I started with Lee push through sizers, then bought an RCBS, finally bought a Star. I wish I would have started with the Star. It is so easy to use, incredibly fast, and a real pleasure to work with. I size and lube mostly pistol bullets, but have found the Star works very well to crimp on gas checks on my RCBS 200 grain bullets for the 35 Whelen. Bevel base bullets are no problem on the Star.
Buy an original San Diego Star if you can find one on Ebay. Otherwise buy the Magma Star from Magma Engineering. Star sizing dies show up on Ebay fairly frequently for about $18 to $35. Stillwell Tool and Die in Texas can hone them to a larger size (They can be increased as much as 25 thousands of an inch).
BTW, In my opinion, you should use soft lubes for which the Star was originally designed for. Avoid the heaters with hard lube. You may have to put a light bulb next to the Star if the air temperature is below 60 degrees. Pretty much the same as with RCBS or Lyman regarding temperture.
Jon