Author Topic: Hornady v-max  (Read 880 times)

0 Members and 1 Guest are viewing this topic.

Offline CLEM

  • Trade Count: (0)
  • Member
  • *
  • Posts: 42
Hornady v-max
« on: January 09, 2008, 09:17:26 AM »
Hello need help looking for load data for 87gr v-max with IMR4350 in .243win. The IMR book I have dose not list the 87gr v-max and the Hornady book dose not have IMR4350 powder. Can anyone point me in the right direction. Thanks  Clem

Offline GrampaMike

  • GBO Supporter
  • Trade Count: (3)
  • A Real Regular
  • *****
  • Posts: 904
  • Gender: Male
Re: Hornady v-max
« Reply #1 on: January 09, 2008, 09:41:34 AM »
Clem

243 Winchester
Case 2.035"
87 grain Hornady V-Max (22440)
C.O.L. 2.700"

IMR 4350 40.8 grains to 42.5 grains

Mike
Grampa Mike
U.S. Army Retired

"Say what you mean, mean what you say"
Father of 2 GREAT sons, and 9 grandchildren.

Offline CLEM

  • Trade Count: (0)
  • Member
  • *
  • Posts: 42
Re: Hornady v-max
« Reply #2 on: January 09, 2008, 10:04:13 AM »
Thanks Mike what is your source, I would like to get another manual what would you recommend.

Offline pagris

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 130
Re: Hornady v-max
« Reply #3 on: January 11, 2008, 06:16:20 AM »
CLEM:  Steve's Reloading Pages shows the following for 85 - 87 grain bullets in the .243:

IMR 4350  37.4 to 45.0 grains

http://stevespages.com/page8.htm

Click on the Reloading Data Target.

Although I don't have the exact load info in front of me, my Ruger 77VT shoots tiny little groups with the 87 grain V-Max and IMR 4350 - as I recall, my loads have been from 38.0 to 40.0 grains.
Thanks, Dad, for taking me into the great outdoors.

Offline njanear

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 207
  • Gender: Male
    • www.geocities.com/njanear13
Re: Hornady v-max
« Reply #4 on: January 11, 2008, 03:00:35 PM »
Clem:  Have you checked out http://data.hodgdon.com/ ?  I know you were specifically asking about the 87gr but they do list the IMR4350 loads for both 85gr and 90gr to give you bracket points.
Njanear 
    12B/21B - Combat Engineer, the way to B           1985 - 1996 GaARNG
Atlanta, GA

Offline CLEM

  • Trade Count: (0)
  • Member
  • *
  • Posts: 42
Re: Hornady v-max
« Reply #5 on: January 17, 2008, 04:02:19 AM »
I just received an e-mail back from IMR they gave me a starting load of 43gr . I had already worked up to 42.5gr with no pressure signs and had average groups so maybe I will try another half grain or so, unfortunately  they did not give me a max charge.