Author Topic: H&R WISH LIST (Read 46910 times)

teamnelson · « **Reply #240 on:** June 03, 2009, 07:39:14 PM »

... a 9mm sportster 20" on an SB1 with synthetic stock/forend.

XxLT250RxX · « **Reply #241 on:** June 07, 2009, 04:30:22 PM »

Well...........I just wish they would send me my rifle back with the three barrels I ordered back at the beginning of September 08.

I know that was not very constructive. Sorry.

jlwilliams · « **Reply #242 on:** June 08, 2009, 01:44:24 AM »

A quick detatch forarm. Something with a latch like a good shotgun instead of the screw.

35RMB · « **Reply #243 on:** August 20, 2009, 04:19:45 AM »

O.K. I guess I'll put my .02 Cents.

I wish they would offer barrel on the the following chamberings:

.250 Savage
.257 Roberts
.300 Savage
.338 Marlin Express
.35 Remington
.405 Winchester

How about it ?

Blackhawker · « **Reply #244 on:** August 20, 2009, 04:26:25 AM »

Since I've already posted it on a different poll, I guess I'll post my "wish list" here.

32-20
38-55 (bring it back again but done right)
405 Winchester
357 Max
30 carbine

for cowboy shooters:
38-40
44-40

bljc27 · « **Reply #245 on:** August 20, 2009, 05:18:32 AM »

Mine would have to be the .300 win mag that they decided not to make!

briannmilewis · « **Reply #246 on:** August 26, 2009, 02:46:31 PM »

Seems to me that just about every caliber wish could be filled by unchambered barrels. Then work up as many calibers in unchambered barrels as they may see fit. Or better still, sell some unbored barrels too, so they could be custom bored and chambered. Seems obvious to me. I know, I know, obvious does not cut it when it comes to rifle manufacturing.

OK, the lightbulb went on! If you don't chamber the barrel or bore it, they could not fit it up at the factory because they don't know the cartridge and could not headspace for anything, correct?

watkibe · « **Reply #247 on:** August 26, 2009, 08:08:26 PM »

250 Savage
35 Remington
375 Winchester

wganz · « **Reply #248 on:** August 26, 2009, 08:13:57 PM »

6.8 SPC
6.5 Grendel
.257 Roberts
.250 Savage
.225 Winchester
6.5 Swede
.35 Remington

Belt Fed .50 Cal. · « **Reply #249 on:** September 13, 2009, 04:59:45 PM »

I would like to see whatever caliber they make done in the ORIGINAL CHAMBER AND BORE DIMENSIONS AND THE ORIGINAL TWIST RATE FOR THE CARTRIDGE! (there is no excuse for the mess they made of the .38-55 Target Model) My caliber wish list: .38-55 done right
220 Swift
250 Savage
300 Savage
.32-40 Win.
6.5X55 Swede
460 S&W
.45-120 WIN.

watkibe · « **Reply #250 on:** September 13, 2009, 05:18:10 PM »

How about a Handi Pistol ? Ten or fourteen inch barrels in 204 Rem, 22 Hornet, 223 Rem, 357, 44, maybe even 243...

ncpreacherboy1 · « **Reply #251 on:** September 13, 2009, 06:53:33 PM »

.243, .270, 7mm-08 and 30-06 in 26 and 28" barrels.
405 win
260
6.5x55
460 s&w
more stainless offerings
220 swift
257 bob
7-30 waters
I would probably not be able to buy all of this at one time........but it is a wish list.

mtmarfield · « **Reply #252 on:** October 30, 2009, 03:47:47 PM »

Greetings!

Is it just me, or would that H & R CR Carbine be more appealing in a traditional rifle cartridge, such as the .38 WCF, or the .44 WCF? I'm sure that the current popularity of the .45 Colt in long guns is justified; but it just seems like one of the Winchester cartridges would be "just right" for the CAS Folks. Even in this economy, I'd JUMP on a .44 WCF chambered Carbine.
What do you folks think?

Be Well!

M.T.Marfield

billy_56081 · « **Reply #253 on:** October 30, 2009, 04:02:57 PM »

I for some reason love that cartridge and would buy and aftermarket barrel.

Lefty Dude · « **Reply #254 on:** October 30, 2009, 05:03:12 PM »

Very close to a 44 mag, I shoot 44-40 in my CAS/SASS lever rifles.
Wishful thinking, I doubt they would. Marlin won't bring out a 94 lever in 44-40. Not enough sales Is my guess.

I would be just as happy with a CR carbine in 44.

I have a Handi-44, I might just by a CR stock set.

puma4440 · « **Reply #255 on:** October 30, 2009, 06:09:52 PM »

I wish...hence my screen name.

Elkoholic · « **Reply #256 on:** October 31, 2009, 03:31:09 PM »

Here's my top ten... most of these have been mentioned - several times. So, get a clue Remington/NEF decision makers...
If you build it...they will come (and buy!) We could only hope...

218 Bee
250 Savage
257 Roberts
260 Remington
6.5x55
7x57 again
338 Federal
338-06
358 Winchester
375 Winchester

How about - charge $50 more per barrel and have them actually fit the frame without modifications.
Just a thought!

