« previous next »
Pages: [1]   Go Down

Author Topic: Bullets for Swiss K31  (Read 556 times)

0 Members and 1 Guest are viewing this topic.

Offline blackpowderbill

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 287
  • Gender: Male
Bullets for Swiss K31
« on: January 13, 2008, 03:10:13 AM »
I am having trouble finding CBs for my K31. The 174gr Lymans I have cast for my 20-06 and 30-40 will not wok. First, the bore ridding section of the bullet will not enter the bore, so I need a front end smaller than .295. Secondly, the rifling begins about .010 or so in front of the case mouth, this means I need a short groove diameter section and a long bore riding section as I do not want the base and gas check any lower than the base of the case neck.
  Are there any standard molds that will cast the bullet I need in the 150 to 200 grain range?
Logged
People are like slinkies, they serve no purpose yet they bring a smile to your face when you push them down the stairs.

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: Bullets for Swiss K31
« Reply #1 on: January 14, 2008, 01:48:22 AM »
I've had great luck with the Lee C-312-155-2R in mine, sized to .309. It feeds through the magazine properly, and groups way better than an iron sighted military rifle has any right to.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline blackpowderbill

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 287
  • Gender: Male
Re: Bullets for Swiss K31
« Reply #2 on: January 14, 2008, 09:04:02 AM »
Thanks, I'll  look into getting some to try.
Logged
People are like slinkies, they serve no purpose yet they bring a smile to your face when you push them down the stairs.

Offline garandsrus

  • Trade Count: (1)
  • Member
  • *
  • Posts: 44
Re: Bullets for Swiss K31
« Reply #3 on: January 18, 2008, 03:48:18 PM »
Bill,

I have had pretty good luck with the Lyman 311413 and 311329 in the K-31.  If you would like to try them I can send you some samples.  I have also shot 311291 and 311284 in the K-31. 

John
Logged
Pages: [1]   Go Up
« previous next »