Author Topic: Swed sporterization  (Read 766 times)

0 Members and 2 Guests are viewing this topic.

Offline Ruskin

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 365
Swed sporterization
« on: November 06, 2006, 03:57:15 AM »
I have a 6.5 Swede Oberndorf.  I want to sell it; however, I have a couple of females that might want a rifle to shot.  What would one do to sporterize?

Stock

Barrel

Sight/scope

Trigger

I have seen some on this site that are impressive.  What was done?

Offline Cheesehead

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3282
  • Gender: Male
Re: Swed sporterization
« Reply #1 on: November 06, 2006, 12:08:20 PM »
I had a professional quality gunsmith shorten, recrown, smooth and reblue the barrel, replace the trigger, drill and tap for scope mount  bend the bolt handle and flatten the knob Abolt style and I modified and refinished the stock then added a Leopold scope and related hardware. It is beautiful and extremely accurate with mild recoil. Could have bought a new gun for what it cost, this Swede rifle is almost 100 years old.

Cheese
Nothing in the world is more dangerous than sincere ignorance.

Offline Ruskin

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 365
Re: Swed sporterization
« Reply #2 on: November 07, 2006, 04:12:12 AM »
Can you show picture of stock?  I am interested in how it came out.  It could change my mind about buying a new stock. 

Can you describe what you changed in stock?

Offline james

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 798
  • Gender: Male
Re: Swed sporterization
« Reply #3 on: November 07, 2006, 10:04:06 AM »
If your Obie has matching numbers, it might be worth more as is.   I bought a Kimber sporterized swede rather than alter my elm stocked m38 or matching m96.  The Kimber has a Timey trigger, low swing safety, bent bolt, and is glass bedded in a ramline stock. The follower was ground so it doesn't hold the bolt back after the last round.   The steps have been removed from the barrel and the barrel and receiver has a matt finish.  It was drilled and tapped and I have an old Weaver 3 x 9 on it. The Iron sights were removed.   I can't remember for sure but I think I have less than $350 in the Kimber. At todays labor costs, you will have more than that in the work to customize your Swede.   I am always interested in an original Swede so shoot me a pm if you decide to dispose of it.  I have my kimber loaned out to a youth for a youth deer hunt at the present so I can't take pictures of it. 
james

Offline S.S.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2840
Re: Swed sporterization
« Reply #4 on: November 07, 2006, 10:10:23 AM »
Sell Swede to one of the folks on the Military Surplus Forum
and Put that money towards a different rifle. Decent Swedes are getting scarcer by the day
and by sporterizing you will kill any collectors value. unless you do an incredible job
of sporterizing! Either way, it is extremely difficult to get your money back out of a sporteried
Mil-Surp if you choose to part with it. At the end of the day, it wil still be a chopped mil-surp no matter how pretty you make it. The  Oberndorf rifles were the earlier models before the Swedish factories started producing them so the value should be pretty decent as a collector.
The instant you cut into it that value is gone especially if the Serial numbers match.
Vir prudens non contra ventum mingit
"A wise man does not pee against the wind".

Offline Cheesehead

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3282
  • Gender: Male
Re: Swed sporterization
« Reply #5 on: November 07, 2006, 02:55:44 PM »
I simply shortened the stock to a tradition length in the forearm area, removed all upper stock parts, then sanded and sanded, applied a walnut stain then sander sealer then a little more sanding then several coats of satin varnish. A friend applied a baked on black finish on the but plate. It looks nice. I will post pictures as soon as I borrow my daughters camera. The barrel is stepped yet highly finnished which gives it a blunt yet interesting look.

Cheese
Nothing in the world is more dangerous than sincere ignorance.

Offline Slamfire

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1028
Re: Swed sporterization
« Reply #6 on: November 08, 2006, 01:56:34 AM »
Sell it and use the money to buy a Remington in .260. The ladies will like the look, and it has the same ballistics. Lack of ammo don't mean squat, take up loadin' your own.
Bold talk from a one eyed fat man.

Offline Ruskin

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 365
Re: Swed sporterization
« Reply #7 on: November 08, 2006, 05:50:20 AM »
I originally bought the swede to shoot the 6.5.  I am left handed and the right handed bolt did not suit me.  The Obie is a long range shooter.  To use it for a 100 yard or less shot, I would need to change the front sight.

When I was in the service, I bought a Savage 110 DL in .243.  I wanted to convert it to 6.5.  I found out the cartridge was too long.  I ordered a 110 left hand in 06.  It is an older version than my 1970 110DL.  After cleaning the 06, I used it last year.  It has found a nesting place in my gun safe.

Back to the .243.  I took it to a gunsmith in Ruskin, Florida.  He made a cut in the receiver to accomodate cartridge along with a new long magazine.  The bolt face was opened up, a timney trigger, and a shilling barell which is longer than facory by about 3+ inches.  It is topped with a 1.5-4.5 leuopold.

My last two break in rounds a 100 were the size of a pencil eraser.  I was using a cheap remington 140 gr bullet because you can buy a tubfull cheaper than a hornady or other premium bullet to use for break in.  I also have gone to varget at 35.5 grs.  I find varget will load every rifle cartridge I have.  Makes it simple to buy only one powder for 223, 30-30, 308, 243, 6.5 and 06.  I am pleased to own a Savage 110dl in 6.5 that is why I have an Obie in my safe.
.

Offline james

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 798
  • Gender: Male
Re: Swed sporterization
« Reply #8 on: November 08, 2006, 08:46:36 AM »
Yep, Varget is my favorite too.. for those calibers and 7mm-08.
james

Offline Cheesehead

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3282
  • Gender: Male
Re: Swed sporterization
« Reply #9 on: November 08, 2006, 03:26:00 PM »
Here are some pics of my 6.5 Swede. This gun shoots 2" at 200 yards. I love the finger grooves in the forearm.
Nothing in the world is more dangerous than sincere ignorance.

Offline Ruskin

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 365
Re: Swed sporterization
« Reply #10 on: November 09, 2006, 07:41:12 AM »
Nice job, will print pictures and talk to gunsmith and daughter in law.  What about the trigger?  Did you change it to cock on opening v closing?