Author Topic: Can I can do it? (With a little help from my friends) (Read 1651 times)

Pharmboy · « **on:** January 14, 2007, 01:52:46 PM »

Okay,
I think I can do it. I want to make my 357 mag barrel a MAX. I can rent a reamer from a reamer rental .com. Do I need to get the floating reamer or solid chamber reamer. Do I need a pilot bushing? I can rent for three days or 2 weeks. Do I need to get a T-handle and some cutting oil? I assume I twist the reamer in until it is snug with the barrel. It is said that it is an easy job but I have alot of anxiety and would like to give it a try with a little help from my friends.

I recently got Lee Anniversary Reloader for a 357 B@D. Now I want to reload for the 357 Max. I know alot of ya have and love the MAX.

Please Advise,
Pharmboy

quickdtoo · « **Reply #1 on:** January 14, 2007, 02:06:34 PM »

I haven't done a chamber, just a couple throatings, but I would highly recommend renting from Fred at 4D, he's a GBO sponsor and his reamers are excellent, fast service too. I'll leave the chamber reaming advice to those that have done it, there's plenty of em here!!!

Tim

http://www.4-dproducts.com/

Badnews Bob · « **Reply #2 on:** January 14, 2007, 02:18:31 PM »

Yes you can! Its very easy and it will almost take you longer to unpack the reamer than doing the job. Lotsa cutting oil and a T handle is all you need, The reamer will bottom out on the rin so it won't cut to far. The reamer alot of us used here was solid no pilot bushing, This makes for a grat shooting rifle and very easy to reload for uses the same dies as a .357 mag. Go for man.

Pharmboy · « **Reply #3 on:** January 14, 2007, 02:56:28 PM »

Thanks,
Fred from 4D is at the shot show in Florida till the 19th. I will get the dies ordered in the meantime. I saw in another thread that the IMR 4227 powder is okay to use and I just happen to have some. I will probably have to get some more primers though. I have the Winchester Large pistol for the 357/44 B&D and also some CCI 400 small rifle primers for my Huntsman ML. I guess I'll have to drive to OKlahoma City to Bass Pro. What a shame. (ha, ha)

Thanks Again,
Jerry

eskimo36 · « **Reply #4 on:** January 15, 2007, 01:38:20 AM »

Drive on to the north side of OKC to sportsman's warehouse (Corner of N Penn and Memorial)...a lot more choices of everything shooting related....and not all that crap in the middle like BPS, IMHO.

Datil · « **Reply #5 on:** January 15, 2007, 02:09:48 AM »

I did the ream ing in a bout 15 minutes very easy job.
Last june watched aman do one under acedar tree,
used a chuck off of a drill to turn resmer.
You like the Maxie. Marv.

P. S. You want to use small tifle primers in a Handi!

ONE HOLE 4570 · « **Reply #6 on:** January 15, 2007, 02:23:49 AM »

Sprortsman's wearhouse has alot of reloading supplies compaired to the gun shops around OKC these days, alot more powder selection. Give it a try if you are up in the city

MSP Ret · « **Reply #7 on:** January 15, 2007, 06:57:09 AM »

Pharmboy, I don't know if this will help you out or not but a week or 2 ago I swapped a 26" .280 Remington Handi barrel on this site for a like new 2004 Handi .357 Max barrel. It was originally a .357 Mag and was transformed into a .357 Max at the last P-Dog shoot. I am only going to send this barrel in to be rechambered to my long sought after .35 Remington so if you want to swap barrels it's fine with me, Whichever barrel I send in will be rechambered anyway and this way you will end up with a .357 Max for the shipping of about $12.40. Just an offer to help you out if you are interested and if your barrel is in comparable condition and about as new....<><....

here is the thread where I acquired the barrel if it of interest to you, it's long but FYI...

http://www.graybeardoutdoors.com/smf/index.php/topic,106771.0.html

(I mistakenly posted this to another thread first so I deleted it and reposted here, am I embarassed...

)

shaner · « **Reply #8 on:** January 15, 2007, 11:27:22 AM »

i got one i wantto ream also pharmboy l;et me know how u getalong
whats the cost of renting

quickdtoo · « **Reply #9 on:** January 15, 2007, 11:52:03 AM »

Rental costs are on Fred's web site, click the caliber...

Tim

http://www.4-dproducts.com/display.php?group=Pistol+Calibers

shaner · « **Reply #10 on:** January 15, 2007, 12:22:58 PM »

thanks tim,

Pharmboy · « **Reply #11 on:** January 15, 2007, 02:19:41 PM »

MSP,
It would be cheaper for me to trade barrels with ya. If that is not too big of a deal for you, I would do that. I bought this barrel from Darat in August. He said it was a real good shooter. It is in real good shape. Have you shot your Max yet? Probably not since you just got it to rechamber for a 35 Rem. Let me know how you would like this swap to go forward.

