Author Topic: New LBT moulds at Discount Price (Read 2969 times)

Graybeard · « **on:** August 17, 2007, 05:14:48 AM »

Guys I'm gonna offer you a chance to get some NEW to your specification LBT moulds at discounted pricing. Veral and I have had an arrangement on his advertising here for some while now that gives him deeply discounted advertising prices and I've been taking moulds as payment. But I haven't cast a bullet in at least five years and just do not need anymore moulds.

So he and I have worked out an arrangement that will let me get some moulds to sell this year in payment for his advertising. His prices at this time are $125 for two cavity and $175 for 4 cavity moulds plus shipping. I will offer you a price of $100 and $150 or $25 off either. I need to sell enough at these prices to get $350-$400 and that's all I can offer at this discounted price per our agreement.

So what would you like? This offer is first come first served and when someone takes enough for me to clear the needed $350-$400 no more can be offered at discounted prices. You'll be able to have them made to your specs just as he always does and get brand new moulds shipped from him to you but you pay me due to the arrangement we've agreed to in order to cover his advertising this year.

jtaylor1960 · « **Reply #1 on:** August 19, 2007, 02:06:33 AM »

Put me in for a 45 at .453 nose to fit a Ruger bisley in a WFN at 300gr. 2-cavity plain base. I may take another mold if the deal is still on.Let me know the details.Jeff Taylor.

Graybeard · « **Reply #2 on:** August 19, 2007, 03:50:30 AM »

Send the money, in your case $100 if all you want is a two cavity to me at:

W. S. Graham
3015 Alabama Hwy. 204
Jacksonville, AL 36265-5506

Once I have your money I'll forward the info to Veral to make your mould and send it directly to you at your shipping address. If you want two moulds include the money for both and let me know which moulds you want. At this time you are the second to get in line so yes you can still get two moulds if you wish.

Once I have money in hand to equal about the $350-$400 Veral and I have agreed on for his banner this offer will be cancelled and you'll have to deal directly with him. I'm passing the savings along on a strictly first come first serve basis and only until I've gotten the money to pay for his advertising for this year.

GradyL41 · « **Reply #3 on:** August 19, 2007, 11:22:54 AM »

If the offer is still open I put in for one
.411/ 2 cavity
220 gr wfngc-up to 230gr but no more
iI use gator check gas check also have some Hornady
Veral recommended this on his forum,- would like to try Lynn

Graybeard · « **Reply #4 on:** August 19, 2007, 11:52:00 AM »

At this point in time I have no money from anyone on these moulds. I have had one inquiry where he sounded interested but has not gotten back to me to let me know if he is or is not going to send money so for now I'm not counting him as in even tho he was first to ask.

I have one other that seems as solid as you do saying he definitely wants one and maybe two but he has not yet gotten back to me to say if one or two and he is wanting a double cavity which is only $100 of the $400 worth I can sell at these prices.

As soon as enough folks commit firmly like you and the second guy have that they will take moulds to reach that level I will stop accepting orders and wait to be sure all the money flows in.

When I have your money in hand I'll notifiy Veral of what you want. I've not yet seen your post but will soon I'm sure. Send your money to me at:

W. S. Graham
3015 Alabama Hwy. 204
Jacksonville, AL 36265-5506

Price $100 per double or $150 per four cavity mould

FrankP · « **Reply #5 on:** August 20, 2007, 12:46:04 AM »

If the offer is still open I'm in for two molds; 44 in .430. @ 250 grs. and 45 in .452 @ 250 grs..Both should be WFNand PB .

Graybeard · « **Reply #6 on:** August 20, 2007, 06:52:20 AM »

Quote from: FrankP on August 20, 2007, 12:46:04 AM

If the offer is still open I'm in for two molds; 44 in .430. @ 250 grs. and 45 in .452 @ 250 grs..Both should be WFNand PB .

