Author Topic: H&R WISH LIST (Read 46969 times)

gomerdog · « **Reply #180 on:** March 27, 2008, 05:05:02 PM »

What LaOtto222 said about a few new cartridges.

LONGTOM · « **Reply #181 on:** March 27, 2008, 05:44:25 PM »

Personally I would love to see them make an action strong enough to take the 270 WSM in either a 26" or 28" barrel.

IT WOULD SELL!!!!!!!!!!!

LONGTOM

dpe.ahoy · « **Reply #182 on:** March 30, 2008, 08:30:11 AM »

First off, I second the handgun option. Then fit the barrels so they don't have to be sitted at the factory. Waited 3 months one time to get mine back. Chamber for 327 Fed., 25-35, 257 Bob, 7-30 Waters, 7x57, 6.5x55, 260 Rem., 338 Fed., 35 Rem., 358 JDJ,( I know, can't happen) 460 S&W. More to follow. But most of all, make them all work right! No reason to make chambers, bore dimentions and twists that don't work! Now, about the wood butt stocks. If they had the same shape as the plastic ones, that would be an improvement. Now back to 35 Rem., 7-30 Waters, 6.5x55, ect. DP.

Cat Whisperer · « **Reply #183 on:** March 30, 2008, 10:34:14 AM »

A match-grade shootin' iron in a PISTOL caliber - for competition (ASSRA) using cast bullets at 100 and 200 yards. .327 Ruger / .357 Mag / 41 MAG! / 44 Mag / 45 Colt to name a few.

A switchable ejector/extractor - operator's choice.

A match-grade trigger.

striker525 · « **Reply #184 on:** May 08, 2008, 05:11:30 AM »

I like the 30-30 Long barrel Idea along with the Custom Shop, would also like to see better fit and finish along with steel and or brass hardware.

Curt Dawson · « **Reply #185 on:** May 08, 2008, 07:37:28 AM »

Something in 6.5

ccoorreeyy · « **Reply #186 on:** July 04, 2008, 11:10:06 AM »

I'll through out my crazy idea for the wish list. I would love to have 20ga slug gun with a stainless, 19" med. heavy fluted barrel with porting. Would also take some nice iron sights on it too. A case hardened rec. with a cross bolt saftey and a lower hammer from the factory would also be nice. The stock would be green/black laminated stock that was shapped and checkered with a limbsaver on the butt.

PHATINJUN · « **Reply #187 on:** July 05, 2008, 07:59:38 AM »

Those are all great idea's ...but 95% of them will drive the $$$$ up and there is already companies out there Thompson Center Encores and Contenders with all that you desire .The reason I went to H&R and NEF's $$$$ and the fact that you can work them yourself with out the fear of costing a ton. I'd like to see it stay that way. Kurt

cwlongshot · « **Reply #188 on:** August 07, 2008, 12:58:33 PM »

More than a two year old thread and most of us still want the same things!!

I like the old timers, 25-35, 25-20. 32-40, 32-20, 35 Win (Only cause shes rimmed

) These available in an octagon barrel would be heaven!!!

As for stocks, bring back Blk/Gray laminates, add more thumb holes and how about some nice WALNUT!!!

Troyboy · « **Reply #189 on:** August 07, 2008, 01:36:40 PM »

I am happy with NEF I do not want to see the prices go up . That being said they could offer upgrades from their shop,like a metal triggergaurd or a brass one. Just call and place the order. More calibers would be good. More variety from the shop.

rex6666 · « **Reply #190 on:** August 08, 2008, 03:48:33 AM »

I would like to see, longer octagon barrels, myself i would like 45/70. and some brass fittings.
these could be optional.
put out a special run off these and see how quick they go.

do we have any idea if anyone ever looks at this list, that can instagate any of the wishes?

jlwilliams · « **Reply #191 on:** November 14, 2008, 03:29:16 AM »

I'd like to see more pistol calibers. For recreation, competition and even small game, you can do alot of shooting for little money with pistol calibers. The auto pistols calibers are completely missing from the line. Those of us who shoot .357 or .44 are good to go for two guns one box of ammo, but how about the 9mm, .40 and .45acp? Heck, 45acp out of a rifle and you don't really need ear plugs if your outside.

Spanky · « **Reply #192 on:** November 14, 2008, 04:07:18 AM »

.35 Remington

This is a no brainer for 'em.
They already have the barrel on the .357 mag.
Ream out the chamber to .35 Rem. and sell 'em by the truckload!!

So many people have asked for this.
I hope Big Green is paying attention.

Spanky

PigBoy Crabshaw · « **Reply #193 on:** November 14, 2008, 04:14:33 AM »

I'd buy one in a hot second! -g

Kal52 · « **Reply #194 on:** November 14, 2008, 07:08:51 AM »

Id like to see a heavy barrelled smooth bore 12ga, It sure would ease the recoil on the pred/turkey loads.

