« previous next »
Pages: [1]   Go Down

Author Topic: Parkerising  (Read 533 times)

0 Members and 1 Guest are viewing this topic.

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Parkerising
« on: February 11, 2007, 08:02:15 PM »
Just finished my first parkerising job on a bolt for a Remington 581 conversion to 22 hornet.  It is dead easy, Midway has the solution, so a stainless bowl on the stove at about 180 degrees F and you are all set.  I sand blasted the parts and in about twenty minutes in the solution they were very nice and black. Amazing stuff.   Larry



Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: Parkerising
« Reply #1 on: February 13, 2007, 03:12:48 AM »
Looks like a good job! I always try to parkerize instead of blue if the customer will let me. It's way easier and holds up better. Just looks weird on some guns, like Win 94's and such. The only thing I'd add is when blasting, I use silicon carbide and not aluminum oxide. I've had the al. oxide mess up the finish by getting imbedded in the metal and ending up spotty. Also, oil is the enemy of parkerizing! Wear rubber gloves and don't let the slightest speck of oil get on your part or it won't finish properly.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Parkerising
« Reply #2 on: February 16, 2007, 04:45:14 PM »
Do you know if you can use an aluminum container to parkerize in?  I used stainless on this one, but aluminum would be much easier to find for the long barreled action I need to do.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Parkerising
« Reply #3 on: February 18, 2007, 04:33:27 PM »
I don't believe aluminum would be a good idea..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline muskeg13

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 208
Re: Parkerising
« Reply #4 on: February 18, 2007, 08:10:58 PM »
If you parkerize the barrel, be sure to plug the bore.  I had a barrel ruined a few years ago because the parkerizing solution etched the bore and chamber.  In my case, things turned out ok because I got an excellent hammer forged match barrel as a replacement.
Logged
Pages: [1]   Go Up
« previous next »