Author Topic: H&R WISH LIST (Read 46918 times)

TopperT · « **Reply #210 on:** December 16, 2008, 11:20:18 PM »

For what its worth......., and since I'm emailing Santa also this AM.....

1). Make the Target Cllassic available again and offer it in .35 Rem.
2). Get a brass trigger guard and forend spacer completed and made available for the TC and BC.
3). For those of us who shoot Black Powder Cartridge......a Target Classic OR a Buff' Classic in 40-65! Kit it up with the brass fix'ins and you got a seller even in this economy.
Merry
Christmas

watsisname · « **Reply #211 on:** December 17, 2008, 03:27:41 AM »

I would like to see all barrels come with the scope rail. Most of us use scopes and open sights just get in the way. As for calibers I would love to see .303 british available. That cartridge would be so sweet in a handi... rimmed case, a nice taper and all the knock down power you would ever need.

rex6666 · « **Reply #212 on:** December 17, 2008, 06:39:32 AM »

Once i ask about a double rifle in say 45/70, of course i was told it would have to sell for thousands, but guess who offers a double rifle in their SPS line?
I would like to have a double in several of the larger cal. we already have.

Hodr · « **Reply #213 on:** January 15, 2009, 09:18:32 PM »

If the quality control were increased, a person coud build a group of survival guns by buying 2 to 4 rifles and have confidence that extra barrels and calibers would interchange in any combination. Having the capability of using any barrel on any frame would improve the redundancy factor for all. Why should a firearm need factory fitting if all parts are supposed to be interchangeable?

captpaul · « **Reply #214 on:** January 16, 2009, 03:51:15 AM »

I purchased a Buffalo Classic because it cost a lot less than those imported replicas, and it was a practical alternative to a muzzle loader in Louisiana. However, I fell in love with this gun and feel that some changes could make this a real treasure to hang on the wall when it is not in the woods. I also found out that this gun really shoots! 2 1/2" groups with the cheap peep sight from a good rest, two deer dead in their tracks for two cartridges since Christmas. Can't wait to handload some lower power loads for target shooting.

A more classic trigger guard. Some curve and flair would be great.

An octagon barrel, or at least the part near the receiver to allow for a better choice of receiver sights that would mount on the flat surface. Would be nice to have a vernier sight on the barrel instead of a modern receiver sight. Presently all I see available for the BC is the Smith ladder sight and it only has a buckhorn sight for use when the sight is folded down. Not exactly what I think I want on this gun and not sure it will change adjustment like a vernier. I like to maintain the classic look and a vernier ladder sight on the barrel would really dress up the BC.

Leave my hammer alone. I like the high hammer since I am shooting receiver sights.

Maybe NEF could make a "Pigeon Grade" BC that could compete with those expensive replicas leaving me with more money for gunpowder and primers. My BC would look much better with just a few improvements.
Capt. Paul

buckslayer · « **Reply #215 on:** January 16, 2009, 11:36:55 AM »

same old same old....i STILL want the 7mm mag and .300 mag that i 99.9% had last year...

c1skout · « **Reply #216 on:** January 16, 2009, 02:17:45 PM »

I'd like some more old military chamberings..... 7.62x54r, 6.5 carcano, 303 brit. etc. Send them out with open sights and od green paint please.

zoner · « **Reply #217 on:** January 16, 2009, 02:53:52 PM »

factory steel triggerguards
6.8 SPC or 257 Roberts
7x57

myarmor · « **Reply #218 on:** March 28, 2009, 01:44:22 PM »

if I may say so myself.. BUMP.

Lets hear some new (even if they echo old) vibes..
Gotta stay fresh as long as possible.
Let 'em know what ya want... how bout realisticly

-Aaron

brennemanj83 · « **Reply #219 on:** March 28, 2009, 03:37:31 PM »

Here's my Wish list

25-20 w/24'' barrel
25-35 WCF w/24'' barrel
32-20 w/ 24'' barrel
32-40 w/ 28'' barre
30-30 w/26'' barrel
40-65 w/ 32'' barrel
45-120 w/34'' barrel
12ga Huntsman Muzzle Loader w/28'' barrel

All with the Buffalo Classic style Frame and Stock Set

cwlongshot · « **Reply #220 on:** March 28, 2009, 04:02:35 PM »

A 25-35, 25-20 and 32-40 in that order. In a BC style rifle if Remington chooses to offer them.

