phone number can be found at:
 http://www.mmpsabots.com
Keep that ML smokin'
Dave

Offline kidolds

  • Trade Count: (0)
  • Member
  • *
  • Posts: 31
Re: Power Belt accuracy?
« Reply #3 on: November 02, 2006, 02:17:57 PM »
I shoot them exclusively in my G2 T/C 45. they are the only load I can reload a 3rd time with out cleaning the barrel. I have tryed T/C schoke waves and BENT the rod. same thing in the T/C Encore 45. as far as My 50cal I shoot 240XTP for the price I do shoot it alot more. My 12yr old Daughter shoots the G2 in 45cal. 190gr 75gr pellets with good accercay

Offline S.S.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2840
Re: Power Belt accuracy?
« Reply #4 on: November 03, 2006, 06:58:46 AM »
CVA promotes them, but they are not very accurate in my Optima?
Vir prudens non contra ventum mingit
"A wise man does not pee against the wind".

Offline slave

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 287
  • Gender: Male
Re: Power Belt accuracy?
« Reply #5 on: November 03, 2006, 10:09:10 AM »
Can not psot on performance because my Encore will not shot them. I love how they load but can not get a group. Thus I have never hunted with them.
keep your powder dry !!!

Offline tscott

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 561
Re: Power Belt accuracy?
« Reply #6 on: November 03, 2006, 12:20:44 PM »
The season opens for me tomorrow 1st Sat. in Nov, as it has since I started muzzleloading hunting 5 years ago. 5 shots over the years. I don't know from fragmentation, disintegration, pass through, performance balistics, run off after shot. I guess some of the spent bullets were in some of the 5 gut piles. I did recover 1 bullet perfectly mushroomed in the far shoulder. I undrestand bad groups. I wouldn't have that either! I never cared about bullet mumbo jumbo. Shot placement. If I don't place the bullet behind the shoulder, then I don't expect the bullet to save my tail. 295 Powerbelts have been perfect for me. No deer has gone 5 yards!

Offline poncaguy

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2751
  • Gender: Male
Re: Power Belt accuracy?
« Reply #7 on: November 03, 2006, 12:45:48 PM »
I have good luck with the 295's and 348 grain Powerbelts in my Encore............

Offline Smokepole cowboy

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
Re: Power Belt accuracy?
« Reply #8 on: November 03, 2006, 01:51:52 PM »
I have tried all weights available in my Encore and couldn't get any decent groups no matter what weight or powder combination I tried. 
They loaded very easily though.

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
Re: Power Belt accuracy?
« Reply #9 on: November 03, 2006, 02:10:14 PM »
I am going to try the 348`s/405`s and 444`s in my Sidekick next spring and see how they do. Jack.

Offline tscott

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 561
Re: Power Belt accuracy?
« Reply #10 on: November 04, 2006, 10:15:17 AM »
My 295gr Powerbelt was not in today's buck gut pile. It was in the tree behind the pass through neck shot. 75 yards perfect accuracy. 90gr 777. New Winchester 777 209 primers. Conventional shotgun primers push load forward slightly before ignition on powerbelts. Thus the crud ring, and possible suspect accuracy!

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
Re: Power Belt accuracy?
« Reply #11 on: November 04, 2006, 12:24:36 PM »
That is good info!! If they get these 209 primers right, as it seams the 777 primers are working, the crud ring and accuracy should and seam to get better accordingly :)Jack.

Offline eye shot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 665
    • Mike's Obituary
Re: Power Belt accuracy?
« Reply #12 on: November 06, 2006, 02:34:35 PM »
The 295 gr. Powerbelts grouped good at 50 yrd's but the 300 gr. Shock Wave grouped better at a 100 yrd's. I use the crushed rib Harverster sabot with the Shock Wave and they load just about as easy as the Powerbelts!
RIP Mike. Died on July 14th, around 2am, with his family at his side, he went peacefully to be with god.

http://www.sent-trib.com/obituaries/michael-l-schulte