Author Topic: Single Six Question  (Read 1069 times)

0 Members and 1 Guest are viewing this topic.

Offline Cookiemann

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1749
  • Apple Valley, MN
Single Six Question
« on: April 22, 2007, 06:55:30 AM »
What's this mean..."improved transfer bar"?


Quote
Ruger Single Six 22LR/22 Mag. Limited production of only 500 of these were manufactured by Ruger exclusively for Davidson's in Prescott, Az. These were the only Classic Single Revolvers ever produced with the improved transfer bars. Copy of Ruger factory letter sent from J. Thompson Ruger, V.P. Marketing of Ruger, to Davidson's on 8-16-89 included.

Thanks, cookiemann
NOT ON MY WATCH

"AIM small...MISS small"

Offline David Carey

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 266
Re: Single Six Question
« Reply #1 on: April 22, 2007, 07:40:56 PM »
From Gunblast

"A key difference between the "Old Model" Ruger Bearcat and the new guns is Ruger's patented transfer bar safety mechanism. The transfer bar transfers energy from the falling hammer to the floating firing pin, and retracts to prevent hammer contact with the firing pin unless the hammer is held back. This Ruger innovation was the first safety improvement to the lockwork of a single-action revolver since the Colts of 1836.
Unlike the Colts and "Old Model" Rugers, the Bearcat (along with all "New Model" Rugers) can be safely carried with all chambers loaded."

I think your answer is in the last sentence.
Dave
NRA Life Member

Offline Cookiemann

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1749
  • Apple Valley, MN
Re: Single Six Question
« Reply #2 on: April 25, 2007, 11:50:21 PM »
Thanks David.  I thought that is what they meant, but just wasn't sure.  There must have been some other design changes that were implemented, also, that make the distintion of this model special.  Thanks for your input.

cookiemann
NOT ON MY WATCH

"AIM small...MISS small"