Author Topic: What broadhead?  (Read 77812 times)

0 Members and 3 Guests are viewing this topic.

Offline JeffG

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1488
  • Gender: Male
What broadhead?
« on: April 20, 2003, 04:30:23 PM »
What broadhead do you use?  Why?  What has worked for you?? Let's swap some ideas...  Are you thinking of changing your broadhead?  What are you looking for? :D
Young guys should hang out with old guys; old guys know stuff

Offline Whodaheck99

  • Trade Count: (0)
  • Member
  • *
  • Posts: 59
What Broadheads?
« Reply #1 on: April 20, 2003, 05:08:24 PM »
There is only 1 Thunderheads, By NAP. I use 100, and 125 for deer, small hogs, bear. I use 150 Thunderheads, for big hogs, 2 blades. Cuts a big hole. I use160 Thunderheads, for Exotics, 3 blades. I will never change. They are the best.

Offline Dalton

  • Trade Count: (0)
  • Member
  • *
  • Posts: 76
What Broadhead.
« Reply #2 on: April 21, 2003, 02:52:28 AM »
I currently use the Magnus two blade 125gr. broadhead for deer hunting.  Why? It flys well with my setup and it's easy to sharpen.  I am a finger shooter and I use a Reflex Caribou.  The bow is very quiet and forgiving but it won't set any speed records.  I've found that these simple two blade designs work very well at my bow speed (about 220fps.).

In the past I have used Muzzys, Rocky Mountains, Satallites and more recently I tried the new Montec G5.  Provided they were sharp, they all worked but none were as easy to keep sharp as the Magnus.  The only thing I don't  use for deer is expanding broadheads.  At the slower velocities that my setup generates they just don't penetrate very well.

I use this same broadhead  for turkey hunting, the only difference is that I dull the blade.
"The beauty of the second amendment is that it will not be necessary until they try to take it away."---T. Jefferson

Offline longwinters

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3070
What broadhead?
« Reply #3 on: April 21, 2003, 11:39:34 AM »
I have always been a fan of Thunderheads and Muzzys.  Between my boys and I we shoot from 80 - 125 grain.  They fly great, penetrate well and leave good blood trails.
Life is short......eternity is long.

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
What broadhead?
« Reply #4 on: April 22, 2003, 10:27:15 AM »
I use Muzzys(4 blades,125 gr). Until they make a mechanical that will go thru bone the way the Muzzys do, I'll stick with what works for me. I've heard some horror stories at the local bow shop about mechanicals bouncing right back out the same hole they went in, without doing much damage after hitting bone.
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!

Offline ahunter55

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 117
    • http://members.sanasys.com/~jlaw/
broadheads
« Reply #5 on: April 24, 2003, 11:28:41 AM »
I have been Bowhunting Biggame for 45 years now.  I have used many over the years & try new ones almost yearly BUT from the time they came on the market in the 70s I have a Rocky Mountain Razor 125 gr. 3 blade when it is time to go hunting.  I have taken Elk, Black Bear, Caribou, Whitetail, Mule deer, Fallow deer, Red deer, Axis deer & sevearl Wild Hogs-most decent size-150# to 250#.  Oh, I have a few roasters too.
I have also taken several of these animals with traditional 60# recurve(Elk, Bear, Boar, Whitetail) & that head mounted on a 2117 or 2216 Aluminum shaft.  I shoot compound now @ 60# & they always do the job-I see no reason to change.
I was also a Pro shooter many years ago & owned 2 archery shops & lanes for 15 years, so, I have seen em all, good & bad.
Good luck in you choice.  
I have a saying thou-the less moving parts in the field is 1 less thing that can go wrong-especially if you are on a fly in trip.. Good hunting...
always thankful

Offline Daveinthebush

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1732
Thunderhead 125
« Reply #6 on: April 24, 2003, 04:17:14 PM »
Thunderhead 125 is the only one that I will use.  Drove one completely through a rear leg of a doe one time, through the lower body cavity and hit the other leg on the way out.  Still razor sharp and looked like new. :grin:
AK Bowhunting Certification Instructor
AK Hunter Certification Instructor
IBEP Bowhunting Certification Instructor

Offline JeffG

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1488
  • Gender: Male
What broadhead?
« Reply #7 on: April 24, 2003, 11:40:57 PM »
I used to use Thunderhead 125, and switched to Muzzy 90's 4 blade when I went to carbon.  I was looking for a flat shooting combo for shooting with one sight pin.  The setup has worked well for me on deer and one hog.  I really feel comfortable with the cut on impact of the Thunderheads and the Muzzy. :D
Young guys should hang out with old guys; old guys know stuff

Offline kodiak outdoors

  • Trade Count: (0)
  • Posts: 3
What broadhead?
« Reply #8 on: April 26, 2003, 08:31:49 AM »
i've shot the rocky 3-blades, thunderhead 3-blades, slick trick 4-blades, muzzy 4-blades, rocket expandables, and the new G5's.  i've killed animals with all but the G5's.  all in 100 grains.  i can shoot them all well, but i get the best arrow flight witht the new muzzy 4-blade 100's.  i think most all broadheads will kill an animal, it's the best combination to get your arrow to fly like a dart and hit the mark that counts.  just my opinion though!  just shoot straight with whatever tip you use.

