Author Topic: Optima Elite Chambers  (Read 812 times)

0 Members and 1 Guest are viewing this topic.

Offline hawgmaster

  • Trade Count: (1)
  • Member
  • *
  • Posts: 61
Optima Elite Chambers
« on: January 07, 2008, 05:23:03 PM »
I was checking out on these rifles at Academy Sports the other day, looked and felt nice, had a affordable price on it as well.
My question is this, how deep are the throats on these rilfes, are they better than the Handi-rifle ?
Anyone doing any handloads for these rifles ? what about accuracy ?
Thanks

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Optima Elite Chambers
« Reply #1 on: January 07, 2008, 05:59:20 PM »
I handload for my 7mm-08 and 300WinMag, throats are decent, not problems reaching the lands, look at the range reports for accuracy results, there are several in this forum, with only 7 pages to check. ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline hawgmaster

  • Trade Count: (1)
  • Member
  • *
  • Posts: 61
Re: Optima Elite Chambers
« Reply #2 on: January 08, 2008, 10:10:14 AM »
Hey Thanks Tim,
When I get some time tonight I will check out the range reports.

Offline texashooter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
Re: Optima Elite Chambers
« Reply #3 on: January 10, 2008, 06:59:02 AM »
Are you setting the over all length of the bullets  to the max ? I just loaded up my 7 mm 08 (first batch) and will go to the range Sat. I think the book says that its 2.800 over all length max which is what I loaded mine up for.  Loads seem to chamber alright, haven't shot one yet

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Optima Elite Chambers
« Reply #4 on: January 10, 2008, 07:20:31 AM »
Book data/SAAMI recommended COLs are made to be sure the rounds feed thru actions on repeaters, a moot issue on a single shot, as long as you don't seat shorter than the book recommended COL, there's no problem, but there can be a nice accuracy advantage seating longer to or close to the lands. ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Re: Optima Elite Chambers
« Reply #5 on: January 13, 2008, 06:12:29 PM »


I've had real good luck just loading out to the factory recommended lengths in my 243..308..45-70...others have too..

Mac
You can cry me a river... but...build me a bridge and then get over it...