« previous next »
Pages: [1]   Go Down

Author Topic: Load Data Needed  (Read 512 times)

0 Members and 1 Guest are viewing this topic.

Offline seagiant

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Load Data Needed
« on: July 24, 2007, 12:33:15 PM »
Hi,
    I have a 340 gr. NEI SSK bullet and a jug of H-4895 powder I'm trying to put together in a 444 Marlin super 14 pistol. Does anyone have any load data for this combination. The closest I can come to is data for a 300 gr. bullet. Thanks!
Logged

Offline offhand35

  • Trade Count: (74)
  • Contributor
  • ***
  • Posts: 433
  • Gender: Male
Re: Load Data Needed
« Reply #1 on: July 24, 2007, 03:11:53 PM »
I don't think any one wants to recommend a load that is not publicized, on this site. Maybe you should try calling NEI or SSK.
Logged
Squirrel.......the OTHER dark meat.....!

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Re: Load Data Needed
« Reply #2 on: July 24, 2007, 04:29:44 PM »
  Sea , did you happen to see the pictures of the .44 contender that was rechambered to .444? You are asking for a load for a heavy bullet in that caliber. I don't think I'd give out the load IF I had one.
Logged

Offline seagiant

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Re: Load Data Needed
« Reply #3 on: July 24, 2007, 05:21:33 PM »
Hi,
     ...Well, I appreciate everyones concern, but let us remember that J.D Jones of SSK has made 10 or so wildcat chamberings of different calibers all based on the 444 Marlin cartridge! All on the Contender platform! I have seen 44 mag. published data with a 350 gr. bullet but haven't seen anything on the 444 Marlin. Just thought I would get some pointers from someone that has been shooting this round in a Contender longer than I have! While maybe not the sharpest tool in the shed, I know to work up to a specific load a little at a time! Thanks again!
Logged

Offline blhof

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 738
Re: Load Data Needed
« Reply #4 on: July 24, 2007, 05:32:46 PM »
The problem people have is there have been frame stretching problems with 444's on the contender frame.  The wildcats are using smaller/lighter bullets in a necked cartridge.  The combination of heavy recoil and heavy bullet is usually what tests the limits of the contender and why TC made the G2 and the Encore.
Logged

Offline seagiant

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Re: Load Data Needed
« Reply #5 on: July 24, 2007, 06:23:03 PM »
Hi,
    OK, I can see the point but SSK also makes the Contender in 45/70! That cartridge utilizes bullets up to 500 grains! But like I said I can see the point of lighter bullets using the same case having less,force,recoil,pressure??? I personally will keep shooting the 444 marline in a super14 barrel. Thanks for the info!
Logged
Pages: [1]   Go Up
« previous next »