« previous next »
Pages: [1]   Go Down

Author Topic: Barrel Diameters ?  (Read 1414 times)

0 Members and 1 Guest are viewing this topic.

Offline Landry308

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Barrel Diameters ?
« on: December 23, 2007, 03:43:28 AM »
Hi guys, new to the site. Wow, what a wealth of info. on the Handi !

I could use a little help with my latest project. I am going to build a .375 wildcat based on the 30-06 case, not sure exactly which version yet, probably AI or Hawk/Scovill. Anyway, need to start with a barrel 26" and 30-06 size case and have it rebored. I would like to use the barrel with the largest diameter possible. Is the diameter of the .25-06 and .280 the same, or is there any difference ? Does anyone know the muzzle diameters ?  Am I overlooking one that meets the criteria and is heavier than these two ? I looked at FAQ and didn't see anything, and called HnR Customer service and the lady didn't know, said she'd have to go measure each one, but didn't offer to do so.
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Barrel Diameters ?
« Reply #1 on: December 23, 2007, 03:56:01 AM »
I will get into the gunlocker later today and get back to you with some diameters of 26" barrels. I do not recall any bull barrel 30-06, .280, or 25-06 barrels ever being offered. There was a limited offering of the .35 Whelen in a 26" barrel a while ago but they are difficult to come by and they were not a bull barrel, I have one and it is a great gun. The .308 was offered in a bull barrel but not in 26" as far as I know. I am not aware of any 26" bull barrel ever being offered by H&R/NEF, since you are planning to rebore the barrel anyway rechambering would not be much more. You may have to
have a barrel stubbed into your desired configuration. I am in the proicess of having a .45 ACP barrel made for my Handi's right now using a 20 gauge barrel as a donor for the stub and a new SS barrel placed into that. If you cannot find the barrel diameter in the length you want stubbing may be the (only) way to go, and perhaps not much, if any, more expensive in the end....<><....:)

P.S. - how rude of me, WELCOME ABOARD!!! I see this is your first post here, this is a great place to come and the guys here are very helpful. Come often, stay late, and Merry Christmas to you and yours....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Barrel Diameters ?
« Reply #2 on: December 23, 2007, 04:18:59 AM »
H&R offers a 22" .308 bull barrel and several other caliber 24" bull barrels (.223, .204) in either fluted or non-fluted configurations but I am not aware of any 26" bull barrels you can get from them. The 24" fluted or non-fluted bull barrels would require rechambering as well as reboring but the reboring is the most expensive of the 2 and most gunsmiths offer a reboring, rechambering combo deal. If you still want a 26" bull barrel I believe you may have to have one stubbed. I would send you some info on my stubbing project but as I understand the Personal Message (PM) system you have to have at least 10 posts to send or receive messages. If you are interested you can e-mail me and I will send you some information....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Landry308

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: Barrel Diameters ?
« Reply #3 on: December 23, 2007, 05:10:03 AM »
Thanks,

I prefer to stay with the rebore/rechamber. I had considered one of the 24" bull barrels, but the rebore guys I talked to were worried about leaving a ring in the chamber if the host gun started out as something short with less body taper, like a .308. If the 25-06 or 280 barrels are as heavy, as say, my .444 barrel, that would be plenty.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel Diameters ?
« Reply #4 on: December 23, 2007, 06:03:15 AM »
The 25-06 and 280 barrels have the same contour, Mac and I both have had 338-06 A-Squares done from 25-06 barrels by Wayne York, I've contemplated and discussed a .375 with Wayne which would work also from either barrel. If you decide you want a .400 something, the 28" 38-55 barrel will be a great donor barrel as it is a heavy contour, I have one in .405 Winchester that shoots extremely well as do our 338s. ;)

Welcome aboard and Merry Christmas!!

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Landry308

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: Barrel Diameters ?
« Reply #5 on: December 23, 2007, 06:36:26 AM »
Thanks again,

My goal is a TSX 235gr at 2700-2800. I can do the .375-06 and start now or wait for the new magnum and do a .375-300 Win. That would give me more flexibility and the ability to load to full H&H mag velocity if I wanted to. I've just never been good at waiting once I get an idea in my head. Glad to hear good reports on Wayne. He was already on my short list, but you guys results with him will make my decision easier.

Do you have the muzzle diameter of the 25-06 ? Or do you know if it's roughly the same countour as the .444 ?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel Diameters ?
« Reply #6 on: December 23, 2007, 06:54:40 AM »
Barrel diameters are listed in the "More Handi Info" section of the FAQs, the 26" barrels aren't all identical, but will be ~.650" at the muzzle, the .444 is much bigger.

FWIW, A 22" Handi 35 Whelen will do over 2800fps with a 225gr TSX, the 26" RMEF Whelen will do 2900fps, but both are hard to find as neither is made anymore.  :'(

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Landry308

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: Barrel Diameters ?
« Reply #7 on: December 23, 2007, 08:01:02 AM »
Thanks, Tim

I've been through the FAQ several times, can't find the list of barrel diameters. Which sub-heading is it under ?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel Diameters ?
« Reply #8 on: December 23, 2007, 08:21:41 AM »
Quote from: quickdtoo on December 23, 2007, 06:54:40 AM
Barrel diameters are listed in the "More Handi Info" section of the FAQs, the 26" barrels aren't all identical, but will be ~.650" at the muzzle, the .444 is much bigger.

FWIW, A 22" Handi 35 Whelen will do over 2800fps with a 225gr TSX, the 26" RMEF Whelen will do 2900fps, but both are hard to find as neither is made anymore.  :'(

Tim

http://www.gboreloaded.com/forums/index.php/topic,26264.msg504312.html#msg504312 reply #4.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Barrel Diameters ?
« Reply #9 on: December 23, 2007, 09:18:18 AM »
Muzzle diameters of the following H&R/NEF barrels that I just measured:

26" .280 Remington = .680

26"  .35 Whelen      = .680

24" BB .223 Rem.    = .773

I hope this helps....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Landry308

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: Barrel Diameters ?
« Reply #10 on: December 23, 2007, 09:58:32 AM »
Yes, thanks

I think I'll start with a .243 BB if Wayne thinks a ring won't be left in the chamber at the old shoulder location. I'll ask him after the holidays. Guess I could use .223 BB if resizing the extractor won't be a problem for him ?
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Barrel Diameters ?
« Reply #11 on: December 23, 2007, 10:56:52 AM »
no problem I am sure, he can do it all....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley
Pages: [1]   Go Up
« previous next »