Author Topic: Why don't they make? guns you would like to see made (Read 9624 times)

Old Griz · « **Reply #30 on:** June 15, 2008, 02:01:44 PM »

Ruger #1 in 6.5x55 Swede, .260, or even 7mm-08.
K or L frame .44 Special.
Vaquaro in .44 Special.
S&W without the &@%* lock.

no guns here · « **Reply #31 on:** June 25, 2008, 06:25:49 AM »

I'd like to see a switch caliber straight pull like the Blaser R93 that goes for under $1000.
I'd really like to see an affordable double rifle ($1500 or less) that didn't look like it was whittled by a cub scout...
It would be nice to have more access to some euro style rifles... I really dig that bavarian stock and mannlicher style forend. Guess that's why I'm getting the CZ, but I wish it were American made...
I too wish that the major manufacturer would solicit ideas like this, then they could put up a poll and we could all vote. Highest vote getter would be produced.
I wish American car manufacturers would do the same thing. Then maybe we could get some light duty diesel pickups and some high-mpg diesel cars like that have here in Europe...

ngh

Dixie Dude · « **Reply #32 on:** June 25, 2008, 06:33:21 AM »

I would also like to see a lever action rifle similar to Brownings with a steel receiver and control round feed like the Mauser action, but in a fast handling lever.

SLAVAGE · « **Reply #33 on:** June 25, 2008, 07:22:52 AM »

all i would ask for is a transfer bar conversion on a FA 83 like they have on ther 97's and the rugers

no guns here · « **Reply #34 on:** June 25, 2008, 11:05:00 PM »

Just a note... RUGER has a link on their website to submit ideas directly to their CEO. Check it out... I already put in my wishes...

ngh

BlkHawk73 · « **Reply #35 on:** June 26, 2008, 02:24:46 PM »

Quote from: Old Griz on June 15, 2008, 02:01:44 PM

Ruger #1 in 6.5x55 Swede, .260, or even 7mm-08.

Vaquaro in .44 Special.

The #1 was chambered in 7-08 a while back but not many were produced. A special run of the 6.5x55 #1's was made last year for Lipsey's who will have KRSI-M77 in that chambering later this year.

Any .44 special Ruger won't be on the vaquero frame now that it's been replaced with the New vaquero. However, all nes is not bad. I'm heard on more than one occasion...I also know at least two sources have such a model on thier "noteworthy" list for a distributor edition.

Nessmuk#1 · « **Reply #36 on:** July 16, 2008, 04:08:27 AM »

A remake of the 'Webley?" Auto revolver. When fired it revolved the cylinder and cocked the hammer. Never seen one.
The Sportsman 999 or another breakaction 22.

buck460XVR · « **Reply #37 on:** July 16, 2008, 12:44:08 PM »

a Winchester or Marlin lever carbine chambered in .460 S&W.

no guns here · « **Reply #38 on:** July 21, 2008, 09:30:44 PM »

Ya' know what else I'd like to see? Just for s's and g's I'd like to see a revolving carbine that would handle a heavy pistol/light rifle round. I would love to see a DA revolving carbine in .45 Colt. If it had the standard swing out cylinder, it would be great for fairly rapid shooting and reloading with some speed-loaders... just keep it minute of deer accurate... I'd like to see it on a SRH strength action too...

ngh

2111 · « **Reply #39 on:** July 28, 2008, 08:53:57 AM »

A top break Lemat style revolver in .22 LR with a .45 long colt/.410 barrel 3" long. I think it would be a nice tackel box gun.

no guns here · « **Reply #40 on:** August 04, 2008, 04:00:00 AM »

yeah too bad... that would be really cool! If you could make it minute of squirrel accurate it would be just about the handiest thing out there... man, I'd have to buy one just for the cool factor...

ngh

SharonAnne · « **Reply #41 on:** August 14, 2008, 11:28:19 PM »

GS44, the 9x23 carbine/pistol combo would be TOO cool. I have an IPSC open division Para Ordnance in 9x23. I regularly shoot it off a bench at a 6" steel circle at 100 yd, getting about 7-8 out of 10 hits. It is amazingly accurate. I have considered a CCU (Carbine Conversion Unit) with a Para frame and the CCU upper. I would shorten the barrel to 16.25" and flute the barrel. The darn things are heavy. An M1 carbine-like version would be awesome!

coyotejoe · « **Reply #42 on:** August 16, 2008, 03:50:00 AM »

The reason they don't make what you want is simple, they don't CARE what you want. That is the modern corporate mentality. Produce what everyone else is producing but find an overseas manufacturer to produce it cheaper and hire a marketing firm to hype it up and convince you that it IS what you want. This is the "information age", if manufacturers cared at all what you want they would ask that question on their websites. Do any of them request "user feedback"? No, in fact the Ruger website is messed up and I can't even find a way to tell them their website doesn't work! They clearly don't want to hear from me.

jumpsteady · « **Reply #43 on:** August 27, 2008, 03:38:20 AM »

Just bring back the Dan Wesson revolvers. Interchangable barrels, ported and non-ported, full underlug and standard shrouds, and fixed and adjustable sights. And make it affordable for the common working guy can afford one

45-70.gov · « **Reply #44 on:** October 07, 2008, 08:59:07 AM »

HOWDA PISTOL in stainless and 45-70 or any big modern caliber 500smith etc with good sights and maybe a single trigger

t-reg · « **Reply #45 on:** October 24, 2008, 07:44:35 AM »

GP-100 .44 special - I couldn't get one fast enough.
SP-101 .22LR and .357 with 4" barrel, adj sights
Taurus small frame .357 with 4" barrel, adj sights

SharonAnne · « **Reply #46 on:** October 24, 2008, 10:00:15 AM »

Isn't the 500 S&W already a HOWDA pistol??