These are tops on my list of handi calibers to have...

CW

EDIT.. OCTAGON barrels for these calibers would be close to heaven on earth...

lee1954 · « **Reply #221 on:** March 28, 2009, 09:00:28 PM »

I would like to call and get a barrle sent to me Or keep My specs for the next time,. just sent the recever in once

-- i'm new at this and don't want to give up my only handi for a untold time to get a new barrle...

I like that shotgun barrle don't cost $200 like TC....I would pay TC prices for say one wildcat barrle.

I'd like 32 H&R mag.(a must) , 257 robert.or .250 Savage,, 40 65, 300/221

I'd like a web page that said there is _____ number of ___ cal barrles with 6 week back in my hot little hands ........

I'd like others costom shops to sell barrle that H&R didn't what to sell

maybe H&R could do a stub program with a shop
I LIKE American Made and good value

zoner · « **Reply #222 on:** March 29, 2009, 03:33:50 AM »

a lot of folks would like to see barrels interchangeable(no fitting required), a good idea but if they do that the price would likely be 300 bucks per barrel. No way they could or would do that without raising prices. While it's true some guns need tweaking to shoot well, it is easily done. These guns go out the door for 300 bucks or less and you get what you pay for....i personally have never used customer service but it sounds like they need to improve on stuff like being more honest about when your gun will be repaired and shipped....like i said before 250 Savage would be nice,bring back the 7.62x39,and i would love a 32 H+R magnum. One more, i'd like to see the pistol cartridges,357,44mag,45 colt, and the 30-30 come to us with a slightly smaller barrel contour...so these guns could weigh in at 5 1/2 to six pounds or so...then they would be real "Handi"

hector615 · « **Reply #223 on:** March 29, 2009, 04:17:54 AM »

Some type of factory adjustable trigger, your choice of twist rates, and the .260 would satisfy me.

dpe.ahoy · « **Reply #224 on:** March 29, 2009, 05:06:41 AM »

All the new Marlin cartridges, 35 rem, 260, PROPER BORE, CHAMBER AND TWISTS FOR THE CARTRIDGE CHAMBERED, 7x57, 7-30 Waters, 257 roberts, 338-06 and more to follow later. DP

mcwoodduck · « **Reply #225 on:** June 02, 2009, 07:52:26 AM »

If they do start to make a 338 in any of the configurations (338 Marlin, 338 Federal, or 338-06) I do not see the others too far behind.
There are a lot of neat calibers that I would like to see as a Handi. These are not in any order of want or caliber they are just as they pop into my pea sized brain.
327mag or at least 32H&R.
any of the above 338's
35 Remington.
303 brit
7.62X54R (Cheap ammo deer killer)
7.62X39 (cheap ammo deer killer)
30-40 Krag ( I know just get a .308)
6.5X55 Sweed. or 260 Rem (a 6.5 X55 Swede will have me plunking down my $ right now.)
9.3X62 or 9.3X74R
405 Win.
454 Casull / 460 S&W
375 JDJ

Bladeforger · « **Reply #226 on:** June 02, 2009, 01:36:29 PM »

32-40!!! And +1 on the octagon barrel.

6.5 Grendel

mitch132 · « **Reply #227 on:** June 02, 2009, 02:08:36 PM »

Mmmmmm.... Octagon Barrels....... My mouth is watering now just at the thought!!!

.375 Hawk · « **Reply #228 on:** June 02, 2009, 02:34:36 PM »

Single Set Trigger, .20 VarTarg, 7mm TCU and .375 cal. barrels without a chamber cut.