Also I would like the .22 hornet to come back, I didnt get one in time

I am also thinking now that remington has the wheel, we may see the .17 fireball and maybe the 221 come into play. It would be nice to have one in a .327 mag, if you could find ammo for it, for a new wiz bang round, sure hasnt gotten much attention lately.

Dave

dpe.ahoy · « **Reply #195 on:** November 14, 2008, 07:16:43 AM »

Because it was rumored and then dropped, I will say again with others, 35 Rem. They have the barrels and they have the chamber reamers, just do it! DP

notnodak · « **Reply #196 on:** November 14, 2008, 09:56:09 AM »

All I want is a tighter fit so I do not need to send reciever in to be fitted to new barrels. Like CVA Optima Elite

jacksrbtr46 · « **Reply #197 on:** November 14, 2008, 04:09:36 PM »

Rem 260 SS 26" bull barrel, metal trigger guards, metal forend spacers, interchanceable barrels that don't have to be fitted at the factory. Customer choice of stocks and stock material/color Cinn or Camo, or grey and whether it's laminate straight, or laminate thumbhole, etc. Maybe they could offer a "kit" rifle, customer chooses what he wants, caliber, barrel length and type, stock, level of fit & finish etc. Nicer break open lever. Speaking for my hunting partner who doesn't own a computer. A left handed laminated thumbhole stock.

Thanks
Jack

ironglow · « **Reply #198 on:** November 19, 2008, 01:52:50 PM »

Better fitting..so i can just order a barrel opr pick one up from available stock at the gun shop, in the same way one can buy a slug barrel for their model 870 shotgun....

Josh M. · « **Reply #199 on:** November 19, 2008, 03:17:11 PM »

OK, here's my two cents....

They are doing a good job now, but there is always room for improvment.
Here is my wish list in order of importance.

1 - Improve customer service in the barrel accessory dept. (more man power, faster turns, fewer quality issues)

2 - If I could order two new calibers they would be .32 Mag and .338 Fed.

3 - Offer all actions and barrels in blued and stainless.

4 - There is a lot of room for improvment in the stock dept.

Please and thanks - JM.

embalmer883 · « **Reply #200 on:** November 19, 2008, 05:39:42 PM »

Just to up the antie............... 35rem. Especially since it would be legal in MS for primative weapon, they would sell a ton of em.

slayer · « **Reply #201 on:** November 20, 2008, 01:42:23 PM »

.44 Mag wood stock, open sights, back on the SB2 frame(so we can have rifle caliber barrels put on it).
Bring back the Sidekick and Huntsman(what were they thinking)!!

Westbound · « **Reply #202 on:** December 16, 2008, 12:27:56 PM »

I would like to see a 7x57. I'll be starting with the 7mm-08. after playing with that for a bit, i'll ream to 7x57AI. I've been told that's as close as I can get to 7x57.
That thumbhole stock looks really nice... except that i shoot LEFT-handed

cwlongshot · « **Reply #203 on:** December 16, 2008, 02:50:52 PM »

Quote from: Westbound on December 16, 2008, 12:27:56 PM

I would like to see a 7x57. I'll be starting with the 7mm-08. after playing with that for a bit, i'll ream to 7x57AI. I've been told that's as close as I can get to 7x57.
That thumbhole stock looks really nice... except that i shoot LEFT-handed

What about the 7X30 waters? That would be a great caliber for the handi!!!

CW

dpe.ahoy · « **Reply #204 on:** December 16, 2008, 03:51:05 PM »

CW, I'll let you know when I get my package from Wayne.

DP

dpe.ahoy · « **Reply #205 on:** December 16, 2008, 03:54:28 PM »

Hey Tim, can this whole thing be sent to Remington, Marlin and H&R Divisions? If they all see this thread, MAYBE some of my Santa's list would come true.

DP

mike@nds · « **Reply #206 on:** December 16, 2008, 04:20:04 PM »

A factory peep sight that's simple, durable, and ALL STEEL. With real click adjustments.

New factory calibers:

.357 Maximum
6.5x55 Swede
6.8 SPC

Doublebass73 · « **Reply #207 on:** December 16, 2008, 05:01:26 PM »

30-30 or .357 Magnum Superlight barrels for lightweight hunting carry.

quickdtoo · « **Reply #208 on:** December 16, 2008, 05:27:16 PM »

Quote from: dpe.ahoy on December 16, 2008, 03:54:28 PM

Hey Tim, can this whole thing be sent to Remington, Marlin and H&R Divisions? If they all see this thread, MAYBE some of my Santa's list would come true. DP

Someone has been reading it for quite a while, although it hasn't been the same people all the time.

Tim

http://www.gboreloaded.com/forums/index.php/topic,64281.msg389265.html#msg389265

dpe.ahoy · « **Reply #209 on:** December 16, 2008, 06:03:25 PM »

And it looks like some things have been heeded. Hopefully the ball won't get dropped. (35 Rem)

DP