Thanks,
Pharmboy

P.S. I hope to be able to do the PD Shoot 07

MSP Ret · « **Reply #12 on:** January 15, 2007, 03:55:38 PM »

Hi buddy, do you know where Darat got it or how long he had it? I am wondering what the year of production was, the first 2 numbers of the serial number of the gun it came off. Which style iron sights does it have on it? I doubt if I can make the 07 PD shoot Pharmboy, it's just to far to go in a truck that get's about 12 mpg and the cost of gas. I am having a hard time justifying a trip to my camo in Maine with gas and the few tolls running about $85.00 each way. I had expected to be there now but here I sit. I think something can be worked out here to help you and Shaner both out even if it does not involve my barrel....<><....

shaner · « **Reply #13 on:** January 15, 2007, 04:38:53 PM »

id liketo go ahead na chamber mine barrel i got from eskimo it shoots great now but id like to try a max , never had the chance pick up a hundred brass and give it a try there use to be a few reamers floatin around people were borrowin>?

Pharmboy · « **Reply #14 on:** January 15, 2007, 05:03:32 PM »

I'm almost past the point of no return. I ordered the brass, shellholder and the dies for the Mad Max. There is a good thread from Feb 04 about this round. I ordered Hornaday 110 gr xtp bullets before I read this other post and it seems as if the Max likes the heavier bullets. Check out those Hornaday 180 gr SSP, a pointed bullet in a handgun cartridge. I had to work at the hospital all weekend so next week I will go out and shoot the 357/44 B&D I loaded up for the TC Contender and load some Max cartridges for the NEF until I get the Mighty Max reamed.

I looked at the map and the Sportman's Wharehouse is actually closer than Bass Pro. I will go there to get powder and primers. It costs to much to have that stuff shipped.

Love it when a deal comes together,
Pharmboy (Jerry)

MSP Ret · « **Reply #15 on:** January 15, 2007, 05:04:44 PM »

Thats a great question Shaner, I am getting in touch with Pharmboy and perhaps we can locate the reamer that was going around for both of you to use. There was one around here that was available for shipping and a few bucks to help offset the cost of the reamer. With any luck and with some publicity perhaps it will surface and you both can use it, at least which ever needs it....<><....

shaner · « **Reply #16 on:** January 15, 2007, 05:16:37 PM »

sounds good to me, yeah a while back there was a couple floatin around? thanks for the help

Pharmboy · « **Reply #17 on:** January 17, 2007, 05:59:58 PM »

The Big Brown Truck pulled up and dropped off the brass and dies for the Max. I loaded one up and am just waiting for the barrel that MSP swapped with me (thanks Andy). Can't wait to shoot it but it looks like the weather in OKlahoma might not cooperate. Wait, those hogs should be easier to track in the snow. I'm pumped. By the way, did you see the way I bid that 38-55 on E-bay up. I am not going to by on e-bay anymore but I am going to increase the value on what we already have. I guess sending the receiver to NEF and have the barrel professionally fitted ain't soooo bad. Just have to have a few receivers.

Later,
Pharmboy

shaner · « **Reply #18 on:** January 18, 2007, 06:34:39 AM »

hey pharmboy, i found us a reamer for the 357 max,
ill have it in a few days , a guy on another forum had the one i had couple years agoo, i have to pay shipping back an forth for the use

interested?? let me know

MSP Ret · « **Reply #19 on:** January 18, 2007, 09:05:05 AM »

Hey Shaner, I am so happy you located a reamer!!! I did do th swap with Pharmboy since I did not need this barrel to be a Max since it is going to become a .35 Remington anyway. Looks like were all good to go now....

And Pharmboy, that barrel should be there by tomorrow and the snow sounds great to track those pigs in. A great first use of the .357 Max. Keep us informed on the proceedings and let me know when the barrel gets there and how it fits, I am thinking yours will get there about a day before I get this one at this end and if your new one fits your reciever the one you are sening me should fit at this end, if not fitting is pretty simple, let me know....<><....

shaner · « **Reply #20 on:** January 19, 2007, 01:17:19 AM »

yu mean all my work for not?

?/ hahahha no iam gettin it here iam goin to max the barrel i got off eskimo might as well i have a few max brass i got in a deal , soooooooo might as well have more fun, i figure its gotto be as good if not betterto play with then a 30 twice?

