Need 9.3x62 Load Data

[panhandle]

Does anyone have a good pet load they would like to share for a 250 grain Nosler AccraBond. Done a search and found lots of loads for the 285-286 grain bullets but not much on the 250 gr.

[TNrifleman]

These two powders should give you good service in the 9.3x62 with the Nosler 250 grain:

IMR 4895- 52.0 to 56.0 grains

IMR 4064- 52.0 to 56.0 grains

Either max load should produce a bit over 2500 fps, depending on your barrel's length.

[Boxhead]

I use VV-N550 in my 9.3's with the 250 gr X. While developing loads I found RL-15 to be excellent as well.

[Buckfever]

See thanks to Bear thread above.    Buckfever

[panhandle]

Buckfever---you reply lost me!!!!!!!!!!!!!!

[Buckfever]

I wrote a thank you to Bear for giving me a 9.3x62 load and it is in the section.  I don't know if you ever need a 286.gr load but it is very accurate and has some smack down to it!    Buckfever

[panhandle]

Thanks Buckfever, but still can't find anything.  I tried a search and can't find anything, probably not doing it right.  Don't like the search on this forum, can't get it to work for me.  Thanks anyway.

[RaySendero]

Thanks Buckfever, but still can't find anything.  I tried a search and can't find anything, probably not doing it right.  Don't like the search on this forum, can't get it to work for me.  Thanks anyway.

Try this site link:  http://stevespages.com/366_1_250.html

[Buckfever]

It's a few messages down from this one.  title Is  Thanks Bear for............    Buckfever