Mike

mcwoodduck · « **Reply #257 on:** October 31, 2009, 06:49:01 PM »

I want to ammend my list.
Extend the Buffalo Classic model.
Add.
22LR, 22 Hornet, 30-30, 357 mag
Add 405 Win, 338 Marlin.
Extend the Carbine. Line. i think it would make a great little carbine for all kinds of uses.
22LR, 22Hornet, 223, 30-30, 35 Rem, 357 mag / max, 44 mag, 45-70.

Another idea is to have barrels that are not chambered.
So a 44 barrel can be chambered to 44-40, 44Spl, 44 russian if you want.
224 barrel can be chambered to 218, 225, 223 WSSM or other centerfire.

bcp · « **Reply #258 on:** October 31, 2009, 07:27:22 PM »

Make 17 rimfire rifles with sporter-weight barrels in addition to the heavy barrels.

rio grande · « **Reply #259 on:** November 11, 2009, 07:39:05 PM »

Quote from: zoner on March 29, 2009, 03:33:50 AM

a lot of folks would like to see barrels interchangeable(no fitting required), a good idea but if they do that the price would likely be 300 bucks per barrel. No way they could or would do that without raising prices. ....................,bring back the 7.62x39,and i would love a 32 H+R magnum. One more, i'd like to see the pistol cartridges,357,44mag,45 colt, and the 30-30 come to us with a slightly smaller barrel contour...so these guns could weigh in at 5 1/2 to six pounds or so...then they would be real "Handi"

Interchangeable barrels could be done for very little extra $. They are already making the barrels, all they would have to do is tighten the tolerances - no extra cost in materials, perhaps a little bit more time (or not, depending on their process and learning curve). Besides, this is America, we can do it! and American workers are second to none!
I work in a machine 'job' shop, and we hold close tolerances every day.
I agree with your recommendations, lighter is good, .32 mag also (maybe .327 federal)!

bullet8542 · « **Reply #260 on:** November 24, 2009, 03:28:56 PM »

My Wish List is simple.

Any Weatherby caliber would be nice, Not the monsters but the .257 Weatherby, .270 Weatherby, .338-06 Weatherby, Anything Ackley, Some sort of Magnum round, Maybe the .338 Marlin Round would be great.

Maybe Barrel Blanks for Smiths to do wildcats.

26-t · « **Reply #261 on:** November 24, 2009, 03:50:02 PM »

6.5x55 for me. 26-t

bunkysdad · « **Reply #262 on:** May 28, 2010, 02:37:38 PM »

I am glad to see that the bull barrel Handi Rifle is available in .204 Ruger. I would like to have one of them. I was thinking about a couple of things I'd like to see that are not available so I thought I would start a wish list topic. I am sure that most of us have at least a few items for the list.
I'd like to see:
*Handi Rifle in 7.62x54R (hopefully would do well with surplus ammo)
*45/70 octagon barrel Handi or Buffalo classic Octagon (Has H&R ever made a octagon barrel gun?)
*Vent rib barrel 12 ga with the case hardened receiver.

Anyone want to list a few of your wishes?

bunkysdad · « **Reply #263 on:** May 28, 2010, 02:44:09 PM »

I was just thinking, based on the great feedback from you guys that shoot 30-30, that the 30-30 round would be a nice alternative to 7.62x54r perhaps, I just like rimmed cartridges. Besides I like to reload and in a single shot the possibilities are exciting.

Peshtigo71 · « **Reply #264 on:** May 28, 2010, 06:52:36 PM »

There's strength in numbers you guys. If we let H&R know we're interested maybe they'll be more inclined
to give the customer what they want. What hasn't been covered/and I'm in agreement so I'll just input my
favorites. How about something a little lighter for the youth, especially the girls that like to shoot?
1. 38-55 done properly
2. .257 Roberts
3. .260 Remington
4. 7X57
5. 8X57
6. 351 & 401 Winchester SLR-just for fun.
7. .405 Win
8. .444 Marlin

spikehorn · « **Reply #265 on:** May 29, 2010, 06:31:07 AM »

26" 308 barrel

bobg · « **Reply #266 on:** May 30, 2010, 03:40:28 AM »

250 Savage. I would buy one in a heart beat. Should never have sold the Ruger International i had.

USSColorado · « **Reply #267 on:** June 13, 2010, 04:18:10 AM »

I want open sights. Was looking forward to a .357 barrel, but they don't have sights. And why not a .22lr with the bore just a fraction of an inch off center, so the firing pin hits the rim?

myarmor · « **Reply #268 on:** June 13, 2010, 05:06:21 AM »

They made them for a while, 22lr with offset bores for the Versa pack. They should bring them back, there is a high demand for them around here.

bikerbeans · « **Reply #269 on:** June 13, 2010, 05:14:21 AM »

How about if they just offer the current calibers with barrels that don't drift of POI after getting a little warm. Should be able to shoot more than one or two shots in a row without wondering where the next bullet will hit.