www.GBOReloaded.com
Home
Help
Articles
Classifieds
Login
Register
Graybeard Outdoors (GBO Reloaded)
»
H&R Talk
»
H&R Centerfire Rifles
(Moderator:
quickdtoo
) »
barrel liner in a handi barrel?
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: barrel liner in a handi barrel? (Read 900 times)
0 Members and 2 Guests are viewing this topic.
eskimo36
Trade Count:
(
156
)
Senior Member
Posts: 1359
Gender:
barrel liner in a handi barrel?
«
on:
April 02, 2007, 04:38:30 AM »
Anyone here in the Handi Brain Trust ever consider putting a .500 diameter barrel liner chambered in 32-30 or 25-20 in a 500 S&W barrel? Thoughts? Opinions? Thanks guys.
Logged
"one shot is usually enough"
Smokin Joe
Trade Count:
(
6
)
Senior Member
Posts: 1230
Re: barrel liner in a handi barrel?
«
Reply #1 on:
April 02, 2007, 06:54:19 AM »
Are you talking about a permanent liner to change the caliber or a "removable" type barrel insert to allow smaller rounds to be used?
I've made several permanent inserts and stub jobs.......... .32-20 was the last one.
Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion
eskimo36
Trade Count:
(
156
)
Senior Member
Posts: 1359
Gender:
Re: barrel liner in a handi barrel?
«
Reply #2 on:
April 02, 2007, 07:43:52 AM »
i was thinking permanent for lower pressure rounds like the 25-20 and 32-20. It would make a heavy barrel putting a liner in a 500 but it should be fairly easy to do....i think.
Logged
"one shot is usually enough"
Winter Hawk
Trade Count:
(
47
)
Senior Member
Posts: 1947
Gender:
Re: barrel liner in a handi barrel?
«
Reply #3 on:
April 02, 2007, 09:47:35 AM »
Maybe put one in a .410 barrel? Just a thought...
-WH-
Logged
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone
eskimo36
Trade Count:
(
156
)
Senior Member
Posts: 1359
Gender:
Re: barrel liner in a handi barrel?
«
Reply #4 on:
April 02, 2007, 01:11:42 PM »
Off hand can anyone tell me what nominal bore size is for the 410, 28 and 20 ga?
Logged
"one shot is usually enough"
trotterlg
GBO Supporter
Trade Count:
(
36
)
Senior Member
Posts: 3978
Gender:
Re: barrel liner in a handi barrel?
«
Reply #5 on:
April 02, 2007, 01:26:47 PM »
Liners are about $100.00, just bore the barrel to fit and epoxy them in. Low pressure rounds only, Larry
http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=10976&title=CENTERFIRE+BARREL+LINER
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.
Smokin Joe
Trade Count:
(
6
)
Senior Member
Posts: 1230
Re: barrel liner in a handi barrel?
«
Reply #6 on:
April 02, 2007, 03:13:52 PM »
.410, .550, .615
Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion
Smokin Joe
Trade Count:
(
6
)
Senior Member
Posts: 1230
Re: barrel liner in a handi barrel?
«
Reply #7 on:
April 02, 2007, 03:17:00 PM »
Also, check these out:
http://www.trackofthewolf.com/(S(gxl1tt55ituisr2ijfyezq45))/categories/tableList.aspx?catID=14&subID=142&styleID=483
Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion
eskimo36
Trade Count:
(
156
)
Senior Member
Posts: 1359
Gender:
Re: barrel liner in a handi barrel?
«
Reply #8 on:
April 02, 2007, 03:24:01 PM »
It looks like there is only about 0.0275 keeping a 7/16" 25-20 liner from going in a 410. I like the way you guys think.
Logged
"one shot is usually enough"
Smokin Joe
Trade Count:
(
6
)
Senior Member
Posts: 1230
Re: barrel liner in a handi barrel?
«
Reply #9 on:
April 02, 2007, 03:45:34 PM »
Just give the job to a lazy guy.......works every time!
Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion
trotterlg
GBO Supporter
Trade Count:
(
36
)
Senior Member
Posts: 3978
Gender:
Re: barrel liner in a handi barrel?
«
Reply #10 on:
April 03, 2007, 05:58:06 PM »
I think the only problem with the 410 is that the chamber is most likely a little large for the 25-20 liner, but you may be able to just run some sliver solder around it and have it be happy. Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.
eskimo36
Trade Count:
(
156
)
Senior Member
Posts: 1359
Gender:
Re: barrel liner in a handi barrel?
«
Reply #11 on:
April 04, 2007, 03:13:12 AM »
I was thinking to just drill the few extra thousandths out of the whole barrel to fit the liner and epoxy it in with acra glass as in brownells instructions concerning relining. I still might need some sort of bushing to fit in the chamber between the chamber walls and the liner.
Logged
"one shot is usually enough"
trotterlg
GBO Supporter
Trade Count:
(
36
)
Senior Member
Posts: 3978
Gender:
Re: barrel liner in a handi barrel?
«
Reply #12 on:
April 04, 2007, 03:32:04 AM »
Probably the way to go would be to bore the chamber slightly over size, then press in a bushing and drill the whole barrel to fit the liner. Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.
Print
Pages: [
1
]
Go Up
« previous
next »
Graybeard Outdoors (GBO Reloaded)
»
H&R Talk
»
H&R Centerfire Rifles
(Moderator:
quickdtoo
) »
barrel liner in a handi barrel?