.375 Hawk

1911bmw · « **Reply #229 on:** June 02, 2009, 03:45:24 PM »

Some 6.5s like 6.5x55 or maybe .260. Lower hammer for lower rings. Stainless would be cool. Maybe some camo dipped offerings.

wreckhog · « **Reply #230 on:** June 02, 2009, 04:11:18 PM »

32" BC trainer in 22 mag at a Sportster price. Similar trajectory as 45-70.

teamnelson · « **Reply #231 on:** June 02, 2009, 04:45:17 PM »

I'd like a .357 or .44, blued 22" with Iron Sights. Oh wait, they used to make those didn't they.

+1 on a .357 Maximum since that's a real popular DIY rechambering
+1 on a .327 or .32 H&R
+1 on a fancy trigger guard/spacer to go with the BC frame and wood
+1 on octagonal barrels, especially for a BC

20" smoothbore 12ga w/open sights. Thought I'd seen one used, but can't find it on the barrel accessory program.
460sw on a 10ga frame??
Special edition barrel runs for the addicts.

lee1954 · « **Reply #232 on:** June 02, 2009, 05:31:00 PM »

I would like to see a costumer service that could E-mail me and say the barrel you ordered will be in stock,,If we get your reciever sent in now... H&R can get it back in about 4 weeks ....I don't know how things work there but I'd like, H&R costumers or # 1 in our timeframe..
Or a webpage that said there will be 200 - .357 barrels in stock july 15 .. Or CS "press # 7 to hear which barrels are in stock now" ....

I am very very happy with a H&R barrel I got from this form last week.. But if I didn't like it. I wouldn't have to take it to a gunsmith to get the Rifle changed back to the original Cal. I like the basic handi rifle idea ! They have a good assesory barrel line too..

I belive that more costom barrels would bring in more handi buyers. more costumeized friendly

I'd like H&R to sell under lugs to other barrel makers

I'd like 300 wisper, 32 H&R or 32-20 --- 6.5 mm.and a .40 cal...... The like in short runs even if it cost more ..bring back some old rim cases like the 25-35 and please H&R don't be afraid of use handloaders - It's our hobby -- and I think I'm the only one that is a real nut case!!!

The 7. 62 X 39 barrel was dropped 'cuse of problems - but none or for sale, so those who have them must be happy ,,, . Thought a 30 -30 is about the same .

blind ear · « **Reply #233 on:** June 02, 2009, 07:24:01 PM »

32 H&R - 327 mag

blackpowderbill · « **Reply #234 on:** June 03, 2009, 12:49:30 AM »

Here's one for all who would like to be able to easily rechamber their rifles. A factory barrel stub that is internally threaded. Also available from the factory would be prethreaded, unchambered barrels that use the same method as Savage for setting headspace (barrel nut). This could also be applied to chambered barrels so that rather than having to fit every new barrel to each reciever, a new or different barrel could be hand screwed into the stub, a headspace gauge inserted and the barrel closed. The barrel could be snugged up on the gauge, then the nut could be torqued down and off to the range you go.
Other than that, how about the option of a nicer stock that actually fits the reciver.

kevinsmith5 · « **Reply #235 on:** June 03, 2009, 04:03:12 PM »

BC with steel or pewter trigger guard, straight stock with flat steel butt plate, Pewter end cap on fore grip. Octagonal barrel would be heaven.

maglvr44 · « **Reply #236 on:** June 03, 2009, 04:24:52 PM »

Well, seeing dreams are free.....
70-150 Winchester caliber in 32" and a 16" trapper length, that eject the empties!

wreckhog · « **Reply #237 on:** June 03, 2009, 05:03:31 PM »

Drill and tap all shotgun barrels for a scope base. Yes, especially the smoothbores. How much could it add to the cost?

gstewart44 · « **Reply #238 on:** June 03, 2009, 05:20:03 PM »

303 British barrel....

troy5775 · « **Reply #239 on:** June 03, 2009, 05:41:50 PM »

45 acp
40 s&w
9mm
7.62x54
and bring back the offset bore 22lr