« previous next »
Pages: [1]   Go Down

Author Topic: Need Load Data for 160gr. .309 gas checked for 30-06  (Read 489 times)

0 Members and 1 Guest are viewing this topic.

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Need Load Data for 160gr. .309 gas checked for 30-06
« on: November 23, 2007, 11:32:31 AM »
Got some Cast Bullets coming, Now I need some load Data.
Where do I find it ?
Logged
Failure is not an option
Placer County, Calif.

Offline John Traveler

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
Re: Need Load Data for 160gr. .309 gas checked for 30-06
« Reply #1 on: November 23, 2007, 01:29:24 PM »
The Lyman Cast Bullet Handbook (3rd edition) lists a 160 grain gaschecked cast bullet loading table on page 191.

Suggested starting loads up to maximum loads follow:

RX7 23.0 grains up  maximum of 39.0 grains
H4895  28.0 grains up to maximum of 45.0 grains
IMR-4064  29.0 grains up to maximum of 46.0 grains
IMR-4320  29.0 grains up to maximum of 46.0 grains
760  35.0 grains up to maximum of 50.0 grains

HTH
John
Logged
John Traveler

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Re: Need Load Data for 160gr. .309 gas checked for 30-06
« Reply #2 on: November 23, 2007, 03:37:45 PM »
Thanks  8)
Much Appreciated
Logged
Failure is not an option
Placer County, Calif.
Pages: [1]   Go Up
« previous next »