You know why hunters carried the Howda pistol? In case a tiger leaped up on the elephant they were riding.
It came from the hunters yelling " HOWDA heck did that thing get up here?"

45-70.gov · « **Reply #47 on:** October 25, 2008, 06:13:31 PM »

as is it would make a good howdah revolver

but i want a double

i found 3....they are sold

$10 thousand EACH

so let me add make one at a reasonable price

the howdah is the cockpit you drive the elephant from

but ''howdah you get into it

SharonAnne · « **Reply #48 on:** October 25, 2008, 07:21:01 PM »

yes the howdah is the thingie you ride in on the elephant. but i like my explanation better.

chucky52 · « **Reply #49 on:** October 25, 2008, 07:29:00 PM »

Simple, because they want to make the most money for the least investment possible, the easiest way possoble and not compete with another product directly.

Rex B · « **Reply #50 on:** November 28, 2008, 08:24:39 AM »

I'd like a DA revolver slightly larger than a NAA Black Widow, perhaps in .32 mag, with a trigger guard, in stainless.
I like my NAA revolvers, but I want a little more than .22 mag.

ZZTOP · « **Reply #51 on:** January 06, 2009, 04:17:59 PM »

Hello all,
I'd like to find out who "they" are so I can ask the right 'they'!

I'd like to have a GP-100 with an eight or ten inch barrel or have one fixed to accept a Dan Wesson barrel.

Happy shooting
ZZTOP

Cheesehead · « **Reply #52 on:** January 06, 2009, 05:54:18 PM »

I would like to see a 5 shot Model 29 in 500 Special with a 5 inch barrel.

Cheese

jumpsteady · « **Reply #53 on:** January 07, 2009, 04:55:05 AM »

Quote from: ZZTOP on January 06, 2009, 04:17:59 PM

Hello all,

I'd like to have a GP-100 with an eight or ten inch barrel or have one fixed to accept a Dan Wesson barrel.

Happy shooting
ZZTOP

I would like to see the Super Redhawk and Super Blackhawk go to Dan Wesson style Barrels. I would uses all of my lifetimes savings buying them.

45-70.gov · « **Reply #54 on:** January 07, 2009, 06:45:16 AM »

Quote from: Cheesehead on January 06, 2009, 05:54:18 PM

I would like to see a 5 shot Model 29 in 500 Special with a 5 inch barrel.

Cheese

thats the one
i want

gunpilot · « **Reply #55 on:** November 16, 2012, 03:14:26 PM »

How about a S&W TRUE medium frame revolver? The J frame is quite small and the K frame is actuality extremely large.

t-reg · « **Reply #56 on:** November 16, 2012, 03:41:12 PM »

I'd like to see a 5" version of the Ruger SR9 /40 /(45?) pistols.

t-reg · « **Reply #57 on:** November 16, 2012, 03:52:20 PM »

Quote from: t-reg on October 24, 2008, 07:44:35 AM

GP-100 .44 special - I couldn't get one fast enough.
SP-101 .22LR and .357 with 4" barrel, adj sights
Taurus small frame .357 with 4" barrel, adj sights

Hey look, they listened to me!

Couger · « **Reply #58 on:** April 21, 2013, 07:04:20 AM »

Quote from: Rex B

I'd like a DA revolver slightly larger than a NAA Black Widow, perhaps in .32 mag, with a trigger guard, in stainless.
I like my NAA revolvers, but I want a little more than .22 mag.

Understand about using the NAA 5-shooters as a model for a .32Mag / .327Mag sub-J Frame size revolver! (that would indeed be neat!)

I wish NAA would come out with a 6inch version of their Mini-Master, or even a slightly larger-framed 6-shot (sub-JFrame size) double action wheelgun in .22 caliber.

Wish S&W would expand production and choices with their M317's, would want a round butt 4 or 5 or 6incher!

Wish Thompson/Center would offer their Hot Shot singleshot in all the other rimfires besides the Long Rifle.

Would also like to see a handgun verion of the Hot Shot, too.

Wish Ruger would remake the Service Six/Speed Six/Security six wheelguns in .38/.357Mag, but also an 8-shoot version of that gun in a .327 Fed Mag, and 5-shot in .41 Special and even .41Mag.

H&R/Remington Hand-Rifle needs to be offered in .30-40Krag and or 7.62X54R Russ.

Clambo · « **Reply #59 on:** February 19, 2014, 11:06:45 AM »

Id like to see polymer guns disappear completely. Id like to see highly polished, blued guns again. No more spray coatings. Id like to see a Handi Rifle come in a higher grade with walnut wood and no plastic. Id also like to see an H& R double shotgun either SxS or O/U. Id like more rifles offered with Mannlicher stocks. Id like to see good, adjustable triggers, no built in safety locks on everything. I guess we could all go on and on. Ill quit with this. I wish we could change the focus of most of todays shooters from " tactical " i.e. fantasy involving the shooting of people....back towards target shooting and hunting. Seems like today everyone wants to be a gunfighter. That saddens me.