« previous next »
Pages: [1]   Go Down

Author Topic: Ruger M77 Mk2 question  (Read 1070 times)

0 Members and 1 Guest are viewing this topic.

Offline 223 handi

  • Trade Count: (2)
  • Member
  • *
  • Posts: 27
Ruger M77 Mk2 question
« on: September 01, 2007, 10:07:25 PM »
Am wanting to paint the synthetic stock.  Walk me through taking the stock off.Thanks for the help!!
Logged
It's better to have it and not need it, than need it and not have it.

Offline BlkHawk73

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1501
  • Gender: Male
Re: Ruger M77 Mk2 question
« Reply #1 on: September 02, 2007, 02:43:22 AM »
  Read the manual.  If you don't have one, you should.  Call Ruger and they'll send you one. 

  For now,download the manual from Ruger's site.
Logged
"Never Surrender, Just Carry On."  - G.S.

Offline Hairtrigger

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 2010
Re: Ruger M77 Mk2 question
« Reply #2 on: September 02, 2007, 12:14:04 PM »
Turn the rifle upside down.
Open the floor plate.
Remove 3 screws, one at the front of the floor plate, one in front of the trigger guard, the last behind the trigger guard
That should be all there is to it
Logged

Offline 30-06man

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2604
Re: Ruger M77 Mk2 question
« Reply #3 on: September 03, 2007, 11:53:02 AM »
yes that is it. when you put them back on be sure to put the amount of torque as suggested, also consider haveing the barrel floated
Logged
The sportsman lives his life vicariously. For he secretly yearns to have lived before, in a simpler time. A time when his love for the land, water, fish and wildlife would be more than just part of his life. It would be his state of mind

Rick

Offline Hairtrigger

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 2010
Re: Ruger M77 Mk2 question
« Reply #4 on: September 03, 2007, 12:37:01 PM »
When I reassemble I snug the front, snug the rear snug the middle then torque the front to (I think) 45 ft lbs
Logged

Offline gt40

  • Trade Count: (0)
  • Member
  • *
  • Posts: 28
Re: Ruger M77 Mk2 question
« Reply #5 on: September 24, 2007, 06:02:08 AM »
Be careful it might be 45 inch pounds.????
Logged

Offline Hairtrigger

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 2010
Re: Ruger M77 Mk2 question
« Reply #6 on: September 24, 2007, 07:05:53 AM »
Quote from: gt40 on September 24, 2007, 06:02:08 AM
Be careful it might be 45 inch pounds.????


Good catch
You just may have saved a broken screw
Logged

Offline SingleShotShorty

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 327
  • Gender: Female
Re: Ruger M77 Mk2 question
« Reply #7 on: September 27, 2007, 09:41:47 AM »
the front screw is what tightens the action's recoil lug. Just fyi Info
Logged
Old Age and Treachery Will Alway's Overcome
Youth and Skill.
Pages: [1]   Go Up
« previous next »