« previous next »
Pages: [1]   Go Down

Author Topic: Encore Firing pin rebound spring  (Read 297 times)

0 Members and 1 Guest are viewing this topic.

Offline madbadger

  • Trade Count: (0)
  • Member
  • *
  • Posts: 40
Encore Firing pin rebound spring
« on: July 30, 2007, 03:23:42 AM »
I'm having some instances where the firing pin on my Encore fails to rebound.  I presume there is a spring in there that is either broken or too weak.  Right now, I've got the 45/410 barrel mounted.  It only sticks when I shoot 3" 410's, never when I shoot 2 3/4's.  Is this something I can replace myself with a stronger spring?

Thanks in advance,

MadBadger
Logged
Hold on, my friends, to the Constitution and to the Republic for which it stands. Miracles do not cluster, and what has happened once in 6000 years, may not happen again.

 -- Daniel Webster

Offline RonF

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 418
Re: Encore Firing pin rebound spring
« Reply #1 on: July 30, 2007, 07:55:49 AM »
In my experience, the regular spring works fine if everything is clean and it isn't broken.  It's very easy to remove the screw holding the breech plate in and remove it and the spring and firing pin.  Cock the hammer and you'll see the allen screw you need to remove.  If it is broken, call T/C and ask for one.

RonF
Logged

Offline madbadger

  • Trade Count: (0)
  • Member
  • *
  • Posts: 40
Re: Encore Firing pin rebound spring
« Reply #2 on: July 30, 2007, 08:55:13 AM »
Thanks, I wanted to make sure before I turned the screw and things started popping out.

MadBadger

Logged
Hold on, my friends, to the Constitution and to the Republic for which it stands. Miracles do not cluster, and what has happened once in 6000 years, may not happen again.

 -- Daniel Webster
Pages: [1]   Go Up
« previous next »