Yes Frank it is still open. I have three people with money on the way to me I believe so should be able to accept just one more order assuming you're looking for two cavity moulds. Is that what you're looking for? If four cavity moulds I think that would run beyond the deal Veral and I have and I'd need to verify with him it would be OK to accept. I think it would be and I could just adjust his paid up period to account for the extra income to me from the deal.

So let's talk either by phone at 256-435-1125 or by PM to work the specifics and then I can give you a final OK on it. If it's four cavity rather than two cavity moulds you're looking for tho I definitely need to get Veral's OK before I ask for your money as that will put me beyond the amount he and I have agreed to. Not a problem I don't think as I can adjust his next renewal date out further to account for it and I'm sure he'll OK that but do need to get his OK before hand not after the fact.

huntersmurf · « **Reply #7 on:** August 20, 2007, 09:06:09 AM »

Would we need to choose a mold from a list of currently avaiilble molds or can we order a mold of custom design?

I am in need of a mold for 54 cal muzzleloader at around 500-550 grains.

Graybeard · « **Reply #8 on:** August 20, 2007, 10:19:20 AM »

Quote from: huntersmurf on August 20, 2007, 09:06:09 AM

Would we need to choose a mold from a list of currently avaiilble molds or can we order a mold of custom design?

I am in need of a mold for 54 cal muzzleloader at around 500-550 grains.

If all who have committed in fact send their money the offer is already fully subscribed. In fact I will have to discuss #4 with Veral before agreeing to take his money and put him on the list. I'm just waiting to see if he wants 2 or 4 cavity before I do that.

So far we have:

1. Syncerus who wants: "Hi Bill,

I'd like a 512-600-LFN with gas check. That's a .512 diameter (for a .510 bore), 600 grain nominal weight, in the Long Flat Nose. My lube/sizer is an RCBS lube-a-matic 2."

2. GradyL41 who wants: "If the offer is still open I put in for one .411/ 2 cavity 220 gr wfngc-up to 230gr but no more iI use gator check gas check also have some Hornady
Veral recommended this on his forum,- would like to try Lynn"

3. jtaylor1960 who wants: "Put me in for a 45 at .453 nose to fit a Ruger bisley in a WFN at 300gr. 2-cavity plain base. I may take another mold if the deal is still on.Let me know the details.Jeff Taylor."

4. FrankP who wants: "If the offer is still open I'm in for two molds; 44 in .430. @ 250 grs. and 45 in .452 @ 250 grs..Both should be WFNand PB ."

If all these take them there will be NO MORE at the reduced prices.

FrankP I need to know from you if 2 or 4 cavity and then need to double check with Veral that I can still offer them as they do put me over the agreed to price but without them I'm a little under. I'm sure he'll agree but must verify in advance. I'll adjust his paid up period further outward due to the increase assuming he agrees.

But no more beyond these can be offered at this reduced price under the deal I have with Veral. Sorry folks perhaps next year when it's time to renew his advertising again.

GradyL41 · « **Reply #9 on:** August 21, 2007, 01:03:21 PM »

If If my money order went out yesterday at 2PM --so now it is when will the mold arrive? I am ready to start slinging some bullets any time

Graybeard · « **Reply #10 on:** August 23, 2007, 12:02:57 PM »

Frank and Lynn before I can forward your order to Veral I need to know what type lube-sizer you need top punch made to fit unless you don't want a top punch. I have the Postal MO in hand but need info for top punch. I have money from both of you but neither of you have told me what lube sizer to have top punches made for.

GradyL41 · « **Reply #11 on:** August 23, 2007, 12:48:00 PM »

Never thought about it -- the last mold I got from him he did not do that --anyway the answer is I have an old Lyman 450 thanks--glad you got the mo--Lynn

Graybeard · « **Reply #12 on:** August 27, 2007, 02:44:33 AM »

Veral has the info on all the moulds bought under this offer and said he'd try to get them right out. So in say two weeks if you've not gotten your mould let me or Veral know.

GradyL41 · « **Reply #13 on:** August 28, 2007, 03:46:16 AM »

thank you GB & veral 2

Graybeard · « **Reply #14 on:** September 10, 2007, 09:23:57 PM »

I've asked Veral for a status on the moulds he is making under this program to pay for his advertising. Here is his reply to me.

Quote

Hi Bill.
I got hit with a whole bunch of work outside the mold shop plus had to make a batch of parts, which always throws me behind, so I haven't cut molds for two weeks now. I'll be cutting molds tomorrow, and hopefully some will go tomorrow, and quite certain all orders in house will go by wen, which is quite a stack..
Veral

Based on this I assume that within ten days or so all should have their moulds. If you've not gotten them within that time frame please advise me so I can follow up with Veral on them for you.

Cayoot · « **Reply #15 on:** September 11, 2007, 03:55:26 AM »

So is this offer now closed?

Graybeard · « **Reply #16 on:** September 11, 2007, 11:52:23 AM »

That's correct. When enough was sold to cover the cost of his advertising here this year the offer ended. I think that took maybe two days. Now you'll need to contact Veral and buy them at full price.

Graybeard · « **Reply #17 on:** September 14, 2007, 12:03:36 AM »

Another update from Veral on the status of your moulds. I got this one overnight.

Quote

Hi Bill,
I cut all the molds yesterday, but haven't finished final detail and assembly yet, as was off getting care for my ill wife today. I can't see any reason at present why all won't go out tomorrow. I'm sorry about not getting them quicker, like I thought I could, but had no way of predicting the problems I was to face.
Veral

GradyL41 · « **Reply #18 on:** September 14, 2007, 02:56:03 AM »

thanks --hope his wife is better

Graybeard · « **Reply #19 on:** September 24, 2007, 06:05:54 PM »

I again asked Veral for an update on the status of this transaction and here is his reply to me via e-mail.

Quote

Hi Bill.
Yes they all shipped but not when I promised, or thought I would be able to. As I recall they went out about 3 days after I said they would. I would have emailed each but sent to only one who had written me wondering what the holdup was. It's this lady thing that slows me down, but I'm glad to put up with it long as necessary. Veral

Since his previous message to me was on Sep. 14 and said they would go next day and he says they in fact were perhaps three days later that means all should have shipped by 17/18 September and thus should I think arrive this week.

If anyone fails to get them this week please post here to let me know so Veral can follow up on the shipments for you.

GradyL41 · « **Reply #20 on:** September 25, 2007, 03:01:36 AM »

thanks for the info-- i will be on the look out //Lynn

jtaylor1960 · « **Reply #21 on:** September 25, 2007, 01:50:58 PM »

I got my mold from Veral today! I came home to find the boxes from UPS on the porch.I also ordered a hardness tester and a copy of Veral's book.I tested every cast bullet in the house. I can hardly wait to try the mold.When you look at an LBT mold you notice little features that make it just a little bit different ( and maybe better ) from the other brands. I got a 45-LFN- 300gr. for my Ruger Bisley .

GradyL41 · « **Reply #22 on:** September 27, 2007, 05:18:30 PM »

mold came all is good-- thanks GB/// and veral

Graybeard · « **Reply #23 on:** October 10, 2007, 05:51:45 AM »

Does everyone now have their moulds so I can drop this topic or is there anyone still waiting on it?

S.B. · « **Reply #24 on:** February 25, 2008, 04:01:21 PM »

Bill, is this a done deal, no more orders?

Graybeard · « **Reply #25 on:** February 26, 2008, 09:36:55 AM »

Quote from: S.B. on February 25, 2008, 04:01:21 PM

Bill, is this a done deal, no more orders?

That's correct. But it will probably open back up again this year when it's time for Veral to renew his advertising again. This post was started back in August of 2007 so likely along about that same time this year in 2008 I'll be making another post similar to this to help cover the cost of Veral's ads so he doesn't have to dig into his pocket for cash to pay.