« previous next »
Pages: [1]   Go Down

Author Topic: which scopes mounts and rings hold up to big recoil..  (Read 1062 times)

0 Members and 1 Guest are viewing this topic.

Offline kennisondan

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 739
which scopes mounts and rings hold up to big recoil..
« on: October 22, 2007, 12:13:44 PM »
Which  >>
 1. scopes
 2. mounts and
 3. rings
>>hold up to heavy recoil... 460 and 358.
 I hear my little 308 is not enough recoil to worry about.. by comparison.

also : does the same answer hold true if it is ported ?
on rings and mounts : I hear about tsob, warne, but need more information.. and as many choices as possible..
on scopes I hear about leupold, and and sometimes burris..

also : what about the red dot sights on hard recoiling handguns... ? those with 2 minute dots seem about right for accuracy.

thanks to all
dan kennison
Logged

Offline tiggere

  • Trade Count: (1)
  • Member
  • *
  • Posts: 44
Re: which scopes mounts and rings hold up to big recoil..
« Reply #1 on: October 22, 2007, 03:13:32 PM »
I would tend to lean towards any major brand name with three rings...Warne, T'SOB, EABCO, MGM...all make excellent mounts and rings...but I do like the idea of three rings for the support...as for the 308...you can get away with two rings if you want...

Red dots have held up really well for me over the years...I have an UltraDot with a 1 MOA dot and several Bushnell Trophy's...they have held up to a 7.62x54R Mosin Nagant, a 44 Mag Super Blackhawk, and a 12 gauge shooting 3 1/2" turkey loads...I'll let you know how well it handles the 375 JDJ this weekend...
Logged

Offline kennisondan

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 739
Re: which scopes mounts and rings hold up to big recoil..
« Reply #2 on: October 22, 2007, 04:43:32 PM »
I am really anxious to know how it works with that JDJ.
Glad to know it is not just the ultradot that has given good service on recoiling guns... the prices are far superior to scopes.. I was not aware of the different rings and mounts available... thanks..
any body else ?
dk
Logged

Offline kennisondan

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 739
Re: which scopes mounts and rings hold up to big recoil..
« Reply #3 on: October 22, 2007, 04:44:40 PM »
can three rings fit on the red dots ? is there room for them.. ?
dk
Logged

Offline banjoman

  • Trade Count: (37)
  • Contributor
  • ***
  • Posts: 447
  • Gender: Male
Re: which scopes mounts and rings hold up to big recoil..
« Reply #4 on: October 25, 2007, 06:04:23 AM »
I have had really good luck with the Weaver Quad Lock rings on my tc's have not had a scope move yet
Logged
Hunt with your Kids not For Them

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: which scopes mounts and rings hold up to big recoil..
« Reply #5 on: October 25, 2007, 07:49:13 AM »
As for scopes:

1.  T/C makes (or rather sells) 1-4X, 2-7X and 3-9X "recoil proof" scopes.  I broke 2 of the 1-4X models on a 460 & 500 S&W (both replaced free by T/C).  I haven't broken either of the other 2 yet but I also haven't subjected them to such severe recoil.

2.  I broke a Bushnell Trophy 2-6X scope on my 460 S&W.  They didn't honor their warranty saying it had been "abused."

3.  I've used Leupold scopes on a 50 AE, a 460 S&W, a 500 S&W and a 7mm/08 and haven't broken any yet.

4.  Burris scopes have a good reputation but I've never tried one of their handgun versions.

As far as mounting handgun scopes is concerned, I had real problems keeping them in place on the 460 & 500 S&W.  I sent both barrels in to SSK Industries for the 6 screw 4 ring T'SOB base.  They even mounted the scopes for me.  I had never been able to get the 500 S&W to do better than 2 or 3 inch 100 yard groups.  Lo and behold, using Sierra 400 gr. Sports Master bullets with the T'SOB base/rings and a Leupold 2.5-8X VX III scope, the gun would do 1 to 1.5 inch 100 yard groups.  For the heavy kickers, I don't plan on using anything but the T'SOB base in the future.
Logged

Offline 30-06man

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2604
Re: which scopes mounts and rings hold up to big recoil..
« Reply #6 on: October 25, 2007, 01:54:21 PM »
where are the t/c scopes made and are they any good. also look into leupold rings haven't had any problems with them and i have used the for years
Logged
The sportsman lives his life vicariously. For he secretly yearns to have lived before, in a simpler time. A time when his love for the land, water, fish and wildlife would be more than just part of his life. It would be his state of mind

Rick

Offline 7-30 Waters

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 204
Re: which scopes mounts and rings hold up to big recoil..
« Reply #7 on: October 25, 2007, 03:10:58 PM »
Burris Signature "Z" rings with a Weaver base.
Logged

