Author Topic: H&R WISH LIST (Read 46913 times)

briannmilewis · « **Reply #270 on:** June 13, 2010, 07:57:30 AM »

Quote from: bikerbeans on June 13, 2010, 05:14:21 AM

How about if they just offer the current calibers with barrels that don't drift of POI after getting a little warm. Should be able to shoot more than one or two shots in a row without wondering where the next bullet will hit.

We need a barrel that is halfway between the thickness of a bull and a regular, so we could carry all day without building those biceps, and still hold POA for 3-4 rounds in quick succession.

spikehorn · « **Reply #271 on:** June 13, 2010, 08:45:14 AM »

Quote from: briannmilewis on June 13, 2010, 07:57:30 AM

Quote from: bikerbeans on June 13, 2010, 05:14:21 AM
How about if they just offer the current calibers with barrels that don't drift of POI after getting a little warm. Should be able to shoot more than one or two shots in a row without wondering where the next bullet will hit.

We need a barrel that is halfway between the thickness of a bull and a regular, so we could carry all day without building those biceps, and still hold POA for 3-4 rounds in quick succession.

For some reason this gave me the idea to weigh My 308 ultra varmint and my 30-30 Both guns have pallet wood Monte Carlo stocks with Schnabel fore arms. The 30-30 has a regular contour barrel wears a Simmons 44mag 3X10X50 scope with weaver high quad lock rings and a hammer spur. It weighed 7.6 lbs
The 308 has a bull barrel wears a Nikon Pro Staff 3X9X40 with weaver high quad lock rings and a hammer spur. it weighed 8 lbs even. 4 tenths of a pound isn't that much of a difference. A barrel between the two would only save you .2 lbs feasibly.

RWK · « **Reply #272 on:** June 13, 2010, 09:22:09 AM »

8 twist 22-250-- 6mm in a 8 or 9 twist and 26" barrel

myarmor · « **Reply #273 on:** June 13, 2010, 10:51:16 AM »

I have no qwallms about the current barrel weight of there barrels. Personally I like the thickness of them. especially in the 26" ones Though It would be nice to see slimer contours on a couple offerings like the old 30-30 barrels had. Especially in the pistol cals...

polaris30144 · « **Reply #274 on:** August 02, 2010, 08:17:10 PM »

I have a factory H&R Ultra chambered in 7x57, shoots where I point it and puts the smack down on deer and bear.

Curt Dawson · « **Reply #275 on:** December 10, 2010, 05:04:25 AM »

A sporter weight 22" barrel in 250 Savage would be nice for Christmas. Or any other time.

1NEFsofar · « **Reply #276 on:** December 10, 2010, 06:26:08 AM »

How about a oldy but a goody....7.62x54R.

knight0334 · « **Reply #277 on:** December 10, 2010, 07:53:41 AM »

More rimmed cartridge selection. I can never find any rimmed guns in the shops. All I can find are 223, 22-250, 243, 308, 270, and 30-06 crap. ...keep those cartridge for the guns that they were designed for -repeaters.

I'd love a .327Mag Handi. Also to be able to find a .357mag/max and a 44mag gun in a gun shop.

gatersb · « **Reply #278 on:** December 10, 2010, 02:55:46 PM »

cant really make my mind up on the calibers for the list but my wish would be for them to start making the accessory barrels again.

bcp · « **Reply #279 on:** December 10, 2010, 04:05:45 PM »

H&R custom shop. Send them an action and a reamer for any of their bore sizes. They chamber a barrel and send the action, reamer, and fitted barrel back to you.

Bruce

cjrjck · « **Reply #280 on:** December 10, 2010, 05:39:03 PM »

7-30 Waters for the older receivers.

Tommie D · « **Reply #281 on:** December 10, 2010, 06:00:10 PM »

.17 Bumble Bee & .19 Calhoon

quickdtoo · « **Reply #282 on:** December 10, 2010, 07:24:48 PM »

H&R will never offer chamberings that are handload only, so you can forget wildcats, you can always dream, but those are wishes that will never happen. $:-\$

Tim

Tommie D · « **Reply #283 on:** December 10, 2010, 08:37:45 PM »

Well, like my dad always told me: Wish in one hand and .... in the other, and see which one fills up first

Lon371 · « **Reply #284 on:** December 10, 2010, 10:45:24 PM »

My wish list is simple.

I wish a few members here would call me to come and empty their gun rooms so they can start over

Lonny

rdlange · « **Reply #285 on:** December 11, 2010, 04:50:17 AM »

A lower profile hammer.

A lighter barrel option. Maybe fluted barrels in the same contour would do this and keep the stiffness and reduce POI change.

Adjustable trigger, or lighter.

Also a left handed thumbhole from someone.

