« previous next »
Pages: [1]   Go Down

Author Topic: Throat dia.  (Read 790 times)

0 Members and 1 Guest are viewing this topic.

Offline swampthing

  • Trade Count: (6)
  • A Real Regular
  • ****
  • Posts: 517
Throat dia.
« on: February 07, 2007, 02:27:34 PM »
What are the throat diameters of your .44cal and .45cal F/A's? if you've got it handy what were the bore dia. as well.
Thanks alot.
Logged

Offline 454PB

  • Trade Count: (0)
  • Member
  • *
  • Posts: 64
Re: Throat dia.
« Reply #1 on: February 07, 2007, 06:58:18 PM »
On my 83 in .454 Casull, exactly .452 for both, and anything bigger won't chamber without force.
Logged

Offline STJ

  • Trade Count: (0)
  • Member
  • *
  • Posts: 92
Re: Throat dia.
« Reply #2 on: February 17, 2007, 11:40:21 AM »
Well...My 454 has 0.452 throats and bore.

On my 44sp, I had a issue.  I bought it new from FA and it had 0.432 bore and 0.430 throats.  Not a good combo, the barrel would lead with mild loads.  I called FA after I had made sure I measured everything correctly (used a proper bore/throat slugging kit).  They had me send it in.  Bob Baker called me and we discussed the issue (I was a bit surprised by that one)  He had a new hand picked barrel installed that was measured for bore dia and the throats opened up a tad.  The throats are now 0.05 thou over bore...

FA gets their barrels from a supplier, so having a off size barrel is a possibility.  All I can say is FA did what was needed to make me happy..
Logged
Pages: [1]   Go Up
« previous next »