Offline kennisondan

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 739
Re: which scopes mounts and rings hold up to big recoil..
« Reply #8 on: October 25, 2007, 03:33:47 PM »
update: I now will have leupolds for the heaviest kicking pistols,( 460, 358Win, 308  ) and putting a 3x TC on a lighter recoiling unit ( a 223 ) .....  I am going to see what bases and rings I have then will go to a stronger base and rings as needed.... will probably go to the specialty rings and mounts but could try three rings on long one peice weaver type bases first if I have all that I need to try it for free... I will lap the rings, nail polish the screws, put a little electrical tape on the inside of the rings or something like that... I forget what other steps may secure the scope but will do a search.. I assume the most critical ones are the 460 and 358 then the 308 in that order....
it may be I just need to get three tsob bases, etc. right out of the box.. .will probably not be able to shoot the things for a while, now anyway.. so the money at the moment of their arrival will not matter ( kinda good and kinda bad. )
I was surprised that no one suggested the tactical type rings that are buillt so sturdily... wonder about that.. they fit the weaver style bases, and look solid for sure.....but I am asking for advice and just wondering that's all.
dk

Logged

Offline doc-and

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 438
Re: which scopes mounts and rings hold up to big recoil..
« Reply #9 on: October 25, 2007, 11:55:45 PM »
Not sure but have you tried to find a Redfield 3 ring base.  I've used them for years, just use a piece of friction tape in the rings and the scopes not going anywhere. 

Redfield 3 ring base & rings



Or you could do like this guy did and........


docand 8)
Logged

Offline HL

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 404
Re: which scopes mounts and rings hold up to big recoil..
« Reply #10 on: October 26, 2007, 01:57:00 AM »
If your barrel is tapped for 6 holes, use the Weaver Base with Burris Z rings.

I have this on all my barrels, including the 375JDJ and have never had a problem with any movement.
Logged

Offline Selmer

  • Trade Count: (6)
  • A Real Regular
  • ****
  • Posts: 684
Re: which scopes mounts and rings hold up to big recoil..
« Reply #11 on: October 26, 2007, 09:30:03 AM »
I've used the Redfield three ring base and rings for 6 years on my .454 Casull with no problems.  I do make sure that I back the scope up to the turret as a mechanical stop and it has not marked or damaged a scope yet.  I had a Leupold 4x scope on it for 6 years and just bought a used Burris 2.5-7x for it.  The Leupold was great and I sighted it in...once in 6 years!  The Burris has been very good for me so far, although it's a much heavier and longer scope.
Selmer
Logged
"Next to the glory of God, music deserves the highest praise"-Martin Luther
Any homo sapien with the proper chromosomes can be labeled a father, but it takes a man to be called "Daddy"-unknown

Offline muffindrvr

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 102
Re: which scopes mounts and rings hold up to big recoil..
« Reply #12 on: October 27, 2007, 04:40:48 AM »
warne maxima base and rings theyr on both of my 375 jdj pistol and rifle barrels
Logged

Offline jamie

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 332
Re: which scopes mounts and rings hold up to big recoil..
« Reply #13 on: October 28, 2007, 03:41:46 AM »
The Burris Signature Zee rings are the way to go.  Unbelievable grip and won't scratch your scope.
Logged
AMMO...
LiFe, Liberty and the Pursuit of all those that threaten it!

Offline Tom W.

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1294
  • Gender: Male
  • Warning... Does not play well with others!
Re: which scopes mounts and rings hold up to big recoil..
« Reply #14 on: October 28, 2007, 09:13:00 AM »
I've used both the T/C Duo ring base With a Leupold M8 2x scope  and the Burris Signature dual dovetail rings and bases with a Burris 2 x7 Posi lock on my 30/06 handgun. Both held up well, but the Burris scope won't fit the T/C Duo ring without modification. I believe the '06 is plenty enough recoil, thank you.
Logged
Tom
Alabama Hunter and firearms safety instructor

I really like my handguns!

Offline 454-hunter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 75
Re: which scopes mounts and rings hold up to big recoil..
« Reply #15 on: December 06, 2007, 05:21:25 PM »
WITHOUT ANY RESERVATION I WILL TELL YOU THAT THE T'SOB BY SSK INDUSTRIES IN WINTERVILLE OHIO IS FAR AND BEYOND THE TOUGHEST THREE RING SCOPE MOUNTING SYSTEM i HAVE EVERSEEN OR USED WILL HOLD UP TOO ANY CALIBER.Just log on to the website at www.sskindustries.com  you can even personally e-mail J.D. Jones personally he will usually e-mail you back with a short conscise answer in about 3 days to a week .
454-hunter
Logged

Offline kennisondan

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 739
Re: which scopes mounts and rings hold up to big recoil..
« Reply #16 on: December 06, 2007, 06:28:21 PM »
I keep hearing the tsob is the monster..
dk
Logged
Pages: [1]   Go Up
« previous next »