Author Topic: .45 LC  (Read 1535 times)

0 Members and 1 Guest are viewing this topic.

Offline Dixie Dude

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 4129
  • Gender: Male
.45 LC
« on: August 03, 2007, 07:32:57 AM »
Is the .45 LC using Buffalo Bore ammo or if you reload, adequate as a backup carry gun in Alaska?   

Offline John R.

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 845
Re: .45 LC
« Reply #1 on: August 03, 2007, 08:07:32 AM »
Yes,especially when using 320 gr. to 335 gr. bullets at around 1200 fps. :)

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: .45 LC
« Reply #2 on: August 03, 2007, 09:41:58 AM »
Just make sure the gun you have can take the Buffalo Bore ammo.
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Dixie Dude

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 4129
  • Gender: Male
Re: .45 LC
« Reply #3 on: August 03, 2007, 09:56:54 AM »
I read the Buffalo Bore notice, it said Ruger, S&W, and lever rifles only. 

Offline corbanzo

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2405
Re: .45 LC
« Reply #4 on: August 03, 2007, 11:02:41 AM »
Watch out for the S&W, their revolvers cannot keep up with ruger and lever rifles.  If the ammo says its ok, then it should be ok, but some manufacturers will load up to ruger only levels. 

I loaded up some 360 grainers in the LC, which were listed ruger only that are getting pretty close to the .454.  (Only three grains less powder on the max load)

For .45LC in Alaska, you just have to make sure they have the boom.   There are some 300grn cowboy loads out there that aren't loaded like they should be.  (Well, like they should be for bears)
"At least with a gun that big, if you miss and hit the rocks in front of him it'll stone him to death..."

Offline Travis Shuck

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: .45 LC
« Reply #5 on: August 03, 2007, 11:51:59 AM »
i would double check buffalo bore's notice for the 45 colt +p rounds. i am pretty sure they don't advocate using them in S&W
"seeing then that all these things shall be disolved, what manner of persons ought ye to be in all holy conversation and godliness." 2Peter 3:11

Offline fowler

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 128
Re: .45 LC
« Reply #6 on: August 03, 2007, 12:08:21 PM »
Heck any handgun in Alaska is a poor excuse for a rifle or slug gun but it sure beats the hell out of nothing. Besides you will be far more likely to have it with you instead of leaning up against a tree or in camp when you need it. Buffalo Bore is as good of a factory round as there is though. Pray you don't need it.

Offline kennisondan

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 739
Re: .45 LC
« Reply #7 on: August 03, 2007, 03:18:57 PM »
I would probably ask SandW as well, best to be sure, hate to hear a bear decided to leave you alone cause you got blown up and incinerated..
reallly do check it out, something slower but still heavy may be enough..
another option :  I shot some cor bons : 1300fps and 300gr jacketed flat nose..and they were rated only plus p.. the closest thilng to a bear was a 12 by 12 bridge timber.. it cruised through and killed a bear in the woods behind it ( ok lied about the bear... but it cruised that timber at an angle and slapped the embankment beyond with great authority.. )  it was impressive and I doubt it would take more to kill anything that breathes and bleeds .. JMHumble Opinion..
look at it too....
dk

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
Re: .45 LC
« Reply #8 on: August 05, 2007, 05:25:23 AM »
Read what John Linebaugh has to say about this caliber? He likes it even in S&W revolvers that some here are trying to elude are weak. I'm sure Buffalo Bore ammo is legally responsible for any advertising they have printed on their website or packaging. If in doubt, call them and ask specific questons.

http://www.customsixguns.com/writings/dissolving_the_myth.htm
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!

Offline Ken ONeill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1259
  • Gender: Male
Re: .45 LC
« Reply #9 on: August 05, 2007, 11:28:02 AM »
What does "...a back up carry gun in Alaska" mean to you ?

Offline Dixie Dude

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 4129
  • Gender: Male
Re: .45 LC
« Reply #10 on: August 05, 2007, 12:06:02 PM »
I would be carrying a rifle, side arm is for emergencies or finishing an animal off.

Offline Dusty Miller

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2271
  • Gender: Male
Re: .45 LC
« Reply #11 on: August 05, 2007, 05:02:40 PM »
I don't care where I am.  When the wheels start coming off its a big comfort to have a big bore hog leg on your hip.  At least you get a fight'n chance.
When seconds mean life or death, the police are only minutes away!

Offline Old Griz

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2030
  • Gender: Male
Re: .45 LC
« Reply #12 on: August 05, 2007, 05:48:23 PM »
The load Linebaugh likes and uses is not a +P load. Do not use the Buffalo Bore, CorBon, or other high pressure loads in a S&W. They note that you should only use them in Ruger, TC,  and Colt Anaconda handguns. S&W isn't on any of the lists. I wish it wasn't so. The only .45 Colt I have is a S&W, and I would love to be able to shoot the big loads in it. Evidently not all N-frames are the same.
Griz
<*}}}><

I Cor. 2.2 "For I determined not to know anything among you, save Jesus Christ, and him crucified."

Offline Ak.Hiker

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 389
Re: .45 LC
« Reply #13 on: August 05, 2007, 08:56:26 PM »
The Buffalo Bore 325 hard cast is rated for game up to 1000 pounds. It is getting close to a low end 454 and I sure would never want to ran any of these thru a Smith. The CorBon 300 grain load uses the tough Sierra bullet and is about as hot as the Buffalo Bore load. CorBon also loads a 335 grain cast at 1050 that some folks do carry in their Smiths but I would not load up anything that had more preasure than a 45 ACP +P for the Smith. If you are going to carry a handgun for bear protection in Alaska in my opinion the Buffalo Bore 325 45 Colt load would be a very good choice. I have carried the 300 grain CorBon as well as the Double Tap 255 grain Keith loads when woods walking. The 4 5/8 inch Ruger Blackhawk is much lighter on the hip that my 454 Super Redhawk. But for sheer power the 454 is a better choice if you can handle it and do not mind the extra weight. 

Offline swampthing

  • Trade Count: (6)
  • A Real Regular
  • ****
  • Posts: 517
Re: .45 LC
« Reply #14 on: August 06, 2007, 01:37:54 AM »
6.5-7.5" barrel?   300g WFN @ 1200-1300fps. You can achieve this with AA#9 or H4227 pressures will be below max sammi and it will kill pretty much anything especially if it is 100-150yds from you. This load will allow you to practice all day, reasonably speaking, so when and if the time comes you have got six holes in that beast before it realized that the first one killed it.
If your rifle need back-up it's time for a 45-70. 

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
Re: .45 LC
« Reply #15 on: August 07, 2007, 02:11:16 PM »
corbanzo,  but some manufacturers will load up to ruger only levels. 
What manufacturers?
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!