« previous next »
Pages: [1]   Go Down

Author Topic: Tension Barrel water cooled .223 PD gun?  (Read 691 times)

0 Members and 3 Guests are viewing this topic.

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Tension Barrel water cooled .223 PD gun?
« on: July 29, 2007, 11:59:14 AM »
I have a very nice cut rifled 1 in 15 twist 22 inch .224 barrel blank.  I was considering building a tension barrel water cooled PD rifle using the stubbing process with a coolant filled jacket over the barrel from in front of the chamber to the muzzel.  A little pump pushing Glycol through a coil in an Ice bucket should be able to fire as fast as you can load and never get it hot.  Would be kind of a purpose built rifle, high speed .223 40gr bullets as fast as you can shoot.  Could be fun?  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Tension Barrel water cooled .223 PD gun?
« Reply #1 on: July 29, 2007, 12:08:49 PM »
That would be something different!! :D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Tension Barrel water cooled .223 PD gun?
« Reply #2 on: July 29, 2007, 12:12:46 PM »
Well, we do like different here.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Tension Barrel water cooled .223 PD gun?
« Reply #3 on: July 29, 2007, 12:18:53 PM »
Actually, that would be really COOL!!!! ;D
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline DalesCarpentry

  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 6111
  • Gender: Male
  • I would rather be shooting!!
Re: Tension Barrel water cooled .223 PD gun?
« Reply #4 on: July 29, 2007, 01:48:31 PM »
Quote from: quickdtoo on July 29, 2007, 12:18:53 PM
Actually, that would be really COOL!!!! ;D
        Tim made a funny. LoL  8)
Logged
The quality of a mans life is in direct proportion to his commitment to excellence.

A bad day at the range is better than a good day at work!!

Offline BANG_OW

  • GBO Supporter
  • Trade Count: (11)
  • Contributor
  • *****
  • Posts: 266
  • Gender: Male
Re: Tension Barrel water cooled .223 PD gun?
« Reply #5 on: July 29, 2007, 04:47:20 PM »
John Browning would be proud.
Logged

Offline georgeld

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 239
  • Gender: Male
Re: Tension Barrel water cooled .223 PD gun?
« Reply #6 on: July 29, 2007, 07:00:48 PM »
Have you other guys noticed Trotter come's up with some

mighty OFF the WALL ideas??  The man has one hell of an imagination.

Sure wish I'd had one like that a few dozen times Larry.
Be sure to share the project and pictures with us.

I'll bet you could just seal a larger tube around it and fill that with coolant.  Maybe have an
adjustable seal, or caps/plugs to change fluid now and then.

A few yrs ago I read an article about someone made up a hose to blow CO2 thru the bore to cool
'em down.  Anyone on here try it, or know how it worked out??

I was concerned about the rapid chilling causing a warp in the tube so never tried it.
But, sure could easy enough with a flow meter.

Many a time on the p'dog fields I've got 'em too hot.  Gotta pay attention to it with a bolt, or semi auto.  Don't think I could heat up a NEF very fast.  OR can ya??
With a bolt gun on a long day I've burned up right near 600 rnds alone.  For yrs we lived among the p/d's but, only had 100 cases.  Start out loaded, and make a cold beer run to the house and load 'em up again when they were shot up.  Many a day I fired 400 doing that.  Got a lot of 98/100, but, never made a 100/100  for some reason. Guess what blew that score was trying the long shots and missing.

George
Logged
LM: NRA, NAHC, NAFC, NWTF
"Gun Control is NOT about guns,
It's about Control, join the NRA today!!"

Offline lik2hunt

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1629
  • Gender: Male
  • I want to acheive excellence, not perfection.
    • Authentic and Genuine
Re: Tension Barrel water cooled .223 PD gun?
« Reply #7 on: July 30, 2007, 01:56:58 AM »
Quote
Many a day I fired 400 doing that.  Got a lot of 98/100, but, never made a 100/100  for some reason. Guess what blew that score was trying the long shots and missing.

Or maybe it was this...................

Quote
Start out loaded, and make a cold beer run to the house and load 'em up again when they were shot up.


Logged
lik2hunt------>in OK





“The thing that separates the American Christian from every other person on earth is the fact that he would rather die on his feet, than live on his knees!"
George Washington…. also known as the Father of our Country

><> Galatians 2:20 <><

www.dsheriff.org

Offline mitchell

  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 2067
  • Gender: Male
Re: Tension Barrel water cooled .223 PD gun?
« Reply #8 on: August 03, 2007, 03:52:39 PM »
alright man i'll have to hand it to you that is something new but if you doon't mind me asking why not just buy one or if you really had that great of a p-dog spot two more guns and keep it simple???


like the saying goes K.I.S.S.   

keep it simple stupid
Logged
curiosity killed the cat , but i was lead suspect for a while

Offline bluebayou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1216
  • Gender: Male
Re: Tension Barrel water cooled .223 PD gun?
« Reply #9 on: August 03, 2007, 04:09:23 PM »
because it would be water cooled.............

"these amps go up to 11"
Logged
Pages: [1]   Go Up
« previous next »