« previous next »
Pages: [1]   Go Down

Author Topic: H&R 088 410 SHOTGUN  (Read 2863 times)

0 Members and 1 Guest are viewing this topic.

Offline bobby964

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
H&R 088 410 SHOTGUN
« on: December 05, 2006, 05:33:48 AM »
I have a H&R 410 MDEL 088 in pieces and am wondering if its possible to put a 22 hornet barrel on it or maybe a 243 barrel on it to make it a rifle instead of a shotgun? I already have a 410 shotgun don't need another one.
Logged

Offline pills

  • Trade Count: (8)
  • Contributor
  • ***
  • Posts: 421
Re: H&R 088 410 SHOTGUN
« Reply #1 on: December 05, 2006, 06:11:49 AM »
H&R /NEF will not fit a barrel to that frame. There are some of us who ignore the warnings of H&R and fit other barrels to shotgun receivers. We do this to our own perril if you will.

Logged
...You do not open your mouth without all the facts period...

Matt

Remember this, my dear brothers and sisters: Everyone should be quick to listen, slow to speak, and should not get angry easily. James 1:19

Offline bobby964

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: H&R 088 410 SHOTGUN
« Reply #2 on: December 05, 2006, 06:27:02 AM »
Are the frames different? The look the same I have not personally looked at them side by side to compare.I would appreciate any info.Thanks.
Logged

Offline pills

  • Trade Count: (8)
  • Contributor
  • ***
  • Posts: 421
Re: H&R 088 410 SHOTGUN
« Reply #3 on: December 05, 2006, 06:33:09 AM »
I would encourage you to read this and form your own opinion. Keep in mind some centerfire barrels were fitted to sb1 frames before NEF took over and said it could not be done

http://www.graybeardoutdoors.com/smf/index.php/topic,80979.0.html

I hope to have the results for rockwell testing a sb1 and sb2 frame soon. I will post here as well as other places.

Logged
...You do not open your mouth without all the facts period...

Matt

Remember this, my dear brothers and sisters: Everyone should be quick to listen, slow to speak, and should not get angry easily. James 1:19

Offline bobby964

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: H&R 088 410 SHOTGUN
« Reply #4 on: December 05, 2006, 06:43:21 AM »
 Thanks for all your help.Very good information.I guess I need to find out at what pressure a 22 hornet is at and then decide whether or not I am going to do it.
Logged

Offline Robert

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1618
Re: H&R 088 410 SHOTGUN
« Reply #5 on: December 05, 2006, 08:20:40 AM »
The strength of the action is not the only consideration of course.  You will also have to see if the barrel fits properly, or if it needs some 'smithing' for it to fit snug.  Same as switching any other rifle barrels back and forth on receivers.  You might get lucky.  I tried my 7.62x39 barrel on my 12 gauge receiver....but this was only with light loads, worked fine.  A 12 gauge shot-gun is ceratinly NOT a Low Pressure firearm.....I have no doubt that many of the lower pressure centerfires would work.....  For the sake of Liability though, I doubt that NEF would encourage this.  I doubt if Graybeard or GBO would endorse it either, for the same reasons.  Just make sure that whatever you do...Do it safely.  Check and compare pressures of the cartridge.  P.S.....the 410 receiver is identical and the same strength as a 20 or 12.
Logged
....make it count

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: H&R 088 410 SHOTGUN
« Reply #6 on: December 05, 2006, 08:34:17 AM »
Compared to any centerfire rifle cartridge, all shotgun gauges are low pressure! See the SAAMI MAPs at the link below.

Tim

http://www.frfrogspad.com/miscellk.htm#pressure

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline pills

  • Trade Count: (8)
  • Contributor
  • ***
  • Posts: 421
Re: H&R 088 410 SHOTGUN
« Reply #7 on: December 05, 2006, 08:41:00 AM »
The question is where that pressure is applied. If all that pressure was coming straight back there would be alot of one armed ex shooters.  :P

.22RF Long & LR      24,000
45-70 Government       28,000

.38 S&W     14,500
.410 Bore 3"     13,500



I will quit for now before I pop the seal on this can of worms again.

Logged
...You do not open your mouth without all the facts period...

Matt

Remember this, my dear brothers and sisters: Everyone should be quick to listen, slow to speak, and should not get angry easily. James 1:19

Offline bobby964

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: H&R 088 410 SHOTGUN
« Reply #8 on: December 05, 2006, 10:45:24 AM »
I have already checked it out. The 22 Hornet has 41000 cup and the 410 has 13500 cup too much difference for me to mess with.I will have to find another route to take to get a 22 Hornet.I am not able to purchase one out right as of now. I have limited funds and I thought this would work.I have a 22 magnum Marlin 783 I will look into maybe trying to have rechambered and bolt modified to shoot 22 Hornet.Thanks for all your help
Logged

Offline pills

  • Trade Count: (8)
  • Contributor
  • ***
  • Posts: 421
Re: H&R 088 410 SHOTGUN
« Reply #9 on: December 05, 2006, 01:01:07 PM »
I suppose it wont make any difference for you to know that H&R used to put that barrel on the topper. Crazy buggers they were.
Logged
...You do not open your mouth without all the facts period...

Matt

Remember this, my dear brothers and sisters: Everyone should be quick to listen, slow to speak, and should not get angry easily. James 1:19

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: H&R 088 410 SHOTGUN
« Reply #10 on: December 05, 2006, 01:44:57 PM »
H&R has some other similar barrel fitting querks, they won't fit a .25-06 barrel, or any high pressure caliber for that matter, to any SB2 frame made before 1999, even to a frame that came with one on it originally!! Those barrels marked with asterisks in the accessory barrel list are the high pressure calibers, although there are some errors in the list. Not all of the .243 barrels are marked, the .500 S&W should be marked as it has a higher SAAMI MAP than the .450 Marlin that is marked!! ::)

Tim

http://hr1871.com/Support/accessoryProgram.aspx
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Swampman

  • Guest
Re: H&R 088 410 SHOTGUN
« Reply #11 on: December 06, 2006, 12:33:50 AM »
I would think the back thrust on the hornet would be very light.  I can't see it hurting a SB1 frame.
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: H&R 088 410 SHOTGUN
« Reply #12 on: December 06, 2006, 02:27:06 AM »
I will not say you should do it but many here have fired a .22 Hornet barrel off of a Model 88 frame with no problems, myself included. Just go slow and watch for any signs of problems. You should see none. Welcome aboard bobby964 and Merry Christmas....<><.... :)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline bobby964

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: H&R 088 410 SHOTGUN
« Reply #13 on: December 06, 2006, 03:48:34 AM »
Thanks everybody I guess I'll start looking for a 22 Hornet barrel,and MERRY CHRISTMAS to everyone
Logged
Pages: [1]   Go Up
« previous next »