Author Topic: H&R WISH LIST (Read 46470 times)

hex · « **Reply #390 on:** May 11, 2012, 10:25:57 AM »

My wish would be to find an H&R 330 Rifle...

Mr.Crowley · « **Reply #391 on:** December 10, 2012, 07:43:08 PM »

H&R handi rifles I would like to see made available from the factory, add yours too if you like!

Classic Carbine in -
.44-40
.38-40
.44 Special

Handi-rifle with wood stocks and Iron sights in -

.357 maximum
.460 S&W Mag
.264 win mag
.375 winchester
.405 winchester
.22 K Hornet
.17 Hornet

Doc Fillem · « **Reply #392 on:** December 10, 2012, 07:55:00 PM »

Classic Carbine in: .357 Max or Magnum and 30-30
Re-issue the Target Classic in 38-55

Darryle · « **Reply #393 on:** December 10, 2012, 08:40:53 PM »

6.8 x 43mm

Delivered by a sleigh and 8 tiny reindeer

geezerbiker · « **Reply #394 on:** December 10, 2012, 11:05:08 PM »

A .257 Roberts or a .250 Savage.

It seems to me that they could release a couple hundred special edition rifles in less popular but still in demand calibers that use bore sizes they already have for only a pittance over the cost of the standard chamberings. If they did this once a year, I think they would all be sold before they hit the dealer's shelves.

Tony

brayh92 · « **Reply #395 on:** December 10, 2012, 11:54:12 PM »

.300 win mag
7mag
Wish they would re issue the .38-55 as mentioned also

catncarp · « **Reply #396 on:** December 10, 2012, 11:56:59 PM »

mo_bio · « **Reply #397 on:** December 11, 2012, 01:46:57 AM »

All of the above and at least one 6.5.

spooked · « **Reply #398 on:** December 11, 2012, 02:28:25 AM »

25-20 with 1n10 twist, 300 savage

fullup3 · « **Reply #399 on:** December 11, 2012, 02:33:31 AM »

7.62 x 39 and 7.62 x 54.....I know they used to make the x39, and I want one!

wganz · « **Reply #400 on:** December 11, 2012, 03:24:12 AM »

The belted magnums are a no go pressure wise.

Given that the parent company, Remington, is pimping the .300 BLK and has had the 6.8 SPC out for several years; you would think that having a .308 or a .277 bore, it wouldn't be too hard to send Bubba around the other side of the building to borrow some chambering reamers. Might take him most of the day to walk there and back but they'd have the reamers to go with the barrels they already stock......................................................

But, again, we're talking about dealing with modern American management that cannot see past this quarter's results.

The .260 Remington should also be easily doable. Give Bubba a cart to push this time since barrels are heavy and have him bring back some .264 barrel blanks and a .260 Remington chambering reamer. Voila! We'd have the .260 also.

ibgp3 · « **Reply #401 on:** December 11, 2012, 04:11:22 AM »

6.5 Creedmoor
...which is 6.5 x 250 Savage "Hornady Improved"

It's hard to figure how it would be better than a 260 Remington in a Handi,
...but it really works.

Jim Flinchbaugh · « **Reply #402 on:** December 11, 2012, 05:05:37 AM »

Quote from: Doc Fillem on December 10, 2012, 07:55:00 PM

Re-issue the Target Classic in 38-55

oh, yes please!!!!!!!!!!!!!!!!!!

ousooners1baby · « **Reply #403 on:** December 11, 2012, 05:43:07 AM »

Did they ever put out any of the WSM?

gcrank1 · « **Reply #404 on:** December 11, 2012, 05:45:03 AM »

The TM should be available in 32-40 as well as 38-55 (but hey, they dropped the 38-55 'cause not enough were being sold, so......).
The 357 Max should be a no brainer.
The 6.5 x 55 about the same.
Rescind that silly barrel availability/fitting 'rule'; if they have 'em for new rifles they should be available for fitting.
I would like to refer management to the concept of,'respond to your customer base'......duh; it has long been known in marketing that it is easier/cheaper to keep a customer than develop a new one.

fish280 · « **Reply #405 on:** December 11, 2012, 05:45:05 AM »

7.62x54R in .311, with sights.

45-70.gov · « **Reply #406 on:** December 11, 2012, 06:00:28 AM »

scope ready on a 30-30...... real stainless not nickl plated

just a scope ready in EVERY thing that they already make with the wrong stock and cheap sights

375 winchester would probly be a great cast load
405 winchester......the only 2 that see aren't already done by some similar cartridge

like to see handi interchange as well as TC

nanuk-O-dah-Nort · « **Reply #407 on:** December 11, 2012, 06:01:42 AM »

a special run of barrels NOT CHAMBERED, in every bore size they carry.

