« previous next »
Pages: [1]   Go Down

Author Topic: Who can re-bore a .22 Hornet to 25/35?  (Read 1123 times)

0 Members and 1 Guest are viewing this topic.

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Who can re-bore a .22 Hornet to 25/35?
« on: September 30, 2007, 06:13:38 AM »
I recently acquired an old Savage M219 singleshot in .22 K Hornet.  Unfortunatly the bore is pretty ratty and I can't get groups better than about 2 MOA,  that would be fine for a 30/30 but not a small varmint rifle so I'm thinking of getting it re-bored and chambered for 25/35. Can anyone suggest who might do this work and about what it may cost?  Thanks in advance! ;D
Logged
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.

Offline Rangr44

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 2158
Re: Who can re-bore a .22 Hornet to 25/35?
« Reply #1 on: September 30, 2007, 12:39:33 PM »
If it were me, I would give Norman Johnson a shout.

High Plains Re-Boring and Re-Rifling
Turtle Lake, ND

(701) 448-9188

nrjonsn@westriv.com
Logged
There's a Place for All God's Creatures - Right Next to the Potatoes & Gravy ! !

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Who can re-bore a .22 Hornet to 25/35?
« Reply #2 on: September 30, 2007, 04:52:46 PM »
It may be hard to do if the barrel was button rifled.  there isn't much metal to take out going to .25, so there ends up being hard spots where the origional metal was compressed by the button.  You may think about a liner, it is easy with the low pressure Hornet I would think. 

http://www.trackofthewolf.com/(S(vgo0nx45rnqflb45klgq5i45))/categories/tableList.aspx?catId=14&subId=142&styleId=483&PageSize=25&Page=1

Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Who can re-bore a .22 Hornet to 25/35?
« Reply #3 on: September 30, 2007, 05:12:58 PM »
Ol' Marv(Datil) had a 223 Superlight H&R rebored and rechambered to 25-35 by Wayne York, Marv loves it, has wanted one since he was a young fella. ;)

Tim

http://home.earthlink.net/~oregunsmithing/index.html
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Boxhead

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 264
Re: Who can re-bore a .22 Hornet to 25/35?
« Reply #4 on: October 01, 2007, 12:43:33 PM »
I have three rebores that were done by Cliff LaBounty and they are very fine shooters. Cliff retired and sold his business to and trained Jim Dubell.

HTTP://www.deltagunshop.com/Clearwater/CW_FAQ.html
Logged

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Re: Who can re-bore a .22 Hornet to 25/35?
« Reply #5 on: October 02, 2007, 07:28:00 AM »
Many thanks for all the replies! I guess I'm still in the "mulling-it-over" stage but if I do get this done I will be sure to post results here.
Logged
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.
Pages: [1]   Go Up
« previous next »