« previous next »
Pages: [1]   Go Down

Author Topic: Outside diameter of barrel, chamber end.  (Read 761 times)

0 Members and 1 Guest are viewing this topic.

Offline stiga

  • Trade Count: (0)
  • Member
  • *
  • Posts: 24
Outside diameter of barrel, chamber end.
« on: February 27, 2007, 07:42:37 AM »
Does anybody have the oportunity to measure the diameter of the chamber end on a handi rifle? And what type screws are the barrel drilled fore? Questions, questions, questions ::)

Stig
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Diameter of barrel, chamber end.
« Reply #1 on: February 27, 2007, 09:17:10 AM »
Bull barrels will measure about .800", standard barrels any where from .625" to .700" at the muzzle, all barrels measure 1.1XX" at the chamber except the 10ga shotgun and 12ga slug gun which use bigger frames.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline stiga

  • Trade Count: (0)
  • Member
  • *
  • Posts: 24
Re: Outside diameter of barrel, chamber end.
« Reply #2 on: February 27, 2007, 09:31:58 AM »
Thanks a bunch :) Thought I might use one of the unfinished bases from Midway. They have a base for the rear mauser receiver ring that fits a diameter of 1.05. This should be quite easy to modify. Do you know if the barrel is threaded for 6-48 og 8-40 screws?

Stig
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Outside diameter of barrel, chamber end.
« Reply #3 on: February 27, 2007, 09:33:38 AM »
6-48  ;)
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline stiga

  • Trade Count: (0)
  • Member
  • *
  • Posts: 24
Re: Outside diameter of barrel, chamber end.
« Reply #4 on: February 27, 2007, 09:36:05 AM »
Again thanks. Now i can order all the supplies i need. Starting to feel like a kid at christmas ;D

Stig
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Outside diameter of barrel, chamber end.
« Reply #5 on: February 27, 2007, 10:06:22 AM »
There are 3 holes, the rear 2 are on a 1" center, the forward hole is 1.3" forward of the middle hole.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »