« previous next »
Pages: [1]   Go Down

Author Topic: 22-250 Encore  (Read 644 times)

0 Members and 1 Guest are viewing this topic.

Offline DICK

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
22-250 Encore
« on: May 22, 2003, 12:13:46 PM »
Looking for info and feed back regarding a 26" heavy barrel in 22-250 on a Encore frame. I already have the Encore frame and thinking about buying the barrel to make a Varmite rifle. Has anyone done this before? Or any pet 22-250 loads they may would like to share?

Thanks for any information,
Logged
American by birth, Texan by the grace of God.

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
22-250 Encore
« Reply #1 on: May 22, 2003, 03:59:25 PM »
Mine likes a 55gr blitz king with 35gr of IMR4895. Shoots 1/2" on a good day. Use mine for prairie dogs out to about 400yds.  KN
Logged

Offline jlk

  • Trade Count: (0)
  • Member
  • *
  • Posts: 89
22-250 Load
« Reply #2 on: May 23, 2003, 08:47:08 AM »
:D My handload round is a Hornady case with a Hornady 52gr Match BTHP with 35.5 grains of AA2520 with a Fed. 210 primer. Flat shooting and a one holer.
Logged
One Well Placed Shot Is All It Takes

Offline RonF

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 418
22-250 Encore
« Reply #3 on: May 25, 2003, 01:29:48 AM »
Mine likes 55 gr. Nosler BTs and RL-15.  About 1/2" when I do my part, which is a bit less often these days than it used to be!

RonF
Logged

Offline Sean

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 135
22-250 Encore
« Reply #4 on: May 29, 2003, 07:20:25 AM »
My 24" barrel really likes the Winchester 45 gr load in the white 40 rd box. I tried quite a few bullet and powder combos and was never completely satisfied with the groups. I was at Wally World one day and decided to buy a box. Now I have one less rifle I have to reload for. Sean
Logged
Pages: [1]   Go Up
« previous next »