6.5 Creedmoor or 6.5x308

11.2x60 Mauser 1/16 twist

45-70.gov · « **Reply #408 on:** December 11, 2012, 06:07:50 AM »

Quote from: nanuk-O-dah-Nort on December 11, 2012, 06:01:42 AM

a special run of barrels NOT CHAMBERED, in every bore size they carry.

6.5 Creedmoor or 6.5x308

11.2x60 Mauser 1/16 twist

even a caliber like 30 carbine
25 ACP........

but you do have a great idea

like to see every pistol round as a companion gun for what ever you carry.....scoped

OSOK · « **Reply #409 on:** December 11, 2012, 06:36:54 AM »

Bring back the .38-55 TC.
Add a .30-30 HC (Hunter Classic) with a 26" barrel.
a 6.5 something....260, 6.5 Creedmore, 6.8 SPCII, 6.5x55.
Add more barrels to the ultralight family. Some of us would like a small, light rifle in a heavier caliber.
I see no reason not to add the old military calibers...7x57, 6.5x55, 7.62x54. I'd but the first two right away.
They are already doing the .500 S&W, add the .460. And bring back the .357 Max as a factory option.
Create a "Handi-Holics Custom Shop". If I want a 16.5" lightweight .30-30 with BC wood, all I should have to do is fill out the form, attach my check and FFL info and wait for "Bubba" to push his cart across the building to knock it out.
Bring back iron sights as an option on ALL barrels.
Lower the damn hammer to make scope mounting easier. The current hammer is fine for a shotgun, but a PITA on the rifle.

RustyReel · « **Reply #410 on:** December 11, 2012, 09:10:29 AM »

Quote from: gcrank1 on December 11, 2012, 05:45:03 AM

.............. as well as 38-55 (but hey, they dropped the 38-55 'cause not enough were being sold, so......).

Didn't they sell every one they made??? Sounds like they sold pretty well??

Second the 375 Winchester. as well as a bunch of others listed here.

How about the 225 Winchester
Maybe a couple of "wildcats" the 25 Krag and the 35 Krag.

scotsman · « **Reply #411 on:** December 11, 2012, 09:22:56 AM »

iron sights available on all barrels. I would buy a 22 magnum barrel today if I could get it with sights.

wtroger · « **Reply #412 on:** December 11, 2012, 10:29:36 AM »

A 6.8 Rem spc would be an excellent round for the handi. Grand daughter used one in a Savage I rebarreled to take her first deer low to no recoil and the new 120 gr Hornady sst round is deer killing machine. A youth/ ladies model would be excellent.

hoytcanon · « **Reply #413 on:** December 11, 2012, 11:57:49 AM »

.17 Hornet Choate stock set, and 6.5X55 Swede Mannlicher and a 7X57 Mannlicher... would actually like to see a Mannlicher walnut stock set available for all calibers.

cnymuzguy · « **Reply #414 on:** December 11, 2012, 12:05:53 PM »

7x30 Waters
250 Savage
375 Winchester
348 Winchester

Definitely the first 2. A special run of a couple of "classic" calibers each year would sell like hotcakes!

44 Man · « **Reply #415 on:** December 11, 2012, 12:17:16 PM »

I'd definately second the 250 Savage! I want a .25 but not all the buck and roar of the 25-06.
Also the 6.5 x 55 Or as the gentleman said, barrels bored in those bore sizes so we can chamber our own ctg! 44 Man

Rustyinfla · « **Reply #416 on:** December 11, 2012, 12:19:18 PM »

I like the idea of a TC in .30-30.

Remington should also consider chamberings that could be made into other calibers with nothing more than a reamer and ejector change.

Also a bull barrel .223 w/ a 1:9 twist.

hoytcanon · « **Reply #417 on:** December 11, 2012, 12:25:52 PM »

Quote from: Rustyinfla on December 11, 2012, 12:19:18 PM

I like the idea of a TC in .30-30.

Remington should also consider chamberings that could be made into other calibers with nothing more than a reamer and ejector change.

Also a bull barrel .223 w/ a 1:9 twist.

You're in luck... they already make this one.

Catshooter45 · « **Reply #418 on:** December 11, 2012, 12:30:33 PM »

Ditto on the non-chambered rifles in all the bore sizes! That'd be dang cool. In heavy, standard, and light. Make 'em long too, that way if someone is gonna go to the trouble of chambering they can have it cut to the length they want.

Cat

Brian P. · « **Reply #419 on:** December 11, 2012, 12:36:09 PM »

17Rem OR Mach IV in thumbhole laminate, SS, standard contour barrel at 24" . 1/9 twist to make it handle 25gr Vmax and 30gr Golds bullets and short throat. PERFECT fur gun!