Offline Arrroman

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 131
Which Broadheads?
« Reply #9 on: April 26, 2003, 04:34:11 PM »
Last year I used the 85grain Titanium Steelforce Head, it is a wide head for its weight, it passed through both shoulders of my deer at 20 yards. I shoot 30" GoldTipXT with 100grain fieldtips for practice and the 85grain broadheads printed in the same place as the practice heads for me.

Offline willis5

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 489
What broadhead?
« Reply #10 on: April 26, 2003, 05:17:22 PM »
What about mechanical broadheads? I am getting back into it, and I see a lot of people use them.
Cheers,
willis5
Cheers,
Willis5

Offline sweet old bill

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
What broadhead?
« Reply #11 on: May 04, 2003, 01:28:33 AM »
I sell some of the closed in flight BH, with no major problems. But for guys that are hunting hard, they all seem to want a good solid fixed blade BH. My number 1 seller last year was Muzzy,  then a new BH the rocket fixed blade steel head, it is small dia, but they have a new type of blade called bacon skinner blades, they sure seem to be sharp and fly just like a closed in flight. I used them on a 500 carbon shaft, and got 2 inch groups out to 45 yards. The other brands that have been discussed are all great fixed blade and I sell some of them each year. The key for fixed blade is making sure you have the bow set up for the BH. I use a big dirt pile and keep 3 arrows just for shooting BH. I make sure the bow is setup and fine tuned...

Offline daddywpb

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1136
What broadhead?
« Reply #12 on: May 23, 2003, 02:24:24 PM »
100 grain SteelForce Sabertooth's.

Offline Big

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 117
Broadheads
« Reply #13 on: May 28, 2003, 06:36:38 PM »
I have never lost a deer with my 90 grain, four blade (actually, 2 crossed blade) Muzzys.  52# compound bow, aluminum arrows, only 180 feet per second, and they've always come out the other side at some point.  Switched to 100g Thunderheads at the end of last season just to try something different.
"...the right of the people to keep and bear arms shall not be infringed."

Offline 2eagles

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
What broadhead?
« Reply #14 on: June 29, 2003, 04:01:04 PM »
I have used Thunderhead 125's and been very happy with them.  Any problems have been my fault, not the T-heads.  I still wonder if I should be using UBR (?) rings on my Beman 400's.  After seeing what my son did to his deer last year with 4 blade Muzzy 100's, I did buy some of those and will probably give those a try this year.  Jim

Offline Ohioyotecaller

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
What broadhead?
« Reply #15 on: July 06, 2003, 06:26:43 AM »
There is only one broadhead I will use...MUZZY.

Why????  Cause they work, they're tough, and they're ready to cut.  No mechanical crap to let you down, no rubber bands to break prematurely.  I've never had the blades come loose or come out in a deer.  All shots have been complete pass throughs.  I practice a lot and I'm very picky about the shots I take on deer.  If the shot is not perfect, I don't take it...period.

Since I began using Muzzy, I think I've only had to track one deer and it went 50 yards.  Last year, I watch a 7 point go down, the year before I watched a doe and an 8 point go down, the year before I had to track a mature spike (cull) about 50 yards.  On that deer, the broadhead cut dead center through a rib going in and cut through another going out.  I still achieved a complete pass through.  

As long as your bow is tuned properly, they will fly perfectly.  The reason a lot of bowhunters get planing is that their bow is out of tune.

Offline MathewsHNTR00

  • Trade Count: (0)
  • Posts: 1
What broadhead to use?
« Reply #16 on: July 08, 2003, 02:01:50 PM »
The absolute best broadhead on the market I have used is a MUZZY!  They fly incredibly straight, penetrate like no other, and have an unmatched blade locking system.  The farthest I have had a deer go when hit with a muzzy is 25 yards.  If you place them well, they don't go far at all.  Muzzy's really are "Bad to the Bone!"  I have tried many others and after being unsuccessful, came back to the best head on the market!
"Bowhutning is a passion for perfection and a way of life"

Offline 01magnatec

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
What broadhead?
« Reply #17 on: July 10, 2003, 07:08:43 AM »
Spitfire 100 grain.
Best broadhead i have ever had.
Anyone try the Crimson Talons yet?

Offline willis5

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 489
What broadhead?
« Reply #18 on: July 21, 2003, 11:57:49 AM »
I am going with Muzzy 100 3 blades. I had the opportunity to shoot them, thunderheads, and Magnus the other day, and my set up liked the Muzzy the best. It seems the more people I talk to say that you cannot go wrong with a Muzzy Whne it flies well for you.
Cheers,
Willis5

Offline Bulldog

  • Trade Count: (0)
  • Member
  • *
  • Posts: 27
What broadhead?
« Reply #19 on: July 25, 2003, 10:01:56 AM »
I tried muzzy's 4 blade 100 grns a month ago and they flew a foot left of where my field tips were. Then I took one of the blades out and made it a two blade. The shots hit like field points. I don't know if I should use these broadheads or buy some new ones. I am shooting an easton epic 400 shaft at 28 1/2 in. 3 four in vanes. 30 inch draw. in a Legacy set at 67#.
Does anyone have advice on a broadhead that will be best for my setup?

