« previous next »
Pages: [1]   Go Down

Author Topic: Winchester 94AE Trapper  (Read 656 times)

0 Members and 1 Guest are viewing this topic.

Offline WD242

  • Trade Count: (0)
  • Member
  • *
  • Posts: 37
  • Gender: Male
Winchester 94AE Trapper
« on: May 09, 2007, 03:42:28 PM »
Recently bought a 94AE Trapper.(30-30). The stock is to short and needs to be made longer. Would I have to re-stock it or can I use some kind of slip on recoil pad. Any suggestions will be appreciated. Thanks.
Logged

Offline Mikey

  • GBO Supporter
  • Moderators
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Re: Winchester 94AE Trapper
« Reply #1 on: May 10, 2007, 01:57:22 AM »
If you need only an inch or so to extend the stock I would use a recoil pad.  You can install it yourself or have a gunsmith install it.  It should help a bunch.  Slip on pads are ok but not as nice as a good recooil pad.  If you feel you should have a new stock make certain to check the length of one on a Winchester 94AE Traditional Rifle to see if it is the same length - if so, save your $ and get a recoil pad installed.  HTH.  Mikey.
Logged
Pages: [1]   Go Up
« previous next »