Custom shop... so I could get one just my way.

ssjohnnie · « **Reply #286 on:** January 15, 2011, 07:49:43 AM »

I wish H&R would offer a 22lr with your choise of lam. stock with a match grade bull barrel with match chamber and a high polish blue job i like these guns just wish they kick it up a bit wouldn't mine paying more either......just my two cents

RWK · « **Reply #287 on:** January 15, 2011, 08:36:46 AM »

Make there action a lot stronger, then the other cal. will come.

cwlongshot · « **Reply #288 on:** January 15, 2011, 09:37:37 AM »

I LOVE the idea of a custom shop!!!!! That way ALL of us could get our "Wishes"...

CW

quickdtoo · « **Reply #289 on:** January 15, 2011, 09:43:24 AM »

FWIW, the H&R Marketing and Brand manager that worked as a liaison between myself(us) and H&R/Marlin and later Remington for over 3yrs tried to push the custom shop idea into reality, but the powers to be wouldn't go for it, same for many other great improvements in their product line that have been shared here.

Tim

cwlongshot · « **Reply #290 on:** January 15, 2011, 10:07:04 AM »

Tim,
I appreciate that, but I also know all things change. We all know, for companies to stay in business and remain profitable in their product lines. They need to make a product that customers will buy. The better they are at this the more profitable they will become.
With companies like Rossi and now CVA jumping into the "cheap" Single shot market. They NEED to be competitive, resting on their laurels, will leave them at the nursing hind teat.

IF they listen, and enough of us call for something we want, it will become a reality.

The 327 Mag would be a natural, (My own "want" is a 32-40) but I fear the lack of a .32 cal barrel in their line severely restricts that from happening.

CW

quickdtoo · « **Reply #291 on:** January 15, 2011, 10:28:45 AM »

We can always hope, but the masses are what they listen to, we're a very small entity in that reference. So far they've responded to just two markets, the MS and LA primitive deer hunters and the Indiana pistol chambered rifle deer hunters, all you have to do is browse the 2011 H&R catalog and see what isn't there any more, not exactly inspiring. $:-\$

Tim

cwlongshot · « **Reply #292 on:** January 15, 2011, 10:38:01 AM »

Quote from: quickdtoo on January 15, 2011, 10:28:45 AM

We can always hope, but the masses are what they listen to, we're a very small entity in that reference. So far they've responded to just two markets, the MS and LA primitive deer hunters and the Indiana pistol chambered rifle deer hunters, all you have to do is browse the 2011 H&R catalog and see what isn't there any more, not exactly inspiring. $:-\$

Tim

I'm happy for the primitive hunting boys and caliber chamberings.

I KNOW you like to see the 35 Rem addition!!!

As for whats been dropped, yea, I noticed....

CW

lee1954 · « **Reply #293 on:** January 15, 2011, 08:47:14 PM »

6.5 Creedmoor,,, the 300BLK plus 32 H&R or 32 20

Illhunter · « **Reply #294 on:** January 16, 2011, 07:45:19 AM »

guess the biggest want for me would be barrels that don't have to be fit just put on and lock up.

Big Blue · « **Reply #295 on:** January 16, 2011, 07:58:15 AM »

Quote from: Illhunter on January 16, 2011, 07:45:19 AM

guess the biggest want for me would be barrels that don't have to be fit just put on and lock up.

I'd second that and add a 1911 Commander style low profile hammer, more S.S. offerings, a .375 Win. chambering and that they make an effort to increase production in order to keep up with the demand for the accessory barrel program.
Don

mo.hillbilly · « **Reply #296 on:** January 18, 2011, 06:40:32 AM »

steel,brass,or stainless triggerguards and forend spacers especialy on bcs. custom shop sounds good. Big bore black powder crtgs are always in demand.

kf4ocv · « **Reply #297 on:** January 18, 2011, 07:13:05 AM »

I will echo the comment on doublesand add over under and side by side in every guage with screw in chokes. And bring back the 16g.

tmccray45 · « **Reply #298 on:** January 18, 2011, 07:18:46 AM »

On my list:

   6.5x55 (Except that I wouldn't find out about it being available until 4 minutes after the announcement. By then, I'd be too late and H&R would be sold out. So, even if they would offer the 6.5x55, I'm still not going to get one. . . Man, life ain't fair.)

   In the alternative, 260 Remington.

   7.62x54R

   7.62x39 - I have one that, when I'm feeling down-n-out, I take that to the range. Because it's scary accurate, it makes the sun come out and the birds begin to sing.

OldSchoolRanger · « **Reply #299 on:** January 19, 2011, 09:12:57 AM »

True barrel interchangeability like T/C.
It would definitely make it easier for people to buy additional barrels.
If they had that I guess I would own more barrels, and probably also more Handi's than I do now!

On barrel calibers, I would definitely like a barrel in 7x57Mauser, and 6.8mm SPC.