« previous next »
Pages: [1]   Go Down

Author Topic: replacing transfer bar ?  (Read 1327 times)

0 Members and 3 Guests are viewing this topic.

Offline Tigerinexile

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
  • Gender: Male
replacing transfer bar ?
« on: January 05, 2007, 07:39:55 AM »
I recently picked up a Topper mod 88 at a pawn shop.  The gun is good shape but someone has arkansased it up.  The striker bar is missing and the hammer was rigged up to hit firing pin.  I have located parts at Brownells,  is this a dyi or should I take it to the shop?  Thanks for any info you can give.
Logged
My GOD, my GOD, Ihave so much left to do, who will take care of my darling LSU?

Huey P. Long

Offline naedlaen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 53
Re: replacing transfer bar ?
« Reply #1 on: January 05, 2007, 08:26:55 AM »
There are instructions for a trigger job in the NEF centerfire forum in the sticky thread labled "FAQ and Help"  Perklo's instructions come with excellent photos and hints.  Scroll down the thread a waysMany have disassembled their receivers and put them back together.  You can decide if you want to tackle it after reading the information.  http://perkloafm.com/ will get you there as well.

Neal
Logged

Offline Tigerinexile

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
  • Gender: Male
Re: replacing transfer bar ?
« Reply #2 on: January 05, 2007, 09:08:50 AM »
Thanks very much
Logged
My GOD, my GOD, Ihave so much left to do, who will take care of my darling LSU?

Huey P. Long

Offline Tigerinexile

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
  • Gender: Male
Re: replacing transfer bar ?
« Reply #3 on: January 09, 2007, 09:13:35 AM »
I stopped by a gun shop today and the gun smith asked if the gun had the thick or thin bar because they were not interchangeable.  Anyone ever hear of this.
Logged
My GOD, my GOD, Ihave so much left to do, who will take care of my darling LSU?

Huey P. Long

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: replacing transfer bar ?
« Reply #4 on: January 09, 2007, 10:08:56 AM »
H&R and Brownells both only list one transfer bar(lifter and striker) assembly, it's part number S02043 on H&R's parts list. I'd say the smith was thinking of either another brand, or the old H&Rs prior to 1987.

Tim

http://www.brownells.com/aspx/NS/store/productdetail.aspx?p=7140&s=
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »