Author Topic: Can the remington 700 SPS be changed to a DBM? (Read 1528 times)

DalesCarpentry · « **on:** August 30, 2007, 02:08:34 PM »

Can the SPS be changed over to a detachable box magazine. Instead of the floor plate. Dale

30-06man · « **Reply #1 on:** August 30, 2007, 02:37:56 PM »

um i know that you can buy a coneversion kit in cableas for like $40. if this is what you want just tell me ill find it again

Graybeard · « **Reply #2 on:** August 30, 2007, 05:51:15 PM »

AArrgh Dale please sell that nice Remington rifle to someone who will appreciate it and buy another handi.

LaOtto222 · « **Reply #3 on:** August 31, 2007, 01:00:16 AM »

Dale - Why mess with a good thing? You are getting 3/4" groups at 300 yards. By changing it over to a box magazine, the delicate and important bedding of the stock may change and mess with your accuracy. Leave it alone, it don't get much better than that 3/4" @ 300 yards. If you want to mess around with stuff, get into hand loading and try different loads.

sniperVLS · « **Reply #4 on:** August 31, 2007, 01:09:12 AM »

3/4" groups @ 300? Some would die to get that at 100 let alone 3! If you fiddle around and mess it up, you'll have everyone on here saying we told ya so!

** Bill, I like the Mod avatars, Thanks

hellacatcher · « **Reply #5 on:** August 31, 2007, 01:31:20 AM »

If I didn't already have one like it I would try to buy it off of you. Don't mess it up. If you just have to tinker with one go and buy a old beet up handie to fill your time with. Most people don't like a detachable mag on one I know I wouldn't.

ms · « **Reply #6 on:** August 31, 2007, 01:43:26 AM »

Dale trust GRAYBEARD ON THIS ONE.

Edited. Graybeard

pacer97 · « **Reply #7 on:** August 31, 2007, 04:32:51 AM »

Dale if your SPS is the matt black it can be got with the DBM in alot of cal's . So now you need someone to buy yours and you get a sps DBM it may shoot not as good or maybe as good as yours. As for likeing the DBM I have a 97 Rem 260 BDL SS DBM and love it and it shoots.

Alan

DalesCarpentry · « **Reply #8 on:** August 31, 2007, 04:45:58 AM »

Quote from: ms on August 31, 2007, 01:43:26 AM

Dale trust GRAYBEARD ON THIS ONE.

MS I asked a simple question that I did not know the answer to. I hunt alot of fields and find it a pain in the ass to have to unload my rifle to ride a mile down the road. I just thought if it was possible that it would be easier to pop a clip out. I do not aprecate your comments for asking something I did not know. I had no idea it could affect the accuracy and This rifle is a keeper. I have no plans to ever get rid of it. There are poeple that spend $1,0000"S of dollars to get a rifle that shoots this good and I realize that. I would have never saved that target and walked all that way to get it if it weren't true. I wish I had a camera that worked so I could show you guy's the target. Dale

Edited by Graybeard.

DalesCarpentry · « **Reply #9 on:** August 31, 2007, 04:50:51 AM »

Quote from: sniperVLS on August 31, 2007, 01:09:12 AM

3/4" groups @ 300? Some would die to get that at 100 let alone 3! If you fiddle around and mess it up, you'll have everyone on here saying we told ya so!

** Bill, I like the Mod avatars, Thanks

I like them also. Thanks Dale

Graybeard · « **Reply #10 on:** August 31, 2007, 04:52:30 AM »

Push the button inside the trigger guard bow and drop the magazine floor plate to dump the rounds into your hand. Takes no more time than removing a clip.

DalesCarpentry · « **Reply #11 on:** August 31, 2007, 04:59:23 AM »

I should reword that. It is a pain in the ass to keep reloading it.

Graybeard · « **Reply #12 on:** August 31, 2007, 05:26:13 AM »

Unless you're worried about being charged and eaten by a mad ground hog just load one round you're not planning to miss are you?

DalesCarpentry · « **Reply #13 on:** August 31, 2007, 06:29:45 AM »

GB now that's funny.

After all this I think I will just leave well enough alone besides changing the weight of pull on the trigger. I have decided to take it to my gun smith for that. I kind of guess I am used to toying around with things from my Handi past. Dale

DalesCarpentry · « **Reply #14 on:** August 31, 2007, 06:51:34 AM »

I will say this though. The next time I get the time to go to the range. I will shoot some more groups at 300 yards because this was at the end of the session and I ran out of ammo. I want to be sure this was not a fluke. Like I said I have a hard time believing myself that this rifle shoots this good. Dale

NONYA · « **Reply #15 on:** August 31, 2007, 11:08:00 AM »

so was it a one shot group at 300?

Graybeard · « **Reply #16 on:** August 31, 2007, 11:14:25 AM »

No he stated it was for three shots. But my best ever group was a one shot group when I ran outta bullets and had no more to shoot.

30-06man · « **Reply #17 on:** August 31, 2007, 11:48:59 AM »

lol. i been wanting a long range gun and have posted topics on some here but don't have a use for one. his remington does group well though

LaOtto222 · « **Reply #18 on:** August 31, 2007, 12:22:48 PM »

Dale - Why don't you get a single load tray for your SPS? You just drop it in the magazine well and close the magazine door. You have an instant single shot. Just jack out the loaded cartridge, put it in your shirt pocket and pop it back in when you get to your new location. I have a cartridge carrier on my butt stock to carry more rounds with and they are handy to get to.

NONYA · « **Reply #19 on:** August 31, 2007, 07:13:35 PM »

I have the DM on my bdl,i love it,if there is a conversion available go for it,i doubt it will reduce the accuracy of the rifle.I keep 2 steel clips loaded with my hunting loads and one plastic clip loaded with lighter solids for fur friendly situations like bobcat or fox,talk abount convenient!

BattleRifleG3 · « **Reply #20 on:** September 25, 2007, 03:57:50 PM »

I don't believe the detachable mag conversion will hinder accuracy. If it's the Kwik-Clip conversion, it may help ever so slightly because the Kwik-Clip feesd the rounds in the center, in essence a double to single stack.

The downside is that you can no longer load your rifle without removing the magazine and loading it separately. The BDL-DM, Mossberg 4x4, and older Savage C models are the only domestic bolt actions whose detachable mags can also be fed while inside the rifle.

The good side - the Kwik-Clip conversion can be removed from your 700 and the original mag restored so that the rifle is just as it was before, with no penalty for having tried something new.

30-06man · « **Reply #21 on:** September 25, 2007, 04:07:17 PM »

still messing with the stock screws will change the accuracy