« previous next »
Pages: [1]   Go Down

Author Topic: G2 youth stock?  (Read 539 times)

0 Members and 1 Guest are viewing this topic.

Offline ken613

  • Trade Count: (0)
  • Member
  • *
  • Posts: 24
G2 youth stock?
« on: November 24, 2007, 12:00:30 PM »
Hey guys....new here, been reading for a while, and now have a question.  I'm looking for a G2 youth stock.  It appears that TC doesn't make one for the G2, but still has them for the old frame.  Anyone give me some possibilities?

Thanks
Ken
Logged

Offline 30-06man

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2604
Re: G2 youth stock?
« Reply #1 on: November 24, 2007, 06:24:16 PM »
Cut the stock to the length you need it.. that is if it is walnut. If it's synthetic you can still cut it down but most likely you will need a slip on recoil pad like the Sims. My suggestion is get a walnut stock and get a pad that fits or slip on and custom fit the stock. Also make sure that you keep your cut right and don't mess it up. And Sims makes a  grind to fit recoil pad if you can't find anything else that works. G2 stocks cannot be interchanged with contender stocks. And you might be able to find a aftermarket stock for it.
Logged
The sportsman lives his life vicariously. For he secretly yearns to have lived before, in a simpler time. A time when his love for the land, water, fish and wildlife would be more than just part of his life. It would be his state of mind

Rick

Offline Slowpoke Slim

  • Trade Count: (18)
  • A Real Regular
  • ****
  • Posts: 579
  • Gender: Male
Re: G2 youth stock?
« Reply #2 on: November 28, 2007, 12:45:13 AM »
Ken,

When I was looking for a youth stock for my old model contender, I gave up and bought the synthetic stock and had my smith cut it down. He had to build up the inside to take the pad screws again for a new recoil pad. It came out great. It's cut down to just in front of the rear swivel stud (pretty short). The stock was cheap too.

Hope that helps some.
Logged

Offline 30-06man

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2604
Re: G2 youth stock?
« Reply #3 on: November 28, 2007, 06:20:01 AM »
You could have just put on a slip on pad.
Logged
The sportsman lives his life vicariously. For he secretly yearns to have lived before, in a simpler time. A time when his love for the land, water, fish and wildlife would be more than just part of his life. It would be his state of mind

Rick

Offline Slowpoke Slim

  • Trade Count: (18)
  • A Real Regular
  • ****
  • Posts: 579
  • Gender: Male
Re: G2 youth stock?
« Reply #4 on: November 28, 2007, 10:00:37 AM »
There was so little surface area left, the smallest slip on pad would have been far too large to snug up.
Logged

Offline 30-06man

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2604
Re: G2 youth stock?
« Reply #5 on: November 28, 2007, 11:05:11 AM »
Really wow. How long is the whole rifle? It is over 26inches long... right?
Logged
The sportsman lives his life vicariously. For he secretly yearns to have lived before, in a simpler time. A time when his love for the land, water, fish and wildlife would be more than just part of his life. It would be his state of mind

Rick

Offline Slowpoke Slim

  • Trade Count: (18)
  • A Real Regular
  • ****
  • Posts: 579
  • Gender: Male
Re: G2 youth stock?
« Reply #6 on: November 29, 2007, 04:22:31 AM »
Oh yes, no problems there. It's for my daughter's set up, which is 2 bbls, a 22 lr, and a 6.8 spc, both are 23" long bbls.
Logged

Offline 30-06man

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2604
Re: G2 youth stock?
« Reply #7 on: November 30, 2007, 12:31:01 PM »
Just making sure. I didn't know how long the barrels are one the G2's
Logged
The sportsman lives his life vicariously. For he secretly yearns to have lived before, in a simpler time. A time when his love for the land, water, fish and wildlife would be more than just part of his life. It would be his state of mind

Rick
Pages: [1]   Go Up
« previous next »