Author Topic: Bushy varminter two stage trigger help  (Read 481 times)

0 Members and 1 Guest are viewing this topic.

Offline handi270

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Bushy varminter two stage trigger help
« on: February 02, 2007, 07:04:10 AM »
My son recently brought me a Bushmaster Varminter and said "Here you can use this."  It is in good shape and shoots very accurately.  But I don't understand the two stage trigger.  I expected to "feel" that it was at the second stage and was going to fire at the next pressure from the trigger finger.
Instead it just seems to have a rather long pull with no indication of a second stage.
This is a used gun.
Is something wrong. does it need lubricating,  or are my expectations wrong?
I have done some searching here and also looked at the Bushmaster site, but nothing helped.
Thanks. ???

Offline mt3030

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 939
  • Gender: Male
Re: Bushy varminter two stage trigger help
« Reply #1 on: February 03, 2007, 03:22:19 AM »
You are correct. You should feel a slight increase in trigger resistance as you reach the second stage. Either the trigger is defective, misadjusted, or has been replaced with a single stage.
Great Falls, Montana
_________________
NRA Life Member
Rocky Mountain Elk Foundation
Ducks Unlimited

Deceased 6/2/2007

Offline handi270

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Re: Bushy varminter two stage trigger help
« Reply #2 on: February 03, 2007, 11:30:00 AM »
mt3030
Thanks for the reply. I will do more checking.