35Rem and 3031

[Aardvark]

Who has an accurate load for 200gr RN with 3031 0r 4064 (both IMR) in a 20" barrel .
I have an old 336SC with Ballard groove barrel.
Caliber 35Rem.

[victorcharlie]

I seldom send anyone to another site for information but in this case I think you might like to read some of 35remington's post on marlinowners.

http://www.marlinowners.com/board/viewtopic.php?t=22893

http://www.marlinowners.com/board/viewtopic.php?t=5522&highlight=

http://www.marlinowners.com/board/viewtopic.php?t=7180&highlight=

The classic 35 remington load is the top load listed on Hogdon's website which is 37.5 grains of 3031 under a 200 grain remington.

I load this load, but as it's a max load please take the necessary precautions and work up.

[Aardvark]

 Thanks for the tip..As I own 3 Marlin levers---30-30, 35, and 45-70, it will be beneficial tobe part of that forum as well.

[tutti confuso]

Aardvark ... nothing really special, i have loaded up  a 100+rnds,  200 gr rem.corelocks w/ IMR 4064 an 9-1/2 rem. prime, rem casesr for my 336 marlin 20" figured they last a life time,..  an throw the key away that how well they worked in my marlin .. very accurate an the deer just drop,  no chasing them   i'll have to dig you out the powder charge don't have it off hand,.. i'll either edit this or just post it below

 
 

[tutti confuso]

Aardvark ,... Ok  found my 35's.. last time i loaded was 1987 out of 125 rounds still have 85 left.. have both hornady 200gr round nose an rem.corelock loaded with 38.9grs /4064 rem 9-1/2 primer in rem case / oal 2.527
 in my notes i see i once loaded 36.0/3031 with a fairly lite crimp
 hope this helps out some..