Offline Thomas Krupinski

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 823
What broadhead?
« Reply #20 on: July 25, 2003, 11:28:30 AM »
Bulldog,

Shoot them as four blades.  Sounds like your bow just needs to be tuned so that both the broadheads and field points fly to the same spot on the target.  

This is done by moving the arrow rest and/or the nock point.  I have had o do it on both of my bows to get the Muzzy 4 blade 100's and 125 to fly the same as the field points.

It takes a little while, but well worth it.

Offline opossum

  • Trade Count: (15)
  • Avid Poster
  • **
  • Posts: 137
What broadhead?
« Reply #21 on: July 28, 2003, 02:18:57 PM »
I use thunderhead 125 and bear razorheads 145. Tried the expanding heads shot a young doe through the shoulder and broke one of the blades off. Don't use them any more.

Offline ahunter55

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 117
    • http://members.sanasys.com/~jlaw/
bowhunt
« Reply #22 on: August 03, 2003, 01:51:53 PM »
I am headed for Shilo Friday on a Hog/ram combination hunt & 3 blade Rocky Mountain 125 gr. Razors are on the business end again.  Will post how I do when I get back.
always thankful

Offline Guybo

  • Trade Count: (0)
  • Member
  • *
  • Posts: 43
What broadhead?
« Reply #23 on: August 07, 2003, 01:36:26 AM »
I've used Muzzy, Wasp,and Thunderheads and find myself using nothing anymore but the Thunderheads. They tune well with my set-up and fly well from my bow and have the sharpest blades i've seen on any head as of yet. Any broadhead will do the job if it's put in the vitals from a well tuned bow no matter what kind it is imo.

Offline ronbow

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 271
  • Gender: Male
What broadhead?
« Reply #24 on: August 19, 2003, 04:41:42 AM »
I have used Thunderheads for about 8 years with GREAT results both in tuning and kill. Started with 125 gr then went to 100 gr and now use 85 gr. The heavier the BH is, the bigger the wound in the deer or hog. I droppend down to the lighter shafts only to pick up speed. I shoot Easton XX75 2213 at 26 in with slightly offset 4in. plastic out of my PSE Lightening Thunderbolt at 70 lbs. The Thunderheads fly accurately to my maximum kill range of 40 yards. I only have to raise my sight pins slightly from field point impact and the TH is right on. Oh yeah I make sure the three blades are in line with my three fletchs.

Offline ARMallardSlayer

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
What broadhead?
« Reply #25 on: August 19, 2003, 03:30:27 PM »
:D I have been using Spitfires but I'm going to give the Steel Forces a try this season.


I practice with 100 grain tips, will the 100 grain head fly the same or do I need to buy the 85 grain? :shock:
If you can't work em in close & git em in yo face with their orange landing gear down, don't bother takin the safety off!!!!!!!

ARMallardSlayer

Offline Crayfish

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 111
What broadhead?
« Reply #26 on: August 20, 2003, 08:30:18 AM »
I've been shooting Thunderhead 125's for probably 15yrs now and they've always performed very well for me.  This year I had an itch to scratch and will be testing some NAP "Shockwave" expandables.  They look impressive and in the tests I've read they are one of the fastest opening expandables around.  We'll see .... I'll be giving them flight tests in another week or so and if they shoot good will HOPEFULLY get a good field test this fall!

... Crayfish

Offline Sam

  • Trade Count: (0)
  • Member
  • *
  • Posts: 19
What broadhead?
« Reply #27 on: August 28, 2003, 10:55:37 AM »
I have been useing Thunderhead 125's for many years . They get the job done! I would switch to 100's but I have about 2 1/2 - 3 dozen of the 125's including about 6 that I use just for practice in the sandpit. This may not be the best head but for me it doe's it's job very well.
                                           Sam

Offline propredator

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 114
What broadhead?
« Reply #28 on: August 29, 2003, 04:54:53 AM »
I switched from the muzzy 3 blades to game tracker silver tips last year.I shoot beman 400 and 70#.The expandables gave me 4 more inches of penatration on my target and almost 10 more yards of flater arrow flight.Took 3 deer with these last year.
 Ive heard bad things about expandables,mostly about hunting high in the stand,but i dont get very high up.They punched through ribs good and torem up bad inside.
 The silver tips are not expensive and give good performance from what i have seen so far.

Offline jlk

  • Trade Count: (0)
  • Member
  • *
  • Posts: 89
Jerry Simmons Broadheads - 2 blade
« Reply #29 on: September 16, 2003, 07:48:46 AM »
Simmons 2 blade 190grs. It has a 2" cut goes straight through an animal and will go completely through a shoulder blade. I use these with a 70lb longbow and my 90lb English warbow. Mounted on Hickory shafts.

Once you bend the modular broadhead shaft you have to through the broadhead away. If I hit a rock and bend the two blade head I can straighten it out and resharpen it.

2"W X 2.5" L


John
One Well Placed Shot Is All It Takes