Pharmboy · « **Reply #21 on:** January 19, 2007, 05:32:41 PM »

Hey guys,
Swapped .357Max barrels with MSP and every thing is a go. I loaded up some 357 Max Rem brass with IMR 4227 with 26grs. and a Hornaday 110 gr. XTP bullet and will see wha it will do. I will go after the little piggies with it and let the "Big Ones" have it with the 45/70 when it's their time. I will also have a TC Contender in 357/44 B&D for back up with 125 gr XTP's with the same load. I have not shot either so it should be intersting!!

The weather here is raining and in the thirties and dropping so I hope it is not a repeat of last week.

Later
Pharmboy

P.S. Shaner, thanks for lookin into the reameR. I got this deal with MSP RET (Andy) and we made the swap. Keep with the Mad Max because it looks to be a real COOL CARTRIDGE!!

shaner · « **Reply #22 on:** January 20, 2007, 01:09:56 AM »

your goin to run a 110 gr in the max?? wow that should cook out the end of it, i never had a lot of lot with 110 gr bullets in handguns, i always ended up back with 125 gr the XTP will work for ya , at those speeds whew look out piggie the grim reaper is on ya

hellacatcher · « **Reply #23 on:** January 20, 2007, 01:38:59 AM »

Pharmboy glad to see you got that barrel if it is the one I think it is I was there when it was reamed. Then fellow who did it is a master machinest and a good friend of mine. The reamer that was used was the excate size for the chamber. The best loads I have used in mine has been 26grs of AA1680 with 180 gr JHP remingtons or hornady hp/xtp's. Try that load and let us know what it does.

lik2hunt · « **Reply #24 on:** January 20, 2007, 03:07:02 AM »

Quote

Pharmboy glad to see you got that barrel if it is the one I think it is I was there when it was reamed. Then fellow who did it is a master machinest and a good friend of mine. The reamer that was used was the excate size for the chamber. The best loads I have used in mine has been 26grs of AA1680 with 180 gr JHP remingtons or hornady hp/xtp's. Try that load and let us know what it does.

Yep that's the one Paul. Just couldn't find the time to work on it and got the .280 bug REALLY bad. I think I can fit the .280 into my hunting plans better than I could the Max anyway. Apprecaite all you and Jimmy did to get me fixed up with it though and looking forward to seeing you guys again in a few months.
Pharmboy, that was my barrel originally and I never took the time or effort to work up a load for it so I'm gonna be watching with interest to see how it does for ya. Glad you got it and that Andy got a non-reamed one for his endeavor as well. I like it, three members all happy and pleased with trades, nice place to be a part of.

MSP Ret · « **Reply #25 on:** January 20, 2007, 04:30:53 AM »

This whole swap thing was really great guys and the way I think this site should work, members here getting things, swapping them to brothers here and all ending up with something they want. The barrels are nice but I find the hunt and the swaps just as exciting. Lik2hunt had his .357 Max and decided he could use a .280 Remington more, which he now has since I had an extra .280 Rem and needed a .357 Mag or Max to be rechambered into my long desired .35 Remington. I swapped with Lik2hunt, and then Pharmboy had a .357 Mag and wanted a .357 Max, it made no difference to me which I had since if I sent in a .357 Mag or a .357 Max it was going to be rechambered to a .35 Remington anyway. Pharmboy and I each had .357 barrels which look like new and appeared to come from the same production run in 2004, that special run of 100 barrels. Pharmboy and I swapped and each of our "new" barrels fit up snug and perfectly with our recievers. Pharmboy even sent me some cash to cover my end of the shipping and the old size Survivor forearm screw I have needed!!!..Thanks!!

So I ask you,.........Is everybody HAPPY?!!!!!

This place should work so well all the time, Thanks to all involved and to both Lik2hunt and
Pharmboy. I have entered positive feedback for each of you in the system....<><....

all I need now is my .45 ACP barrel and I will never buy another........sure....<><....

shaner · « **Reply #26 on:** January 20, 2007, 09:11:27 AM »

ive done similar deals here myself , no names need mentioned but probobly at least a dozen , or more i can count on , but yes yu are 110% right, trade swappin thats what ita all about i better stop now while i can before i start yappin hahahah

Pharmboy · « **Reply #27 on:** January 20, 2007, 10:58:34 AM »

I'm Happy,
I have a 357 Max, Lee reloader with dies and brass and powder and just ordered a 3-10x57mm scope to see in the dark. My buddy called and said that we are wanted to help control a "HOG" problem.

I can't be happier!!

Pharmboy

dw06 · « **Reply #28 on:** January 20, 2007, 11:45:30 AM »

WOW,you all did good.I got dizzy just reading all the swapping!